{"users":[{"id":1,"username":"OnefinityCNC","name":"Onefinity CNC Official ✅","avatar_template":"/user_avatar/forum.onefinitycnc.com/onefinitycnc/{size}/7_2.png","admin":true,"trust_level":4},{"id":10460,"username":"Woody515","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/e0b2c6/{size}.png","trust_level":1},{"id":4160,"username":"Woodworking_Pilot","name":"E D","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/e9bcb4/{size}.png","trust_level":2},{"id":16086,"username":"william.williamkane7","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/91b2a8/{size}.png","trust_level":1},{"id":2550,"username":"gadget01","name":"Adam","avatar_template":"/user_avatar/forum.onefinitycnc.com/gadget01/{size}/8754_2.png","trust_level":2},{"id":2120,"username":"SailorMike","name":"Michael Bruck","avatar_template":"/user_avatar/forum.onefinitycnc.com/sailormike/{size}/3290_2.png","trust_level":2},{"id":10698,"username":"Nate2078","name":"Nate","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/n/ba9def/{size}.png","trust_level":2},{"id":926,"username":"jnordyke","name":"John Nordyke","avatar_template":"/user_avatar/forum.onefinitycnc.com/jnordyke/{size}/1881_2.png","trust_level":1},{"id":4301,"username":"johnangel1977","name":"John Angel","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/e68b1a/{size}.png","trust_level":1},{"id":8534,"username":"Ken5","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/f0a364/{size}.png","trust_level":2},{"id":7709,"username":"mherring54","name":"Michael","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/ed8c4c/{size}.png","trust_level":1},{"id":10927,"username":"FredG","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/f/a698b9/{size}.png","trust_level":1},{"id":6561,"username":"Jazzybluz14","name":"JM","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/7bcc69/{size}.png","trust_level":1},{"id":13399,"username":"L.M","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/l/a87d85/{size}.png","trust_level":2},{"id":3237,"username":"tjp52","name":"Tom","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/34f0e0/{size}.png","trust_level":2},{"id":8939,"username":"tahoe1840","name":"Scott D","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/90db22/{size}.png","trust_level":2},{"id":6805,"username":"calbert","name":"Carl Albert","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/e274bd/{size}.png","trust_level":1},{"id":6206,"username":"ds53652","name":"Roger","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/3ec8ea/{size}.png","trust_level":2},{"id":6269,"username":"ahandeman","name":"Troy Johnson","avatar_template":"/user_avatar/forum.onefinitycnc.com/ahandeman/{size}/22002_2.png","trust_level":2},{"id":4655,"username":"HardtailSr","name":"robert mainville","avatar_template":"/user_avatar/forum.onefinitycnc.com/hardtailsr/{size}/35326_2.png","trust_level":2},{"id":13598,"username":"JimmyBuckets","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/{size}.png","trust_level":2},{"id":9822,"username":"Diesel_ss","name":"Jeff","avatar_template":"/user_avatar/forum.onefinitycnc.com/diesel_ss/{size}/29544_2.png","trust_level":2},{"id":3171,"username":"WmColl46","name":"William","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/35a633/{size}.png","trust_level":2},{"id":12767,"username":"Dragonhill","name":"Thomas","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/a698b9/{size}.png","trust_level":1},{"id":795,"username":"Clarkhouse11","name":"Gary","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/b19c9b/{size}.png","trust_level":1},{"id":796,"username":"AndyP","name":"Badger","avatar_template":"/user_avatar/forum.onefinitycnc.com/andyp/{size}/1106_2.png","trust_level":2},{"id":10691,"username":"IncrementalDesigns","name":"Incremental Designs","avatar_template":"/user_avatar/forum.onefinitycnc.com/incrementaldesigns/{size}/31328_2.png","trust_level":2},{"id":5702,"username":"tgunr","name":"Dave Carlton","avatar_template":"/user_avatar/forum.onefinitycnc.com/tgunr/{size}/10947_2.png","trust_level":2},{"id":2485,"username":"JimHatch","name":"Jim Hatch","avatar_template":"/user_avatar/forum.onefinitycnc.com/jimhatch/{size}/3928_2.png","trust_level":3},{"id":6872,"username":"sponzo","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/s/48db29/{size}.png","trust_level":1},{"id":10055,"username":"Adriel","name":"Adriel","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/a/f07891/{size}.png","trust_level":1},{"id":9542,"username":"Mick427","name":"Mick","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/ce7236/{size}.png","trust_level":2},{"id":12012,"username":"Dabone","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/96bed5/{size}.png","trust_level":0},{"id":3491,"username":"SilvioPavarino","name":"Silvio Pavarino","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/s/6f9a4e/{size}.png","trust_level":1},{"id":12586,"username":"WouldWork","name":"Will","avatar_template":"/user_avatar/forum.onefinitycnc.com/wouldwork/{size}/32979_2.png","trust_level":2},{"id":12464,"username":"Macswoods","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/ad7895/{size}.png","trust_level":2},{"id":13529,"username":"jwarmoth","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/7cd45c/{size}.png","trust_level":1},{"id":8584,"username":"gilbee","name":"gil.arevalo@gmail.com","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/g/0ea827/{size}.png","trust_level":2},{"id":1171,"username":"Donkel","name":"Don K","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/3e96dc/{size}.png","trust_level":2},{"id":4762,"username":"Off-kilter","name":"Charles Anderson","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/o/a9adbd/{size}.png","trust_level":2},{"id":12496,"username":"MiniSkateLabs","name":"Don D'Angelo","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/9d8465/{size}.png","trust_level":1},{"id":3810,"username":"newbiee","name":"Preston Bowden","avatar_template":"/user_avatar/forum.onefinitycnc.com/newbiee/{size}/8326_2.png","trust_level":2},{"id":9357,"username":"BPSWoodworks","name":"Mike Beckwith","avatar_template":"/user_avatar/forum.onefinitycnc.com/bpswoodworks/{size}/32739_2.png","trust_level":1},{"id":133,"username":"Kat","name":"Rick","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/b19c9b/{size}.png","trust_level":2},{"id":94,"username":"GregoryG","name":"Greg Martinez","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/g/97f17d/{size}.png","trust_level":2},{"id":1635,"username":"349iq2345","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/{size}.png","trust_level":0},{"id":5525,"username":"SanderCreations","name":"Dave","avatar_template":"/user_avatar/forum.onefinitycnc.com/sandercreations/{size}/21310_2.png","trust_level":2},{"id":2438,"username":"Storm27m","name":"Josh","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/s/a587f6/{size}.png","trust_level":2},{"id":4989,"username":"Captain","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/f17d59/{size}.png","trust_level":2},{"id":10247,"username":"CMcDaniel","name":"Craig","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/a698b9/{size}.png","trust_level":2},{"id":665,"username":"Eddie","name":"Eddie","avatar_template":"/user_avatar/forum.onefinitycnc.com/eddie/{size}/964_2.png","trust_level":2},{"id":6018,"username":"cjcarpenter82","name":"CJ Carpenter","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/ebca7d/{size}.png","trust_level":1},{"id":6638,"username":"lloydy2k","name":"Lloyd Pereira","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/l/e9a140/{size}.png","trust_level":1},{"id":6635,"username":"Germanuser","name":"Christoph Johannsmann","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/g/ed8c4c/{size}.png","trust_level":0},{"id":4706,"username":"saltymate","name":"Jerron","avatar_template":"/user_avatar/forum.onefinitycnc.com/saltymate/{size}/9071_2.png","trust_level":2},{"id":11936,"username":"keciacowden","name":"Greg's Queen","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/c57346/{size}.png","trust_level":0}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"filter":"latest","more_topics_url":"/c/accessories/j-tech-laser/11?page=1","per_page":30,"topics":[{"fancy_title":"About the J Tech Laser category","id":20,"title":"About the J Tech Laser category","slug":"about-the-j-tech-laser-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2020-06-24T00:35:16.301Z","last_posted_at":null,"bumped":true,"bumped_at":"2020-06-24T00:36:27.780Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Pew Pew. \nAll things laser. \nYou can visit J Tech Photonics to learn more.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1324,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":11,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"J tech lasers which one","id":40224,"title":"J tech lasers which one","slug":"j-tech-lasers-which-one","posts_count":25,"reply_count":20,"highest_post_number":25,"image_url":null,"created_at":"2026-09-19T22:04:43.219Z","last_posted_at":"2026-10-04T22:19:49.269Z","bumped":true,"bumped_at":"2026-10-04T22:19:49.269Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"anyone use j tech lasers I’m looking to get into lasering and looking for some info on which one to get any help would be appreciated.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":275,"like_count":17,"has_summary":false,"last_poster_username":"SailorMike","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":10460,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4160,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":16086,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2550,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Laser Smoke Reduction","id":40261,"title":"Laser Smoke Reduction","slug":"laser-smoke-reduction","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/6/8/684bb050b6039bf3447afec8f35185787b4e072c_2_1024x647.jpeg","created_at":"2026-09-26T21:09:38.162Z","last_posted_at":"2026-09-26T21:09:38.272Z","bumped":true,"bumped_at":"2026-09-26T21:09:38.272Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve developed a method that greatly reduces the amount of smoke in my shop generated by my JTech 34-W laser. \nI sealed the bottom plate of my honeycomb to the main body with Gorilla Tape. This took care of the smoke tha…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":109,"like_count":3,"has_summary":false,"last_poster_username":"SailorMike","category_id":11,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Macros for Jtech crosshair alignment laser","id":40162,"title":"Macros for Jtech crosshair alignment laser","slug":"macros-for-jtech-crosshair-alignment-laser","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-09-12T02:48:34.015Z","last_posted_at":"2026-09-12T16:09:59.948Z","bumped":true,"bumped_at":"2026-09-12T16:09:59.948Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Gemini is telling me that it is possible to set up a macro to turn the alignment laser on and off on the 3 in 1 64W Jtech laser.  Does anyone know if this is actually possible?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":75,"like_count":0,"has_summary":false,"last_poster_username":"SailorMike","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":10698,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jtech Laser Not Firing","id":35876,"title":"Jtech Laser Not Firing","slug":"jtech-laser-not-firing","posts_count":10,"reply_count":4,"highest_post_number":10,"image_url":null,"created_at":"2025-10-18T16:00:54.674Z","last_posted_at":"2026-08-28T19:10:09.115Z","bumped":true,"bumped_at":"2026-08-28T19:10:09.115Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve sent this issue to both Onefinity and JTech, but with the weekend here I’m hoping a forum member can get back to me before they do on Monday… \nI’ve just installed the 7w+ Laser kit on my new OF Woodworker Pro.  The …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":302,"like_count":5,"has_summary":false,"last_poster_username":"jnordyke","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":926,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4301,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":7709,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":10927,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"JTec Laser question","id":39212,"title":"JTec Laser question","slug":"jtec-laser-question","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/8/5/854d9c650ca979634920d46c82229db19b319013_2_768x1024.jpeg","created_at":"2026-06-26T00:15:36.691Z","last_posted_at":"2026-06-26T02:42:55.173Z","bumped":true,"bumped_at":"2026-06-26T02:42:55.173Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Good day all \nI am hoping somebody has a solution for me… I have a 1Finity X-50 journeyman. I recently messed up my JTech 7w laser housing. Does \n  \n  \nanybody know if I can print a new housing or did I just blow up $500…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":84,"like_count":0,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":6561,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Cutting Technique Suggestions?","id":38753,"title":"Cutting Technique Suggestions?","slug":"cutting-technique-suggestions","posts_count":19,"reply_count":10,"highest_post_number":20,"image_url":null,"created_at":"2026-05-19T18:42:40.736Z","last_posted_at":"2026-05-29T17:53:07.217Z","bumped":true,"bumped_at":"2026-05-29T17:53:07.217Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi, all; I’ve recently installed my new JTech 34-Watt laser, and made a few test cuts in the 3mm ply I plan to use. I’m having a few issues, and I wonder if anyone has work-arounds. I’m using the VCarve laser addon. My i…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":331,"like_count":24,"has_summary":false,"last_poster_username":"SailorMike","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":2120,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3237,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8939,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Laser power / speed test chart","id":38793,"title":"Laser power / speed test chart","slug":"laser-power-speed-test-chart","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2026-05-24T20:06:01.872Z","last_posted_at":"2026-05-24T21:14:22.998Z","bumped":true,"bumped_at":"2026-05-24T21:14:22.998Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have seen a grid type chart that shows the results of burning at different intensity and speeds and was wondering where I could get a copy of the file to load and produce the chart on my redline based onefinity x50 jou…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":78,"like_count":2,"has_summary":false,"last_poster_username":"calbert","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":6805,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lightburn and Tiling","id":38792,"title":"Lightburn and Tiling","slug":"lightburn-and-tiling","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-24T18:50:21.016Z","last_posted_at":"2026-05-24T18:50:21.122Z","bumped":true,"bumped_at":"2026-05-24T18:50:21.122Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"While awaiting my laser accessories to arrive, my Lightburn education continues. I’m working my way up to a large project that will require tiling. I found this video that does a fine job of demonstrating how to do tilin…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":47,"like_count":1,"has_summary":false,"last_poster_username":"SailorMike","category_id":11,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jtech Laser Driver mounting for Redline Controller/HMI?","id":38575,"title":"Jtech Laser Driver mounting for Redline Controller/HMI?","slug":"jtech-laser-driver-mounting-for-redline-controller-hmi","posts_count":14,"reply_count":10,"highest_post_number":14,"image_url":null,"created_at":"2026-04-30T01:37:59.421Z","last_posted_at":"2026-05-19T04:24:55.681Z","bumped":true,"bumped_at":"2026-05-19T04:24:55.681Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just upgraded my Buildbotics based X50 to a redline based system.  The Jtech Laser Driver box mounted perfectly onto the top of the Buildbotics controller.  I do not see anywhere where the Jtech Laser Driver could be m…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":188,"like_count":12,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":6206,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6269,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Laser Simulator?","id":38709,"title":"Laser Simulator?","slug":"laser-simulator","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-14T18:46:51.122Z","last_posted_at":"2026-05-14T18:46:51.211Z","bumped":true,"bumped_at":"2026-05-14T18:46:51.211Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m trying to get to know my new J Tech 34-Watt laser. Does anyone know of a simulator that can accurately simulate laser G Code?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":46,"like_count":0,"has_summary":false,"last_poster_username":"SailorMike","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jtech laser no worky","id":38208,"title":"Jtech laser no worky","slug":"jtech-laser-no-worky","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-18T15:29:56.090Z","last_posted_at":"2026-04-18T15:29:56.190Z","bumped":true,"bumped_at":"2026-04-18T15:29:56.190Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"All, BB controller,  latest firmware with a jtech 7w laser installed. Laser works full blast but inop when selected to manual. I have tried jtech and pwm on the “tool” and nothing. Volt meter to the BB laser port and i d…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":52,"like_count":0,"has_summary":false,"last_poster_username":"Diesel_ss","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":9822,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Up Close and Personal with the Jtech 64w laser","id":31392,"title":"Up Close and Personal with the Jtech 64w laser","slug":"up-close-and-personal-with-the-jtech-64w-laser","posts_count":26,"reply_count":18,"highest_post_number":26,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/5/9/593729672c3856607b6ae187ce87e4dcc3961f4b_2_768x1024.jpeg","created_at":"2025-03-07T15:43:36.701Z","last_posted_at":"2026-04-05T05:56:16.571Z","bumped":true,"bumped_at":"2026-04-05T05:56:16.571Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"For years I have wanted a laser option for my OF Woodworker. So I went bigger than needed with the three-in-one 24-44-64 watt Jtech laser. It’s a lifetime purchase, only when factoring in my age! No regrets, the challeng…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1276,"like_count":42,"has_summary":false,"last_poster_username":"JimmyBuckets","category_id":11,"op_like_count":11,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3171,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":12767,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":795,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"So tell me you folks that use lasers","id":37800,"title":"So tell me you folks that use lasers","slug":"so-tell-me-you-folks-that-use-lasers","posts_count":26,"reply_count":20,"highest_post_number":26,"image_url":null,"created_at":"2026-03-07T15:01:54.400Z","last_posted_at":"2026-03-11T02:05:54.634Z","bumped":true,"bumped_at":"2026-03-11T02:05:54.634Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"What sort, kind, power of laser, would I use to put a logo on aluminum 6061. I am wondering if I could use one to put a logo on my clamps.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":371,"like_count":25,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":796,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Laser engraving on dark hardwood question","id":37825,"title":"Laser engraving on dark hardwood question","slug":"laser-engraving-on-dark-hardwood-question","posts_count":8,"reply_count":5,"highest_post_number":8,"image_url":null,"created_at":"2026-03-10T15:56:08.484Z","last_posted_at":"2026-03-11T02:04:17.869Z","bumped":true,"bumped_at":"2026-03-11T02:04:17.869Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Recently purchased Jtech’s 34W diode laser.  I’ve done a couple of “Material Tests” from Lightburn and also done a test engrave and a test cut using Vcarve and its laser module.  My first true project that I need to deli…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":104,"like_count":12,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":6206,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":10691,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Selling J-Tech 14 watt Pro","id":18779,"title":"Selling J-Tech 14 watt Pro","slug":"selling-j-tech-14-watt-pro","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/5/2/529fe8d8202b80b5ef789bcb613fd70de2fc2d52.jpeg","created_at":"2023-02-13T16:18:02.909Z","last_posted_at":"2026-01-17T19:19:15.890Z","bumped":true,"bumped_at":"2026-01-17T19:19:15.890Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Thought I would post here before putting it up on Ebay, etc. \nGoing to upgrade to a different laser and selling my J-Tech 14 watt which has less than 10 hours on it. This was purchased for my Maslow M2 which has been ret…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":705,"like_count":1,"has_summary":false,"last_poster_username":"tgunr","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":5702,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2485,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":6872,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Laser Material Test Card for VCarve Pro - “Hexasketch”","id":29195,"title":"Laser Material Test Card for VCarve Pro - \"Hexasketch\"","slug":"laser-material-test-card-for-vcarve-pro-hexasketch","posts_count":28,"reply_count":19,"highest_post_number":30,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/1/2/128b9c0653a3d9ec3f8f9c648378231543e2276e_2_1024x746.jpeg","created_at":"2024-11-03T22:56:51.886Z","last_posted_at":"2025-12-26T20:02:52.633Z","bumped":true,"bumped_at":"2025-12-26T20:02:52.633Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"For those Onefinity folks who have a J Tech Laser and want to stick to using the  VCarve Pro’s laser module, it seems laser material test cards are difficult to find. I ended up putting one together myself and wanted to …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1722,"like_count":28,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":11,"op_like_count":7,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":10055,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3171,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9542,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":12012,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jtech Laser not working with G-code","id":36904,"title":"Jtech Laser not working with G-code","slug":"jtech-laser-not-working-with-g-code","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":null,"created_at":"2025-12-19T14:00:43.936Z","last_posted_at":"2025-12-20T19:14:50.438Z","bumped":true,"bumped_at":"2025-12-20T19:14:50.438Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there, I’ve sent this to the JTech Customer Service last week but haven’t heard back from them (disappointing…), so asking for help on this forum. I’m having issues with my Jtech laser module and trying to troubleshoo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":105,"like_count":1,"has_summary":false,"last_poster_username":"SilvioPavarino","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":3491,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":12586,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline and laser setup","id":36763,"title":"Redline and laser setup","slug":"redline-and-laser-setup","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2025-12-03T22:48:29.484Z","last_posted_at":"2025-12-04T16:49:08.698Z","bumped":true,"bumped_at":"2025-12-04T16:49:08.698Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m considering buying the 24watt laser so I can get rid of my xTool.  Can someone tell me how it works with the redline controller? \nI’m looking for a step by step as far as converting from cnc to laser. \nAlso looking f…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":223,"like_count":4,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":11,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":12464,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"1f Rotary vs JTech rotary question","id":36620,"title":"1f Rotary vs JTech rotary question","slug":"1f-rotary-vs-jtech-rotary-question","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2025-11-24T20:31:19.868Z","last_posted_at":"2025-11-28T00:13:23.737Z","bumped":true,"bumped_at":"2025-11-28T00:13:23.737Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello!  New here and new to laser engraving so I apologize if this is a dumb question but I didn’t see where this has been asked yet (possibly because it is dumb)…. \nIn the context of laser engraving mugs as the first us…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":138,"like_count":4,"has_summary":false,"last_poster_username":"gilbee","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":13529,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8584,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Tips for switching between laser and CNC","id":35926,"title":"Tips for switching between laser and CNC","slug":"tips-for-switching-between-laser-and-cnc","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/f/5/f5069cd8592efeb6fa206775a427ae74965dab07_2_1024x372.png","created_at":"2025-10-22T12:45:14.765Z","last_posted_at":"2025-10-23T21:03:53.379Z","bumped":true,"bumped_at":"2025-10-23T21:03:53.379Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"A couple of things that have come in handy for me with using the Jtech on the Onefinity: \n\nAir Assist Disconnect: I disconnect my laser and take it out of the enclosure when not in use. Rather than unscrew the air assist…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":150,"like_count":4,"has_summary":false,"last_poster_username":"Off-kilter","category_id":11,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1171,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4762,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Jtech Laser accessories","id":35923,"title":"Jtech Laser accessories","slug":"jtech-laser-accessories","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-10-22T02:45:20.384Z","last_posted_at":"2025-10-22T04:21:17.747Z","bumped":true,"bumped_at":"2025-10-22T04:21:17.747Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello, \nI have the 64W Laser accessory, and with it came all the mounting hardware. However, there are 5 little 3d printed blocks with a screwhole tab on them. I assume they are for the little sticky sqaures for routing …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":109,"like_count":3,"has_summary":false,"last_poster_username":"MiniSkateLabs","category_id":11,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":12496,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Anyone have their 44w dialed in?","id":34777,"title":"Anyone have their 44w dialed in?","slug":"anyone-have-their-44w-dialed-in","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/6/0/60bb8560ea35a53a5b304c38a8050572db68d7a5_2_820x1024.jpeg","created_at":"2025-07-31T15:03:19.420Z","last_posted_at":"2025-09-02T14:47:01.234Z","bumped":true,"bumped_at":"2025-09-02T14:47:01.234Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey everyone, I’m working on dialing in my 44W laser (using the Vectric laser module), and could use some input from those with more experience. \nHere’s what I’ve done so far: \n\n\nFirst test: 10% power, 0.006" crosshat…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":337,"like_count":7,"has_summary":false,"last_poster_username":"newbiee","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":3810,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6269,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2485,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":10691,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":9357,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Machine “stuttering” with Lightburn","id":10451,"title":"Machine \"stuttering\" with Lightburn","slug":"machine-stuttering-with-lightburn","posts_count":36,"reply_count":20,"highest_post_number":37,"image_url":null,"created_at":"2022-01-17T19:20:36.931Z","last_posted_at":"2025-08-31T16:15:22.626Z","bumped":true,"bumped_at":"2025-08-31T16:15:22.626Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I decided to start this thread as I first posted in the firmware update. This is not, as far as I can tell related to the firmware update at all. \nTo recap; when using Lightburn with Jarvis, stucki, or ditther options th…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":3213,"like_count":22,"has_summary":false,"last_poster_username":"Ken5","category_id":11,"op_like_count":2,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":133,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":94,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1635,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":5525,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Laser Module Wall Storage Mount","id":35083,"title":"Laser Module Wall Storage Mount","slug":"laser-module-wall-storage-mount","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/0/b/0b3631e49115fa95872641472116b385276bfa9a_2_771x1024.jpeg","created_at":"2025-08-16T17:50:06.755Z","last_posted_at":"2025-08-16T17:50:06.816Z","bumped":true,"bumped_at":"2025-08-16T17:50:06.816Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I created a wall mount for the 7W+, 14W, 24W, & 44W (it may also work with the 64W, but I think there may be a conflict there (if someone has one let me know). I’ve uploaded the model to Makerworld link below, if you’d l…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":89,"like_count":4,"has_summary":false,"last_poster_username":"IncrementalDesigns","category_id":11,"op_like_count":4,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":10691,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Laser issue with new computer","id":34744,"title":"Laser issue with new computer","slug":"laser-issue-with-new-computer","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/6/f/6f483d3f93656a65feaab6a79690779a03fa8d07.jpeg","created_at":"2025-07-29T21:25:06.546Z","last_posted_at":"2025-07-30T20:22:30.810Z","bumped":true,"bumped_at":"2025-07-30T20:22:30.810Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey ya’ll, I’m having some troubles setting up Lightburn on a new computer.  I have a Woodworker X-50 with the 7w JTEC laser.  Using my old laptop to create the Gcode in Lightburn, everything works just fine and I can us…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":125,"like_count":1,"has_summary":false,"last_poster_username":"Storm27m","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":2438,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Connector replacement for 7w Jtech Laser","id":34464,"title":"Connector replacement for 7w Jtech Laser","slug":"connector-replacement-for-7w-jtech-laser","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/9/9/993823f381500724f7f494bb811e8ca417af2f19_2_576x1024.jpeg","created_at":"2025-07-13T06:28:09.807Z","last_posted_at":"2025-07-13T11:58:47.453Z","bumped":true,"bumped_at":"2025-07-13T11:58:47.453Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My jtech 7w laser wire connection has started to go. The laser itself will randomly not fire for random amounts of time. When I gently squeeze the middle white connectors together, the laser seems to work. I tried to res…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":77,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4989,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Stray Lines on Laser Projects - FIXED!","id":34401,"title":"Stray Lines on Laser Projects - FIXED!","slug":"stray-lines-on-laser-projects-fixed","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-07-09T20:38:04.705Z","last_posted_at":"2025-07-09T20:41:36.885Z","bumped":true,"bumped_at":"2025-07-09T20:41:36.885Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey everyone… \nThere have been several threads on stray or lazy lines that show up in laser projects and I’ve had the same problem on a couple of mine. \nI did some experimenting and found that the stray lines were showin…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":123,"like_count":3,"has_summary":false,"last_poster_username":"CMcDaniel","category_id":11,"op_like_count":2,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":10247,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"On Board Storage?","id":30947,"title":"On Board Storage?","slug":"on-board-storage","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2025-02-15T22:07:33.251Z","last_posted_at":"2025-06-05T19:17:58.729Z","bumped":true,"bumped_at":"2025-06-05T19:17:58.729Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"What do the rest of you do with your laser when it’s not in use?  I’ve thought about just leaving it in the magnetic mount where it is really out of the way except when using the very shortest of bits - maybe enclosing i…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":131,"like_count":0,"has_summary":false,"last_poster_username":"Eddie","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":926,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":665,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"J Tech 14 watt library","id":17408,"title":"J Tech 14 watt library","slug":"j-tech-14-watt-library","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2022-12-15T02:26:32.659Z","last_posted_at":"2025-05-26T15:07:58.878Z","bumped":true,"bumped_at":"2025-05-26T15:07:58.878Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"does anyone know where i can download the library for feeds and speeds for commonly used materials to use in light burn?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":2053,"like_count":3,"has_summary":false,"last_poster_username":"keciacowden","category_id":11,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":6018,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6638,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6635,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":4706,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11936,"primary_group_id":null,"flair_group_id":null}]}]}}