{"users":[{"id":1,"username":"OnefinityCNC","name":"Onefinity CNC Official ✅","avatar_template":"/user_avatar/forum.onefinitycnc.com/onefinitycnc/{size}/7_2.png","admin":true,"trust_level":4},{"id":14255,"username":"edmcgov","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/e/e495f1/{size}.png","trust_level":2},{"id":13636,"username":"Pops1","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/ecb155/{size}.png","trust_level":1},{"id":4655,"username":"HardtailSr","name":"robert mainville","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/h/6a8cbe/{size}.png","trust_level":3},{"id":4673,"username":"peeceejay","name":"Paul Jones (Bees Boards)","avatar_template":"/user_avatar/forum.onefinitycnc.com/peeceejay/{size}/35114_2.png","trust_level":1},{"id":8534,"username":"Ken5","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/f0a364/{size}.png","trust_level":2},{"id":13598,"username":"JimmyBuckets","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/{size}.png","trust_level":3},{"id":2485,"username":"JimHatch","name":"Jim Hatch","avatar_template":"/user_avatar/forum.onefinitycnc.com/jimhatch/{size}/3928_2.png","trust_level":3},{"id":3514,"username":"oakhillmillworks","name":"Christy","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/o/e19adc/{size}.png","trust_level":1},{"id":14652,"username":"Rumor","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/rumor/{size}/35148_2.png","trust_level":1},{"id":12775,"username":"SamuelBarker","name":"Sam","avatar_template":"/user_avatar/forum.onefinitycnc.com/samuelbarker/{size}/34838_2.png","trust_level":1},{"id":13399,"username":"L.M","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/l/a87d85/{size}.png","trust_level":3},{"id":12452,"username":"joejk","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/{size}.png","trust_level":2},{"id":10468,"username":"TommyObar","name":"TObar","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/bcef8e/{size}.png","trust_level":3},{"id":5615,"username":"Bork","name":"Mike","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/76d3ee/{size}.png","trust_level":2},{"id":688,"username":"TMToronto","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/7ea924/{size}.png","trust_level":3},{"id":3237,"username":"tjp52","name":"Tom","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/34f0e0/{size}.png","trust_level":2},{"id":6206,"username":"ds53652","name":"Roger","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/3ec8ea/{size}.png","trust_level":2},{"id":13632,"username":"Zeus63","name":"Steve","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/z/a183cd/{size}.png","trust_level":1},{"id":14085,"username":"Generous_Cowbell","name":"Dan","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/g/3bc359/{size}.png","trust_level":2},{"id":9560,"username":"RogueMachinist","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/r/90ced4/{size}.png","trust_level":2},{"id":13000,"username":"wadreamin","name":"jim","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/4da419/{size}.png","trust_level":1},{"id":6848,"username":"BigHick","name":"John Wilson","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/34f0e0/{size}.png","trust_level":2},{"id":13865,"username":"Xslana","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/x/7ab992/{size}.png","trust_level":1},{"id":13526,"username":"sbetts","name":"Steve","avatar_template":"/user_avatar/forum.onefinitycnc.com/sbetts/{size}/33927_2.png","trust_level":2},{"id":13585,"username":"Jcov","name":"Jeff Covington","avatar_template":"/user_avatar/forum.onefinitycnc.com/jcov/{size}/34655_2.png","trust_level":1},{"id":631,"username":"pwpacp","name":"Phil","avatar_template":"/user_avatar/forum.onefinitycnc.com/pwpacp/{size}/1718_2.png","trust_level":3},{"id":14107,"username":"AKWoodworking","name":"Chris","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/a/a3d4f5/{size}.png","trust_level":1},{"id":1416,"username":"ppd417","name":"Paul Dino","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/9dc877/{size}.png","trust_level":2},{"id":8683,"username":"johnwillyn","name":"JohnL","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/a88e4f/{size}.png","trust_level":1},{"id":10490,"username":"RJensen","name":"Roger Jensen","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/r/71e660/{size}.png","trust_level":2},{"id":13582,"username":"ERBIUM-68","name":"Chris","avatar_template":"/user_avatar/forum.onefinitycnc.com/erbium-68/{size}/34047_2.png","trust_level":1},{"id":13766,"username":"SCSailor","name":"Nick","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/s/6bbea6/{size}.png","trust_level":1},{"id":13499,"username":"tank624","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/6f9a4e/{size}.png","trust_level":2},{"id":14629,"username":"p12nash","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/f6c823/{size}.png","trust_level":1},{"id":2208,"username":"dsunds","name":"David","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/50afbb/{size}.png","trust_level":2},{"id":14258,"username":"dwhite1031","name":"Doug White","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/b77776/{size}.png","trust_level":1},{"id":8590,"username":"Woodpecker","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/woodpecker/{size}/27447_2.png","trust_level":2},{"id":6904,"username":"cyberlynx1","name":"scott gafkjen","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/7ea924/{size}.png","trust_level":2},{"id":14050,"username":"Bryan_K","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/dbc845/{size}.png","trust_level":1},{"id":5697,"username":"sn95gts","name":"sn95gts","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/s/e0b2c6/{size}.png","trust_level":2},{"id":3247,"username":"ChrisM","name":"Chris Moore","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/47e85d/{size}.png","trust_level":2},{"id":12179,"username":"Redlinecnc","name":"RedlineCNC Official","avatar_template":"/user_avatar/forum.onefinitycnc.com/redlinecnc/{size}/32571_2.png","moderator":true,"trust_level":3},{"id":13012,"username":"JGillHome","name":"Jonathan","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/{size}.png","trust_level":1}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/elite-series-gen-2/191?page=1","per_page":30,"topics":[{"fancy_title":"About the Gen 2 Elite Series category","id":36571,"title":"About the Gen 2 Elite Series category","slug":"about-the-gen-2-elite-series-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/7/5/757814d343fac90e908eff5679c289b0b57a07a5_2_1024x330.jpeg","created_at":"2025-11-22T16:11:14.922Z","last_posted_at":"2025-11-22T16:11:14.927Z","bumped":true,"bumped_at":"2025-11-22T16:11:14.922Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Introducing The All New Gen 2 Elite Series by Onefinity CNC.\nThe most popular Onefinity CNC Elite series, refined for the next generation of CNC routers. \nForeman (49x49") Starting at\n$2375","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":389,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":191,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Batch 4 - Your Order is on its way!","id":38186,"title":"Batch 4 - Your Order is on its way!","slug":"batch-4-your-order-is-on-its-way","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/d/9/d92771fbbd9fe2569576a53bc8f0c27855c51ebb.png","created_at":"2026-04-16T15:35:54.155Z","last_posted_at":"2026-04-16T15:35:54.268Z","bumped":true,"bumped_at":"2026-04-16T15:35:54.268Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Today I received an email from Onefinity that my order is on its way (Batch 4 - Elite Foreman Gen2 without HMI).  So excited to get my CNC journey started.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":9,"like_count":1,"has_summary":false,"last_poster_username":"edmcgov","category_id":191,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":14255,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Order of Operation Redline","id":38185,"title":"Order of Operation Redline","slug":"order-of-operation-redline","posts_count":3,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-04-16T11:51:51.779Z","last_posted_at":"2026-04-16T13:02:39.822Z","bumped":true,"bumped_at":"2026-04-16T13:02:39.822Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Several months ago I saw a video on YouTube by Mitchell’s Woodwork where he created a document, start to finish on running and creating a project using the Masso Controller. \nHas anyone created such a step by step docume…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":33,"like_count":2,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":13636,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"First cuts done - and odd behavior found","id":38152,"title":"First cuts done - and odd behavior found","slug":"first-cuts-done-and-odd-behavior-found","posts_count":22,"reply_count":15,"highest_post_number":23,"image_url":null,"created_at":"2026-04-12T02:15:51.394Z","last_posted_at":"2026-04-15T22:26:52.418Z","bumped":true,"bumped_at":"2026-04-15T22:26:52.418Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Ok, I’ve done my first afternoons worth of projects on my new Redline Gen2 Elite Foreman - and run into what feel like bugs I can’t find much on when I dig around. These may be things I’m missing .. wondering if this mir…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":220,"like_count":23,"has_summary":false,"last_poster_username":"peeceejay","category_id":191,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":true,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":4673,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2485,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3514,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Newbie (I know I know I can hear the *sighs*)","id":38174,"title":"Newbie (I know I know I can hear the *sighs*)","slug":"newbie-i-know-i-know-i-can-hear-the-sighs","posts_count":10,"reply_count":3,"highest_post_number":10,"image_url":null,"created_at":"2026-04-14T19:38:22.273Z","last_posted_at":"2026-04-15T18:31:32.609Z","bumped":true,"bumped_at":"2026-04-15T18:31:32.609Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi there. I received all the pieces and parts to the CnC. My first of many questions is (and I also asked support this), I have a journeyman with the QCW and 3 of the slots are 8.75 inches - if I have one that is 8.5 wil…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":113,"like_count":18,"has_summary":false,"last_poster_username":"TommyObar","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":true,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14652,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":12775,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":12452,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10468,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Facing toolpath is very rough","id":38055,"title":"Facing toolpath is very rough","slug":"facing-toolpath-is-very-rough","posts_count":60,"reply_count":42,"highest_post_number":60,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/9/d/9dd4a85e18f33ab01a931639743a21e48428a2d3_2_768x1024.jpeg","created_at":"2026-04-02T00:25:03.905Z","last_posted_at":"2026-04-14T21:59:44.238Z","bumped":true,"bumped_at":"2026-04-14T21:59:44.238Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am using a Gen 2 Redline Foreman and getting a unique problem I never had with my X50 woodworker. I face with a 1/4” tool since ATC is not available yet, and I used to do the same with the X50. \nSettings are scaled way…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":367,"like_count":56,"has_summary":true,"last_poster_username":"JimmyBuckets","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":true,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":5615,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10468,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"What is the procedure (I/O IOT for Redline)","id":38077,"title":"What is the procedure (I/O IOT for Redline)","slug":"what-is-the-procedure-i-o-iot-for-redline","posts_count":7,"reply_count":4,"highest_post_number":7,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/f/1fd136ee94625a7ceb106493293c99dfc2e06808.jpeg","created_at":"2026-04-04T15:55:48.293Z","last_posted_at":"2026-04-12T18:53:33.234Z","bumped":true,"bumped_at":"2026-04-12T18:53:33.234Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"this link looks nothing like using the redline mini IN/OUT that came with my gen 2. \nConnecting an IoT Relay - RealTime CNC Documenation Hub can someone post how to set up the redline mini IN/OUT to control the vac for m…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":113,"like_count":9,"has_summary":false,"last_poster_username":"HardtailSr","category_id":191,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3237,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ok onefinity time to step up","id":38058,"title":"Ok onefinity time to step up","slug":"ok-onefinity-time-to-step-up","posts_count":16,"reply_count":11,"highest_post_number":16,"image_url":null,"created_at":"2026-04-02T14:58:24.747Z","last_posted_at":"2026-04-11T12:51:06.426Z","bumped":true,"bumped_at":"2026-04-11T12:51:06.426Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"With the Masso we had a plug and play system to control the vacuum. no fiddley wiring not extra mods and no workaround gymnastics. You just plugged the vac into the port labeled vac, and you could get to work without thi…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":274,"like_count":20,"has_summary":false,"last_poster_username":"HardtailSr","category_id":191,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6206,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Oil port location on the Elite Gen 2 machines","id":38123,"title":"Oil port location on the Elite Gen 2 machines","slug":"oil-port-location-on-the-elite-gen-2-machines","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":null,"created_at":"2026-04-10T11:53:53.672Z","last_posted_at":"2026-04-10T16:12:56.079Z","bumped":true,"bumped_at":"2026-04-10T16:12:56.079Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m a total newbie here and I apologize in advance, but I can’t seem to locate the oil ports on my Journeyman. I’ve tried looking for videos, but they are years old and I believe referring to Gen 1 machines. I only have …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":80,"like_count":7,"has_summary":false,"last_poster_username":"Zeus63","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":13632,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14085,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Gen 2 Bearing Noise","id":38059,"title":"Gen 2 Bearing Noise","slug":"gen-2-bearing-noise","posts_count":13,"reply_count":7,"highest_post_number":13,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/9/6/96a31d301c42413bd1602137edb568acc5d5cd69_2_1024x576.jpeg","created_at":"2026-04-02T18:07:21.053Z","last_posted_at":"2026-04-09T21:52:45.243Z","bumped":true,"bumped_at":"2026-04-09T21:52:45.243Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hi folks, and @Onefinity there was a pretty heated topic a few weeks ago about a “bad” X assembly.  The user claimed it wasn’t right, and when Onefinity sent him a new one, he again said that one wasn’t right either. 1F …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":293,"like_count":19,"has_summary":false,"last_poster_username":"JimmyBuckets","category_id":191,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9560,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13000,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6848,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Gen 2 Rail Homing Issue, Clicking or Thumping sound & White Wiper Check (FAQ)","id":38118,"title":"Gen 2 Rail Homing Issue, Clicking or Thumping sound & White Wiper Check (FAQ)","slug":"gen-2-rail-homing-issue-clicking-or-thumping-sound-white-wiper-check-faq","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/0/b0e2dd3fc0a5495c79364d2f4958cb2b2f0d155b.jpeg","created_at":"2026-04-09T15:06:07.498Z","last_posted_at":"2026-04-09T15:06:07.614Z","bumped":true,"bumped_at":"2026-04-09T15:06:07.614Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"On the Onefinity Gen 2 Elite Series machines a white wiper is used to keep dust from entering the foot and can begin to work its way out of the foot. \nWhen this happens, it can cause a couple of symptoms: \n\nThe rail may …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":90,"like_count":3,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":194,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Patiently waiting","id":37983,"title":"Patiently waiting","slug":"patiently-waiting","posts_count":13,"reply_count":6,"highest_post_number":13,"image_url":null,"created_at":"2026-03-26T17:20:27.929Z","last_posted_at":"2026-04-09T14:42:03.770Z","bumped":true,"bumped_at":"2026-04-09T14:42:03.770Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Anyone from Batch 3 get a shipping notification yet? Sooo close","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":258,"like_count":18,"has_summary":false,"last_poster_username":"AKWoodworking","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":13865,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13526,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13585,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":631,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14107,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Gen 2 WW and Rolling/Folding Stand","id":38100,"title":"Gen 2 WW and Rolling/Folding Stand","slug":"gen-2-ww-and-rolling-folding-stand","posts_count":24,"reply_count":14,"highest_post_number":24,"image_url":null,"created_at":"2026-04-06T19:54:52.488Z","last_posted_at":"2026-04-09T13:27:54.647Z","bumped":true,"bumped_at":"2026-04-09T13:27:54.647Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Just finished assembling my Gen 2 Woodworker on the rolling/folding stand.  No problems, all went well. The only issue I ran into is I honestly didn’t realize how heavy this is (and I don’t even have the spindle installe…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":155,"like_count":21,"has_summary":false,"last_poster_username":"RJensen","category_id":191,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1416,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8683,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10490,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Gen2 Elite Foreman Arrived (in part) Switzerland","id":37908,"title":"Gen2 Elite Foreman Arrived (in part) Switzerland","slug":"gen2-elite-foreman-arrived-in-part-switzerland","posts_count":14,"reply_count":10,"highest_post_number":14,"image_url":null,"created_at":"2026-03-17T12:16:09.126Z","last_posted_at":"2026-04-08T19:22:06.522Z","bumped":true,"bumped_at":"2026-04-08T19:22:06.522Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"First two boxes arrived here in Eglisau Switzerland. \nLooks like the heavy boxes will arrive on Wednesday.  Very impressed that they managed to source the Swiss power plug!  I was sure everything would come with the stan…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":176,"like_count":21,"has_summary":false,"last_poster_username":"HardtailSr","category_id":191,"op_like_count":2,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster, Accepted Answer","user_id":13582,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Is anyone making “shades; for the light sensitive gen 2 x and y rails","id":38091,"title":"Is anyone making \"shades; for the light sensitive gen 2 x and y rails","slug":"is-anyone-making-shades-for-the-light-sensitive-gen-2-x-and-y-rails","posts_count":12,"reply_count":9,"highest_post_number":12,"image_url":null,"created_at":"2026-04-06T15:31:22.805Z","last_posted_at":"2026-04-08T17:07:46.877Z","bumped":true,"bumped_at":"2026-04-08T17:07:46.877Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"If you are I will gladly pay you for three or six:). things do break after all.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":183,"like_count":19,"has_summary":false,"last_poster_username":"sbetts","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13766,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13526,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Riser blocks too thin","id":37855,"title":"Riser blocks too thin","slug":"riser-blocks-too-thin","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":null,"created_at":"2026-03-12T20:41:11.964Z","last_posted_at":"2026-04-08T01:35:02.705Z","bumped":true,"bumped_at":"2026-04-08T01:35:02.705Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"As I am finally putting together my gen 2 journeyman, I notice that even with those thin riser blocks the center of the Y rails is still dragging the table. this doesn’t seem to be normal. Why are they so close to the ta…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":148,"like_count":7,"has_summary":false,"last_poster_username":"wadreamin","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":12775,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13499,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13000,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Gen 2 Elite Foreman CAD Model","id":38105,"title":"Gen 2 Elite Foreman CAD Model","slug":"gen-2-elite-foreman-cad-model","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-07T21:14:17.306Z","last_posted_at":"2026-04-07T21:14:17.402Z","bumped":true,"bumped_at":"2026-04-07T21:14:17.402Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Is there a cad model floating around for the gen 2 elite foreman to use for fusion machine builder etc?  I’ve searched around but didn’t find anything.  My machine comes tomorrow and I am looking forward to getting it up…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":65,"like_count":0,"has_summary":false,"last_poster_username":"p12nash","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":14629,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Vesa Mount (Gen 2)","id":38089,"title":"Vesa Mount (Gen 2)","slug":"vesa-mount-gen-2","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/e/b/eb58cd32f22af792f25631dff40c277461f6e3d8_2_1024x768.jpeg","created_at":"2026-04-05T20:31:15.195Z","last_posted_at":"2026-04-06T12:32:15.039Z","bumped":true,"bumped_at":"2026-04-06T12:32:15.039Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I couldn’t use the stock HMI arm mounted to the Y rail because my machine’s left side is up against a wall. \nMy solution is this: \n  \nI chose this mounting so if I move the table later, the HMI will go with it. If it sha…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":87,"like_count":12,"has_summary":false,"last_poster_username":"L.M","category_id":191,"op_like_count":7,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2208,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"G2E on folding, mobile base","id":38053,"title":"G2E on folding, mobile base","slug":"g2e-on-folding-mobile-base","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2026-04-01T20:40:15.080Z","last_posted_at":"2026-04-03T14:39:33.381Z","bumped":true,"bumped_at":"2026-04-03T14:39:33.381Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am carefully considering my path forward for updating my OneFinity WW Pro.  My WW Pro is mounted on a QCW with the folding, rolling stand, which I love and want to keep as part of my configuration. \nMy preferred path i…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":85,"like_count":2,"has_summary":false,"last_poster_username":"JimmyBuckets","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":8683,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Which batch number?","id":38060,"title":"Which batch number?","slug":"which-batch-number","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-04-02T20:49:42.884Z","last_posted_at":"2026-04-02T21:16:35.525Z","bumped":true,"bumped_at":"2026-04-02T21:16:35.525Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I was on the website and though I can view my order numbers and a list of items, I can’t seem to find which batch number my order is in.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":52,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14258,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Wiring diagram and links to control my vac (solved, link in comments)","id":38054,"title":"Wiring diagram and links to control my vac (solved, link in comments)","slug":"wiring-diagram-and-links-to-control-my-vac-solved-link-in-comments","posts_count":7,"reply_count":2,"highest_post_number":7,"image_url":null,"created_at":"2026-04-01T21:02:38.697Z","last_posted_at":"2026-04-02T04:52:17.757Z","bumped":true,"bumped_at":"2026-04-02T04:52:17.757Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"It is disappointing to say the least, that I need to buy yet more gear to control my vac like the Masso did with a simple plug wired and mounted on the controller. I am not an electrician. What do I need to buy to get th…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":82,"like_count":8,"has_summary":false,"last_poster_username":"RJensen","category_id":191,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10490,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"I get alarms when i move the gantry to the back of the machine when jogging it","id":38050,"title":"I get alarms when i move the gantry to the back of the machine when jogging it","slug":"i-get-alarms-when-i-move-the-gantry-to-the-back-of-the-machine-when-jogging-it","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2026-04-01T15:10:25.829Z","last_posted_at":"2026-04-01T18:51:42.450Z","bumped":true,"bumped_at":"2026-04-01T18:51:42.450Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"On medium speed, (the default setting), when I jog the machine all the way to the back it faults both x motors. Why does this happen? is the default speed too fast? please advise. also i was screwing in some t tracks and…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":66,"like_count":4,"has_summary":false,"last_poster_username":"HardtailSr","category_id":191,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8590,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"3D Printed Drag Chain End Link (Elite Gen 2)","id":38046,"title":"3D Printed Drag Chain End Link (Elite Gen 2)","slug":"3d-printed-drag-chain-end-link-elite-gen-2","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/d/d/dd5c57590de8688812a0635c54cadaec4c7df3ad.jpeg","created_at":"2026-04-01T12:58:48.150Z","last_posted_at":"2026-04-01T12:58:48.275Z","bumped":true,"bumped_at":"2026-04-01T12:58:48.275Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Just finishing up my Elite Gen 2 Foreman build and ran into a small snag! \n\n  \n \n \n \n\none of my drag chain end links arrived broken. \nI have to give a huge shout-out to the Onefinity Support team; they actually answered …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":64,"like_count":5,"has_summary":false,"last_poster_username":"ERBIUM-68","category_id":191,"op_like_count":5,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":13582,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"G2E Series Maintenance","id":38045,"title":"G2E Series Maintenance","slug":"g2e-series-maintenance","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-01T12:51:46.666Z","last_posted_at":"2026-04-01T12:51:46.798Z","bumped":true,"bumped_at":"2026-04-01T12:51:46.798Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Got everything built and it is looking good! \nI’m moving into the final calibration phase on my Elite Gen 2 Foreman (Redline HDI / 2.2kW Spindle) and I am wondering if anyone has posted a dedicated maintenance video for …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":46,"like_count":0,"has_summary":false,"last_poster_username":"ERBIUM-68","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":13582,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"VFD Mount for Folding QCW","id":36876,"title":"VFD Mount for Folding QCW","slug":"vfd-mount-for-folding-qcw","posts_count":14,"reply_count":9,"highest_post_number":14,"image_url":null,"created_at":"2025-12-16T16:27:08.346Z","last_posted_at":"2026-03-31T04:07:50.939Z","bumped":true,"bumped_at":"2026-03-31T04:07:50.939Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Just ordered the Gen 2 woodworker with the folding/rolling QCW stand.  Planning on getting the 80mm spindle after I get comfortable with my new machine. \nMy question is mounting the VFD.  If I go with the under table mou…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":161,"like_count":11,"has_summary":false,"last_poster_username":"ppd417","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1416,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6904,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Toolpath warning (cutting out of bounds)","id":38019,"title":"Toolpath warning (cutting out of bounds)","slug":"toolpath-warning-cutting-out-of-bounds","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/9/f/9ff62f99f30996496a1ac74a863f54b1f5db640a_2_768x1024.jpeg","created_at":"2026-03-29T23:28:00.124Z","last_posted_at":"2026-03-30T23:55:11.402Z","bumped":true,"bumped_at":"2026-03-30T23:55:11.402Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I keep getting this toolpath warning. Says I’m trying to cut outside the Z limits. I can’t figure out what I’m doing wrong. Very frustrating weekend. Can anyone help?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":118,"like_count":7,"has_summary":false,"last_poster_username":"JimmyBuckets","category_id":191,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14050,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5697,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3247,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline HMI fuse type/size (FAQ)","id":38030,"title":"Redline HMI fuse type/size (FAQ)","slug":"redline-hmi-fuse-type-size-faq","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/8/d/8dd070e0d2d92b144e860d06862e117eacb1726e_2_768x1024.jpeg","created_at":"2026-03-30T20:23:56.091Z","last_posted_at":"2026-03-30T20:23:56.212Z","bumped":true,"bumped_at":"2026-03-30T20:23:56.212Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The Redline HMI has a replaceable fuse on the backside. \n  \n\nFuses for Redline HMI 110V (North America) : \n\n\n6.3A slow 5mm X 20mm\n\n\nDigikey: https://www.digikey.ca/en/products/detail/bel-fuse-inc/5ht-6-3-r/1008987 \nAmazo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":47,"like_count":3,"has_summary":false,"last_poster_username":"Redlinecnc","category_id":194,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":12179,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Gen 2 with QCW HD Stand Motion Controller Location?","id":38020,"title":"Gen 2 with QCW HD Stand Motion Controller Location?","slug":"gen-2-with-qcw-hd-stand-motion-controller-location","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2026-03-30T01:43:38.971Z","last_posted_at":"2026-03-30T17:40:22.744Z","bumped":true,"bumped_at":"2026-03-30T17:40:22.744Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Where are all of you Gen 2’s putting your motion controller?   I am still assembling, just got everything cabled… looking to place the motion controller.  I suspect I will have to figure out something for the spindle con…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":64,"like_count":5,"has_summary":false,"last_poster_username":"JGillHome","category_id":191,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":13012,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Date for release of 1.4.18?","id":38023,"title":"Date for release of 1.4.18?","slug":"date-for-release-of-1-4-18","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":null,"created_at":"2026-03-30T14:06:37.077Z","last_posted_at":"2026-03-30T15:29:16.346Z","bumped":true,"bumped_at":"2026-03-30T15:29:16.346Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"is there a date for the release of 1.4.18 yet? it seems to have many fixes I’d like to have.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":66,"like_count":4,"has_summary":false,"last_poster_username":"HardtailSr","category_id":191,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"I got the notice (Machine on it’s way)","id":37435,"title":"I got the notice (Machine on it's way)","slug":"i-got-the-notice-machine-on-its-way","posts_count":72,"reply_count":54,"highest_post_number":72,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/2/8/28b9d6d44fefd9dee2a6172deeba4473b1e24bbd_2_1024x771.jpeg","created_at":"2026-02-10T18:55:16.387Z","last_posted_at":"2026-03-29T23:27:33.106Z","bumped":true,"bumped_at":"2026-03-29T23:27:33.106Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I can hardly believe it but i just got my notice that my new gen 2 machine is on it’s way. \nWOW that is two weeks earlier than I had thought. Looks like I better get cracking on that table. ok been cracking . still more …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"tags_descriptions":{},"views":816,"like_count":102,"has_summary":true,"last_poster_username":"JimmyBuckets","category_id":191,"op_like_count":6,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2485,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14255,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]}]}}