# Hardware

**URL:** https://forum.onefinitycnc.com/c/faq/hardware/48.md

[Latest](https://forum.onefinitycnc.com/latest.md) · [Categories](https://forum.onefinitycnc.com/categories.md)

---

## [About the Hardware category](https://forum.onefinitycnc.com/t/about-the-hardware-category/10834)

<div class="topic-metadata">

**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Replies:** 0

</div>

---

## [Common Bolt / Screw Types on the Onefinity](https://forum.onefinitycnc.com/t/common-bolt-screw-types-on-the-onefinity/3057)

<div class="topic-metadata">

**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Replies:** 0\
**Last updated:** [January 25, 2021, 11:47pm UTC](https://forum.onefinitycnc.com/t/common-bolt-screw-types-on-the-onefinity/3057 "2021-01-25T23:47:41Z")

</div>

Most bolts can be purchased directly from Fastenal. X Rail 8 Bolts holding down the X Rail to Y gantry blocks : m6 x 22mm long Y Rail to QCW 16 bolts holding the Y feet to the QCW blocks: m6 x 22mm long Stiffy 2 M5…