# Over / Under / Soft Alarm/Toolpath Exceeded

**URL:** https://forum.onefinitycnc.com/c/faq/over-under/60.md

[Latest](https://forum.onefinitycnc.com/latest.md) · [Categories](https://forum.onefinitycnc.com/categories.md)

---

## [Toolpath Warning: Over/Under (BB Buildbotics), Soft Alarm (Masso), Or Toolpath Warning Exceeded (RealTime/Redline)](https://forum.onefinitycnc.com/t/toolpath-warning-over-under-bb-buildbotics-soft-alarm-masso-or-toolpath-warning-exceeded-realtime-redline/1982)

<div class="topic-metadata">

**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Replies:** 0\
**Last updated:** [December 8, 2020, 1:46am UTC](https://forum.onefinitycnc.com/t/toolpath-warning-over-under-bb-buildbotics-soft-alarm-masso-or-toolpath-warning-exceeded-realtime-redline/1982 "2020-12-08T01:46:27Z")

</div>

While this FAQ was originally wrote for the Non-Elite Machines, the same principal applies to both. Over/under on non-elite controllers and soft alarm on elite controllers mean the same thing, so the below principals ap…