# WIFI/Network

**URL:** https://forum.onefinitycnc.com/c/faq/wifi-network/56.md

[Latest](https://forum.onefinitycnc.com/latest.md) · [Categories](https://forum.onefinitycnc.com/categories.md)

---

## [About the WIFI/Network category](https://forum.onefinitycnc.com/t/about-the-wifi-network-category/10842)

<div class="topic-metadata">

**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Replies:** 0

</div>

---

## [(Optional) Connected to internet but things aren't working right fix](https://forum.onefinitycnc.com/t/optional-connected-to-internet-but-things-arent-working-right-fix/15285)

<div class="topic-metadata">

**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Replies:** 1\
**Last updated:** [August 15, 2024, 5:34pm UTC](https://forum.onefinitycnc.com/t/optional-connected-to-internet-but-things-arent-working-right-fix/15285 "2024-08-15T17:34:39Z")

</div>

Have your controller connected to the internet but things aren’t working quite right? Do the following in order: turning off the controller. unplugging power to extender. Unplugging power to the router. wait…

---

## [Is internet/wifi Required to use the Onefinity?](https://forum.onefinitycnc.com/t/is-internet-wifi-required-to-use-the-onefinity/1265)

<div class="topic-metadata">

**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Replies:** 0\
**Last updated:** [October 14, 2020, 12:18pm UTC](https://forum.onefinitycnc.com/t/is-internet-wifi-required-to-use-the-onefinity/1265 "2020-10-14T12:18:26Z")

</div>

Some info concerning wifi/internet and the Onefinity CNC. The Onefinity 100% does NOT require wifi or internet. You will NEVER need to hook it up to the internet. Doing so is completely optional. There are three main r…

---

## [Setting up a static IP address](https://forum.onefinitycnc.com/t/setting-up-a-static-ip-address/1357)

<div class="topic-metadata">

**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Replies:** 10\
**Last updated:** [October 4, 2021, 4:49pm UTC](https://forum.onefinitycnc.com/t/setting-up-a-static-ip-address/1357 "2021-10-04T16:49:46Z")

</div>

If your router is assigning a new IP address to your controller upon reboot, setting up a static IP address would be beneficial. We will need to do this at the Wi-Fi router level, as you cannot access or change this inf…