{"users":[{"id":1,"username":"OnefinityCNC","name":"Onefinity CNC Official ✅","avatar_template":"/user_avatar/forum.onefinitycnc.com/onefinitycnc/{size}/7_2.png","admin":true,"trust_level":4},{"id":2820,"username":"RexH","name":"Rex A Hanson","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/r/c37758/{size}.png","trust_level":2},{"id":8217,"username":"Shwerk","name":"Josh Workman","avatar_template":"/user_avatar/forum.onefinitycnc.com/shwerk/{size}/27160_2.png","trust_level":1},{"id":5262,"username":"BuckeyeDennis","name":"Dennis Pugh","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/4491bb/{size}.png","trust_level":2},{"id":14546,"username":"precisiongoodsco","name":"Steven","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/ee59a6/{size}.png","trust_level":1},{"id":10465,"username":"Calvin","name":"Calvin","avatar_template":"/user_avatar/forum.onefinitycnc.com/calvin/{size}/32664_2.png","trust_level":2},{"id":476,"username":"gad5264","name":"Grant Davis","avatar_template":"/user_avatar/forum.onefinitycnc.com/gad5264/{size}/701_2.png","trust_level":2},{"id":372,"username":"Machinist","name":"Bill Blades","avatar_template":"/user_avatar/forum.onefinitycnc.com/machinist/{size}/25961_2.png","trust_level":2},{"id":3591,"username":"MiBer5","name":"Mike","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/c67d28/{size}.png","trust_level":2},{"id":631,"username":"pwpacp","name":"Phil","avatar_template":"/user_avatar/forum.onefinitycnc.com/pwpacp/{size}/1718_2.png","trust_level":3},{"id":10710,"username":"MikeXYZ","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/mikexyz/{size}/32034_2.png","trust_level":3},{"id":816,"username":"Bear","name":"Gerry","avatar_template":"/user_avatar/forum.onefinitycnc.com/bear/{size}/30015_2.png","trust_level":0},{"id":14108,"username":"Dkline","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/dbc845/{size}.png","trust_level":1},{"id":2927,"username":"mchoonmaker","name":"Mike Schoonmaker","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/4491bb/{size}.png","trust_level":2},{"id":1402,"username":"Morelli","name":"Joe","avatar_template":"/user_avatar/forum.onefinitycnc.com/morelli/{size}/23072_2.png","trust_level":0},{"id":5883,"username":"RockingMallet","name":"Joshua","avatar_template":"/user_avatar/forum.onefinitycnc.com/rockingmallet/{size}/22313_2.png","trust_level":2},{"id":2208,"username":"dsunds","name":"David","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/50afbb/{size}.png","trust_level":2},{"id":9194,"username":"PFC","name":"Peter Conway","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/50afbb/{size}.png","trust_level":1},{"id":4655,"username":"HardtailSr","name":"robert mainville","avatar_template":"/user_avatar/forum.onefinitycnc.com/hardtailsr/{size}/35326_2.png","trust_level":3},{"id":13399,"username":"L.M","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/l/a87d85/{size}.png","trust_level":3},{"id":13598,"username":"JimmyBuckets","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/{size}.png","trust_level":3},{"id":8534,"username":"Ken5","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/f0a364/{size}.png","trust_level":3},{"id":2523,"username":"bwcherry","name":"Bill C","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/f04885/{size}.png","trust_level":2},{"id":91,"username":"Woodtick","name":"Rich Stephens","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/e99b99/{size}.png","trust_level":2},{"id":1553,"username":"rriker","name":"Rob Riker","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/r/e5b9ba/{size}.png","trust_level":2},{"id":6060,"username":"PezWoodworks","name":"Pat","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/{size}.png","trust_level":1},{"id":4690,"username":"DizzyG","name":"Eric","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/a87d85/{size}.png","trust_level":2},{"id":3135,"username":"tpeachey","name":"Tim Peachey","avatar_template":"/user_avatar/forum.onefinitycnc.com/tpeachey/{size}/5426_2.png","trust_level":2},{"id":2120,"username":"SailorMike","name":"Michael Bruck","avatar_template":"/user_avatar/forum.onefinitycnc.com/sailormike/{size}/3290_2.png","trust_level":2},{"id":3575,"username":"GrimResistance","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/grimresistance/{size}/7198_2.png","trust_level":2},{"id":11424,"username":"bieber","name":"Robert Bieber","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/71e660/{size}.png","trust_level":1},{"id":1171,"username":"Donkel","name":"Don K","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/3e96dc/{size}.png","trust_level":2},{"id":4081,"username":"Atroz","name":"Atroz","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/a/958977/{size}.png","trust_level":2},{"id":7541,"username":"RyMoe","name":"RyMoe","avatar_template":"/user_avatar/forum.onefinitycnc.com/rymoe/{size}/25064_2.png","trust_level":2},{"id":12464,"username":"Macswoods","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/ad7895/{size}.png","trust_level":2},{"id":3163,"username":"Woodhead","name":"Frank","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/71c47a/{size}.png","trust_level":2},{"id":8687,"username":"philmallette","name":"Phil a need","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/34f0e0/{size}.png","trust_level":1},{"id":6320,"username":"ynot","name":"Tony Aldridge","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/y/a698b9/{size}.png","trust_level":0},{"id":2121,"username":"quesohusker","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/quesohusker/{size}/28134_2.png","trust_level":2},{"id":688,"username":"TMToronto","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/7ea924/{size}.png","trust_level":3},{"id":1565,"username":"alldaysammyj","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/a/ac8455/{size}.png","trust_level":2},{"id":2013,"username":"Cryptonym","name":"Warren Brown","avatar_template":"/user_avatar/forum.onefinitycnc.com/cryptonym/{size}/2886_2.png","trust_level":2},{"id":4770,"username":"giome","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/giome/{size}/9914_2.png","trust_level":2},{"id":2243,"username":"Alphonse","name":"Alan ","avatar_template":"/user_avatar/forum.onefinitycnc.com/alphonse/{size}/3408_2.png","trust_level":2},{"id":4450,"username":"mtannerdesigns","name":"Matt","avatar_template":"/user_avatar/forum.onefinitycnc.com/mtannerdesigns/{size}/9309_2.png","trust_level":2},{"id":3738,"username":"Echd","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/e/779978/{size}.png","trust_level":2},{"id":3291,"username":"Yucon","name":"Ron Stadler","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/y/a698b9/{size}.png","trust_level":1},{"id":126,"username":"MindOfMcClure","name":"Alex McClure (Community Admin)","avatar_template":"/user_avatar/forum.onefinitycnc.com/mindofmcclure/{size}/38_2.png","moderator":true,"trust_level":2},{"id":8108,"username":"KevTN","name":"Kevin","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/fbc32d/{size}.png","trust_level":2},{"id":4680,"username":"bitrunner","name":"JG","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/ac91a4/{size}.png","trust_level":2},{"id":4762,"username":"Off-kilter","name":"Charles Anderson","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/o/a9adbd/{size}.png","trust_level":2},{"id":7274,"username":"Tomdigi","name":"Thomas Hugo DiGiovanni","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/b9e5f3/{size}.png","trust_level":2},{"id":4631,"username":"Pony","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/4da419/{size}.png","trust_level":2},{"id":796,"username":"AndyP","name":"Badger","avatar_template":"/user_avatar/forum.onefinitycnc.com/andyp/{size}/1106_2.png","trust_level":2},{"id":1635,"username":"349iq2345","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/{size}.png","trust_level":0},{"id":3494,"username":"LeftHandedElephant","name":"Tim","avatar_template":"/user_avatar/forum.onefinitycnc.com/lefthandedelephant/{size}/6383_2.png","trust_level":2},{"id":8908,"username":"Canvastree","name":"Rusty","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/c5a1d2/{size}.png","trust_level":1},{"id":58,"username":"GeraldSmith","name":"Gerald","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/g/e79b87/{size}.png","trust_level":2},{"id":7493,"username":"PJme47","name":"Pjme47","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/848f3c/{size}.png","trust_level":2},{"id":4985,"username":"jfleser","name":"Jim Fleser","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/ac8455/{size}.png","trust_level":2},{"id":9318,"username":"cphippen","name":"Chris","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/f17d59/{size}.png","trust_level":2},{"id":8804,"username":"BKurk","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/bkurk/{size}/28084_2.png","trust_level":2},{"id":3583,"username":"KenA","name":"Ken","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/e9bcb4/{size}.png","trust_level":2},{"id":10255,"username":"TheNewJankyWorkshop","name":"Geoff @ The New Janky Workshop","avatar_template":"/user_avatar/forum.onefinitycnc.com/thenewjankyworkshop/{size}/31736_2.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/gallery/20?page=1","per_page":30,"topics":[{"fancy_title":"About the Gallery category","id":29,"title":"About the Gallery category","slug":"about-the-gallery-category","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2020-06-24T00:59:57.646Z","last_posted_at":"2024-05-15T03:05:58.905Z","bumped":true,"bumped_at":"2024-05-15T03:05:58.905Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"A place to share and discuss projects. You make awesome stuff and we all want to see it!","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1234,"like_count":0,"has_summary":false,"last_poster_username":"RexH","category_id":20,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2820,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"June 2026 Shop Update","id":38919,"title":"June 2026 Shop Update","slug":"june-2026-shop-update","posts_count":17,"reply_count":13,"highest_post_number":17,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/a/2/a265509dbc19302f2e630156cd6f3f3b5f3c64b2_2_1024x1024.jpeg","created_at":"2026-06-08T07:38:58.353Z","last_posted_at":"2026-06-14T23:36:46.648Z","bumped":true,"bumped_at":"2026-06-14T23:36:46.648Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Howdy.\nLong time no see. My new job has kept me far too busy. \nBut recently I spent a bit of time in my shop, and made some upgrades to my setup that have me feeling all warm and fuzzy. Basically a “Felt pretty, might de…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":269,"like_count":20,"has_summary":false,"last_poster_username":"Calvin","category_id":33,"op_like_count":6,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":8217,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5262,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14546,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10465,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Post up them projects (:eyes: Show off what you’ve made on your Onefinity!)","id":1345,"title":"Post up them projects (👀 Show off what you've made on your Onefinity!)","slug":"post-up-them-projects-show-off-what-youve-made-on-your-onefinity","posts_count":1810,"reply_count":1170,"highest_post_number":1878,"image_url":null,"created_at":"2020-10-19T19:05:21.454Z","last_posted_at":"2026-06-14T16:50:17.974Z","bumped":true,"bumped_at":"2026-06-14T16:50:17.974Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Come on people, I know some of you have had your machines for a while. Post up some projects already for some inspiration for the rest of us that are still waiting.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":138688,"like_count":7391,"has_summary":true,"last_poster_username":"MikeXYZ","category_id":32,"op_like_count":7,"pinned_globally":true,"featured_link":null,"is_hot":true,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":476,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":372,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3591,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":631,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10710,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Admire the player","id":38849,"title":"Admire the player","slug":"admire-the-player","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/2/f/2fc79d4145137fdebb399d5d34d79f491395cefe_2_768x1024.jpeg","created_at":"2026-05-31T17:23:06.162Z","last_posted_at":"2026-05-31T17:23:06.258Z","bumped":true,"bumped_at":"2026-05-31T17:23:06.258Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Sometimes you just have to admire the player that put on a great game! \nI had a solid week of dong one job after another. And then there’s always that last minute job that just has to be done when the truck is already lo…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":75,"like_count":5,"has_summary":false,"last_poster_username":"Bear","category_id":20,"op_like_count":5,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":816,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"My first 3d carve","id":38830,"title":"My first 3d carve","slug":"my-first-3d-carve","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/9/b/9b10fc59ab1569afb6d7251c52001eb7eb85abbd_2_771x1024.jpeg","created_at":"2026-05-28T22:19:15.560Z","last_posted_at":"2026-05-28T22:19:15.664Z","bumped":true,"bumped_at":"2026-05-28T22:19:15.664Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Great and fun CNC can’t wait to get more projects going. Ran the 3d carve and followed it up with a low power laser burn.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":103,"like_count":5,"has_summary":false,"last_poster_username":"Dkline","category_id":20,"op_like_count":5,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":14108,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Show us your vertical clamping methods!","id":9035,"title":"Show us your vertical clamping methods!","slug":"show-us-your-vertical-clamping-methods","posts_count":78,"reply_count":59,"highest_post_number":79,"image_url":null,"created_at":"2021-11-20T13:56:20.919Z","last_posted_at":"2026-05-28T02:21:41.419Z","bumped":true,"bumped_at":"2026-05-28T02:21:41.419Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"There seems to be plenty of interest in vertical clamping of stock for end grain joinery. \nCertainly, the brain trust of this forum has a lot of creativity - please post pics of YOUR table mods for the vertical clamping …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":13021,"like_count":181,"has_summary":true,"last_poster_username":"dsunds","category_id":33,"op_like_count":5,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2927,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1402,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10465,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5883,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2208,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"1Finity Journeyman HD leg upgrade & cabinet","id":38788,"title":"1Finity Journeyman HD leg upgrade & cabinet","slug":"1finity-journeyman-hd-leg-upgrade-cabinet","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/1/2/1250036174017e3837993c1cedd390ae613a7d92_2_1024x768.jpeg","created_at":"2026-05-23T01:28:16.857Z","last_posted_at":"2026-05-23T12:25:35.511Z","bumped":true,"bumped_at":"2026-05-23T12:25:35.511Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"After installing the leg upgrade kit I used my Journeyman to make the under-mount cabinet shown here.  With custom drawer inserts, it keeps my most frequently used accessories and bits immediately accessible. I used Sali…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":91,"like_count":9,"has_summary":false,"last_poster_username":"HardtailSr","category_id":32,"op_like_count":7,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":9194,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Damage during shipment","id":37994,"title":"Damage during shipment","slug":"damage-during-shipment","posts_count":12,"reply_count":6,"highest_post_number":12,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/8/9/89b953045b3d03e09234a2f965a76950454203a0_2_768x1024.jpeg","created_at":"2026-03-27T15:25:25.307Z","last_posted_at":"2026-04-17T18:47:08.501Z","bumped":true,"bumped_at":"2026-04-17T18:47:08.501Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Some folks have posted shipping damage to their boxes in another thread, so I thought I’d start a thread for everyone to share any damage prior to opening their boxes. \nThis was the shape today’s shipment came in (4th ax…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":240,"like_count":17,"has_summary":false,"last_poster_username":"Ken5","category_id":20,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":631,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lazy Susan’s from Scraps","id":30952,"title":"Lazy Susan's from Scraps","slug":"lazy-susans-from-scraps","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/3/f/3fc75e7d967a0095d5dc4352734f19e462a0f53e_2_768x1024.jpeg","created_at":"2025-02-16T02:29:05.095Z","last_posted_at":"2026-04-06T02:07:36.547Z","bumped":true,"bumped_at":"2026-04-06T02:07:36.547Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I had a bunch of scraps lying around that I didn’t want to burn so I ended up gluing them together and making some lazy susan’s. The diameters are just under 15". After gluing them up they were not perfectly flat and the…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":410,"like_count":11,"has_summary":false,"last_poster_username":"RexH","category_id":32,"op_like_count":10,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2820,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2523,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Sculptured Serving Trays","id":30950,"title":"Sculptured Serving Trays","slug":"sculptured-serving-trays","posts_count":3,"reply_count":1,"highest_post_number":3,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/0/0/00112c73ecd93ad9de2541de5f318aba10d34088_2_768x1024.jpeg","created_at":"2025-02-16T02:17:55.682Z","last_posted_at":"2026-04-06T02:06:19.153Z","bumped":true,"bumped_at":"2026-04-06T02:06:19.153Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Made a few sculptured serving trays. Top surface is concave in both X&Y directions. Bottom matches the top curvature with some feet added. Size is approximately 8" x 22" x 1". Two sided job took about four hours. \nMateri…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":317,"like_count":6,"has_summary":false,"last_poster_username":"RexH","category_id":32,"op_like_count":5,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2820,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Mini Table Saw Sled","id":37988,"title":"Mini Table Saw Sled","slug":"mini-table-saw-sled","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/4/0/40b4914b31c408181f56ae2cb8d85ebbc09a1d0b_2_1024x768.jpeg","created_at":"2026-03-26T22:21:55.814Z","last_posted_at":"2026-03-27T13:17:56.286Z","bumped":true,"bumped_at":"2026-03-27T13:17:56.286Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"It’s not artistic, but Very functional and very accurate. I used my CNC to make a mini sled for my table saw. I started by cutting a 1/16" deep dado in the bottom for the guide bar making it just wide enough for a snug f…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":168,"like_count":10,"has_summary":false,"last_poster_username":"Woodtick","category_id":32,"op_like_count":10,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2820,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":91,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Football Serving Tray","id":37989,"title":"Football Serving Tray","slug":"football-serving-tray","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/6/7/67c6529ebbd521698701a7c2db54e13142be37fa_2_1024x768.jpeg","created_at":"2026-03-26T22:31:06.316Z","last_posted_at":"2026-03-27T12:41:30.418Z","bumped":true,"bumped_at":"2026-03-27T12:41:30.418Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"A few years ago a friend gave me some walnut logs that the mill didn’t take when they harvested the trees from his farm. After slabbing them and letting them air dry I made him this football serving tray with a maple inl…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":106,"like_count":7,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":7,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2820,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"First furniture project - walnut night stand","id":29024,"title":"First furniture project - walnut night stand","slug":"first-furniture-project-walnut-night-stand","posts_count":12,"reply_count":3,"highest_post_number":12,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/d/5/d50003aa4cf47e6401f74aec50f45fcb8e337425_2_771x1024.jpeg","created_at":"2024-10-20T04:51:25.567Z","last_posted_at":"2026-03-13T15:49:49.189Z","bumped":true,"bumped_at":"2026-03-13T15:49:49.189Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Took me an embarrassingly long time to finish! But it came out more or less how it was supposed to. Some novel joinery in there (mostly because I don’t know any better). Pretty much just table saw & 1F, so had to do all …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":735,"like_count":35,"has_summary":false,"last_poster_username":"rriker","category_id":32,"op_like_count":16,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":1553,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6060,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4690,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3135,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"A Six-Sided Box","id":29497,"title":"A Six-Sided Box","slug":"a-six-sided-box","posts_count":5,"reply_count":1,"highest_post_number":5,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/5/b578f6901d5919f5a92b349a4e5f31f307180b87.jpeg","created_at":"2024-11-22T22:12:33.383Z","last_posted_at":"2026-03-13T00:55:49.764Z","bumped":true,"bumped_at":"2026-03-13T00:55:49.764Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve just finished an arcade game that I designed. It uses an Arduino Nano, and it works like the “Simon” toy of old, where the player echoes as many lights/sounds as possible. \nBecause there are six switches on the pane…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":406,"like_count":8,"has_summary":false,"last_poster_username":"SailorMike","category_id":32,"op_like_count":4,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":5262,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3575,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Machined a square for X/Y alignment","id":34167,"title":"Machined a square for X/Y alignment","slug":"machined-a-square-for-x-y-alignment","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/2/b/2b79a4790e553b5bd2a8aa8c40be4e4e4b9145dc_2_1024x771.jpeg","created_at":"2025-06-26T17:55:11.965Z","last_posted_at":"2026-03-13T00:07:18.975Z","bumped":true,"bumped_at":"2026-03-13T00:07:18.975Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"This is my somewhat silly solution for getting work pieces lined up on the X/Y axes.  The obvious solution is to use holes for locating pins but I’m a little bit precious about my spoil board and didn’t want to start dri…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":244,"like_count":7,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":33,"op_like_count":7,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":11424,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Under Workbench Enclosure: Woodworker X-50","id":14299,"title":"Under Workbench Enclosure: Woodworker X-50","slug":"under-workbench-enclosure-woodworker-x-50","posts_count":7,"reply_count":3,"highest_post_number":7,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/2X/d/d6b7b07d803ebd86537362480197e32d292ffdf0_2_768x1024.jpeg","created_at":"2022-07-25T16:46:48.608Z","last_posted_at":"2026-03-13T00:06:59.444Z","bumped":true,"bumped_at":"2026-03-13T00:06:59.444Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My workshop/garage space is limited, and I didn’t want to lose my workbench to the CNC. I expanded the size and made an enclosure below it to contain everything I need. Still need to work on my wire management, but I’ve …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1213,"like_count":8,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":33,"op_like_count":4,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1171,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4081,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7541,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":12464,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Hoisting my onefinity jourenyman elite to the ceiling when not in use","id":24670,"title":"Hoisting my onefinity jourenyman elite to the ceiling when not in use","slug":"hoisting-my-onefinity-jourenyman-elite-to-the-ceiling-when-not-in-use","posts_count":33,"reply_count":24,"highest_post_number":37,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/f/9f35e4fcbc6627154137e4e4c991ffa13bf10aba.jpeg","created_at":"2024-01-13T02:04:19.373Z","last_posted_at":"2026-03-13T00:06:23.528Z","bumped":true,"bumped_at":"2026-03-13T00:06:23.528Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello to all fellow woodworkers/CNC enthusiasts! This is my first post, but, I have benefited hugely from a lot of the experience here. So, I’m hoping someone can help. \nMy shop is a double car garage with a bedroom o…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1898,"like_count":33,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":33,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3163,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Accepted Answer","user_id":8687,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6320,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2121,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Masso G3 based build F360 pics and 1F photos","id":7107,"title":"Masso G3 based build F360 pics and 1F photos","slug":"masso-g3-based-build-f360-pics-and-1f-photos","posts_count":39,"reply_count":31,"highest_post_number":39,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/2X/f/f48f90ab02fc46d0e7b973bc5a458e91a0dc4992_2_1024x726.jpeg","created_at":"2021-08-07T12:43:56.215Z","last_posted_at":"2026-03-13T00:05:55.951Z","bumped":true,"bumped_at":"2026-03-13T00:05:55.951Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have taken a break from building my control enclosure - recently finished building new cables with GX12 connectors for homing sensors - and have moved on to the 1F CNC itself. I purchased 15mmX50mm drag chai…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":4384,"like_count":22,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":33,"op_like_count":5,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1565,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2013,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4770,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Made a wooden geared clock","id":14459,"title":"Made a wooden geared clock","slug":"made-a-wooden-geared-clock","posts_count":23,"reply_count":9,"highest_post_number":23,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/5/0/507d91bf2d6fbf98b9d2aa2a58bbd6d74913739a_2_1024x576.jpeg","created_at":"2022-08-02T16:24:23.811Z","last_posted_at":"2026-03-13T00:04:40.115Z","bumped":true,"bumped_at":"2026-03-13T00:04:40.115Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I made a Magica Clock.  It is a wooden geared clock with all the wooden parts were made on my OF JM X50.  Lots of toolpath work and tool database polishing on this project.  Most of the parts were cut with a 1/16" down c…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":4288,"like_count":41,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":19,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2243,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4450,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3738,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lazy susan kept me busy","id":18323,"title":"Lazy susan kept me busy","slug":"lazy-susan-kept-me-busy","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/5/7/57c43c41f9e748ef7db2530eed74db6b7adbdb60_2_768x1024.jpeg","created_at":"2023-01-23T01:07:18.510Z","last_posted_at":"2026-03-13T00:04:20.307Z","bumped":true,"bumped_at":"2026-03-13T00:04:20.307Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Made this one for a friend, white oak, inlaided mahogany and epoxy ring, fun but did have a few mistakes in my inlay, this being my first inlay I’ve still have a lot to learn.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1256,"like_count":17,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":8,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3291,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":126,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8108,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Mandala Wall Art","id":28417,"title":"Mandala Wall Art","slug":"mandala-wall-art","posts_count":7,"reply_count":1,"highest_post_number":7,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/e/a/ea67b9892991ee586f05858db4e4837dfa3cc5b0_2_1024x1024.jpeg","created_at":"2024-08-28T15:40:40.287Z","last_posted_at":"2026-03-13T00:03:53.045Z","bumped":true,"bumped_at":"2026-03-13T00:03:53.045Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Made a 7-layer mandal style wall hanging. 29.5" in diameter, 1/8" plywood, stained with various strengths of espresso, coffee and India ink.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":601,"like_count":19,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":12,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4680,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":631,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4762,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7274,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Plastic blast gates","id":28532,"title":"Plastic blast gates","slug":"plastic-blast-gates","posts_count":7,"reply_count":1,"highest_post_number":7,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/0/1/0189694f17d62cc7d044e2c15ee7e404f13385b8_2_1024x768.jpeg","created_at":"2024-09-06T19:02:19.338Z","last_posted_at":"2026-03-13T00:03:32.761Z","bumped":true,"bumped_at":"2026-03-13T00:03:32.761Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I was asked to make some blast gates for a friend which were similar to mine but made out of plastic (mine are maple). \nEach one was made out of 1 large polypropylene (PP) cutting board from a big box store. They have a …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":365,"like_count":8,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":5,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4631,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":796,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Carpentopod (inspiration)","id":28722,"title":"Carpentopod (inspiration)","slug":"carpentopod-inspiration","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/b/5/b571dd9469a6ae82a67458d4fbc90c97c73c3c9b_2_1024x576.jpeg","created_at":"2024-09-22T07:52:10.631Z","last_posted_at":"2026-03-13T00:03:01.395Z","bumped":true,"bumped_at":"2026-03-13T00:03:01.395Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey all, \ninspiration for the weekend (found on Duglotz): \n\n  \n    \n  \n\n\n  \n    \n  \n\n\n  \n    \n  \n\n\n  \n    \n  \n\n\n  \n    \n  \n\n\n  \n    \n  \n\n\n– Source: https://decarpentier.nl \nhttps://youtube.com/giliamdecarpentier","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":350,"like_count":9,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":8,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1635,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Computer Desk with touch sensitive epoxy inlay","id":28733,"title":"Computer Desk with touch sensitive epoxy inlay","slug":"computer-desk-with-touch-sensitive-epoxy-inlay","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/0/f/0fed53666d31403876f4ab970f2a121730911f41.jpeg","created_at":"2024-09-22T22:18:53.959Z","last_posted_at":"2026-03-13T00:02:36.116Z","bumped":true,"bumped_at":"2026-03-13T00:02:36.116Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Completed this project a few years ago, it was one of the first major builds I did with my 32x32. I had done several smaller projects before, but saw a similar coffee table on youtube and thought, I could f…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":517,"like_count":10,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":10,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3494,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Live Edge Bowl Carve","id":28862,"title":"Live Edge Bowl Carve","slug":"live-edge-bowl-carve","posts_count":12,"reply_count":5,"highest_post_number":12,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/e/b/ebb9084ff5fa7843d0f5c4a0ac11917aa662d7c0_2_768x1024.jpeg","created_at":"2024-10-04T00:03:05.572Z","last_posted_at":"2026-03-13T00:02:08.748Z","bumped":true,"bumped_at":"2026-03-13T00:02:08.748Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am working on a repeatable process for 2 sided machining. So far so good. Let me know what yall think.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":452,"like_count":16,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":5,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":8908,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":58,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7493,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4985,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Cherry Cipher with Detents","id":29909,"title":"Cherry Cipher with Detents","slug":"cherry-cipher-with-detents","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/a/3/a37f84facf4f0e1a446de41127dc8d474f5c4f37_2_768x1024.jpeg","created_at":"2024-12-11T15:32:40.899Z","last_posted_at":"2026-03-12T23:59:29.488Z","bumped":true,"bumped_at":"2026-03-12T23:59:29.488Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Made a few ciphers out of cherry for my grandsons. \nDetent is 3D printed. Cipher code is randomized. Finished with Danish Oil.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":288,"like_count":2,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2820,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4631,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New Toy for the Tyke","id":28970,"title":"New Toy for the Tyke","slug":"new-toy-for-the-tyke","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/5/0/504d7a54f4e50b1495e24b0071732bc52e1470c3.jpeg","created_at":"2024-10-14T19:03:10.525Z","last_posted_at":"2026-03-12T23:47:24.755Z","bumped":true,"bumped_at":"2026-03-12T23:47:24.755Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just finished this toy for the grandchild of a friend. I’ve been doing CNC for a while, but it still amazes me that all the holes in the shapes line up perfectly with the pegs! Using VCarve, I laid the whole thing out …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":392,"like_count":3,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":2,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3575,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Pinball Wizard backlit sign","id":30423,"title":"Pinball Wizard backlit sign","slug":"pinball-wizard-backlit-sign","posts_count":8,"reply_count":3,"highest_post_number":8,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/9/5/951849c349f3f8aae069373b97571ed47bafaae3_2_1024x768.jpeg","created_at":"2025-01-12T14:32:58.649Z","last_posted_at":"2026-03-12T23:45:41.968Z","bumped":true,"bumped_at":"2026-03-12T23:45:41.968Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My boss is a big mechanical pinball guy. His favourite maker is Gottlieb, so I made him a backlit logo sign. Coloured epoxy (4 pours), walnut case, led tape lights.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":427,"like_count":11,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":6,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":9318,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8804,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3583,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Rustic Clocks from Cherry Scraps","id":30951,"title":"Rustic Clocks from Cherry Scraps","slug":"rustic-clocks-from-cherry-scraps","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/a/8/a8f460c3a2d75f2661d3ec7f9f4ae44038b4d5db_2_768x1024.jpeg","created_at":"2025-02-16T02:23:43.519Z","last_posted_at":"2026-03-12T23:44:48.265Z","bumped":true,"bumped_at":"2026-03-12T23:44:48.265Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I had some cherry with large voids I had to cut around for a project. I was originally planning to toss the waste but the grain was so pretty I couldn’t imagine burning it. So I ended up making a couple of tower clocks. …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":327,"like_count":6,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":5,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2820,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10255,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Live Edge Walnut Clock","id":33096,"title":"Live Edge Walnut Clock","slug":"live-edge-walnut-clock","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/3/c/3c0f072057b352f592d418113bf4cd3af65cfde8_2_768x1024.jpeg","created_at":"2025-05-10T19:51:47.912Z","last_posted_at":"2026-03-12T23:43:25.636Z","bumped":true,"bumped_at":"2026-03-12T23:43:25.636Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I had some more walnut scraps lying around so I decided to make another live edge clock. \nUsing a 1/4" ball nose bit to cut the hour marks didn’t work too well with the Oramask. It left \na loft of chewed up Oramask mater…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":246,"like_count":4,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":32,"op_like_count":4,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2820,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]}]}}