# Controller (Redline) Discussion **URL:** https://forum.onefinitycnc.com/c/machines-elite-series-masso/controller-redline-discussion/180.md [Latest](https://forum.onefinitycnc.com/latest.md) · [Categories](https://forum.onefinitycnc.com/categories.md) --- ## [About the Controller (Redline) Discussion category](https://forum.onefinitycnc.com/t/about-the-controller-redline-discussion-category/34655)
**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Replies:** 0
--- ## [Want ot control Vacuums, Pumps and other things with your RedLine?](https://forum.onefinitycnc.com/t/want-ot-control-vacuums-pumps-and-other-things-with-your-redline/38052)
**Author:** [@tjp52](https://forum.onefinitycnc.com/u/tjp52)\ **Replies:** 33\ **Last updated:** [September 26, 2026, 10:59pm UTC](https://forum.onefinitycnc.com/t/want-ot-control-vacuums-pumps-and-other-things-with-your-redline/38052 "2026-09-26T22:59:31Z")
Here’s a project a few of you may be interested in for controlling your shop vacs, pumps and other things from your RedLine controller. It basically accepts the low current outputs from the RedLine to drive relays that c… --- ## [Wirelessly Controlling the RTCNC/Redline Software](https://forum.onefinitycnc.com/t/wirelessly-controlling-the-rtcnc-redline-software/37033)
**Author:** [@L.M](https://forum.onefinitycnc.com/u/L.M)\ **Replies:** 10\ **Last updated:** [September 24, 2026, 12:21pm UTC](https://forum.onefinitycnc.com/t/wirelessly-controlling-the-rtcnc-redline-software/37033 "2026-09-24T12:21:32Z")
As RealTime CNC, Redline and Onefinity continue their work on improving the UI/UX and general over all stability of the Redline System I thought I’d play a bit and see what might be possible in the future. WIth that in m… --- ## [Redline Tool List Hard Copy](https://forum.onefinitycnc.com/t/redline-tool-list-hard-copy/40042)
**Author:** [@SailorMike](https://forum.onefinitycnc.com/u/SailorMike)\ **Replies:** 0\ **Last updated:** [August 21, 2026, 9:15pm UTC](https://forum.onefinitycnc.com/t/redline-tool-list-hard-copy/40042 "2026-08-21T21:15:34Z")
Until now, I’ve been frustrated in my attempts to obtain a hard copy of my tool database. I wanted it for ready reference in the shop, and to compare the VCarve tool database to Redline tool list in order to make sure al… --- ## [Toolsetter inaccuracy with Redline](https://forum.onefinitycnc.com/t/toolsetter-inaccuracy-with-redline/39553)
**Author:** [@UltraPeepi](https://forum.onefinitycnc.com/u/UltraPeepi)\ **Replies:** 1\ **Last updated:** [August 18, 2026, 7:29pm UTC](https://forum.onefinitycnc.com/t/toolsetter-inaccuracy-with-redline/39553 "2026-08-18T19:29:57Z")
I have started creating carves with multiple tools, and relying on the Toolsetter. It has been working well, and I hope to install my ATC soon. But I ran into an issue today that concerns me. My carve included a toolpath… --- ## [Subject: Position offset after program execution — isolated to M3 command](https://forum.onefinitycnc.com/t/subject-position-offset-after-program-execution-isolated-to-m3-command/38535)
**Author:** [@HgR](https://forum.onefinitycnc.com/u/HgR)\ **Replies:** 1\ **Last updated:** [April 25, 2026, 11:21pm UTC](https://forum.onefinitycnc.com/t/subject-position-offset-after-program-execution-isolated-to-m3-command/38535 "2026-04-25T23:21:41Z")
Machine: Onefinity Elite Gen 1, Foreman format, Redline controller Spindle: Onefinity Spindle Kit by Redline CNC — 80mm, 1.5kW, air-cooled, 110V, ER11 collet Software: Fusion 360 (free version), RealTimeCNC-RTSX post-pro… --- ## [Redline RTS-2 No COM detected error](https://forum.onefinitycnc.com/t/redline-rts-2-no-com-detected-error/37874)
**Author:** [@jzirker](https://forum.onefinitycnc.com/u/jzirker)\ **Replies:** 4\ **Last updated:** [April 25, 2026, 1:29pm UTC](https://forum.onefinitycnc.com/t/redline-rts-2-no-com-detected-error/37874 "2026-04-25T13:29:13Z")
I received the Spindle Kit and HMI 15” screen, along with the RTS-2 Real-time controller. Cabled it up per instructions. When the system boots, the ‘Power’ LED lights briefly on the RTS-2, then goes out. The HMI goes th… --- ## [Plug Protection for Gen 2?](https://forum.onefinitycnc.com/t/plug-protection-for-gen-2/38207)
**Author:** [@SCSailor](https://forum.onefinitycnc.com/u/SCSailor)\ **Replies:** 1\ **Last updated:** [April 19, 2026, 2:37pm UTC](https://forum.onefinitycnc.com/t/plug-protection-for-gen-2/38207 "2026-04-19T14:37:02Z")
Can anyone point me towards a 3D print file for some cable protection that is compatible with Gen2 machines? I am a bit of a klutz. I am fearful that it is only a matter of time before I do something dumb like drop a pi… --- ## [Machine not stopping for tool changes](https://forum.onefinitycnc.com/t/machine-not-stopping-for-tool-changes/37084)
**Author:** [@kburlz](https://forum.onefinitycnc.com/u/kburlz)\ **Replies:** 7\ **Last updated:** [April 14, 2026, 2:02am UTC](https://forum.onefinitycnc.com/t/machine-not-stopping-for-tool-changes/37084 "2026-04-14T02:02:28Z")
Hi everyone, I want to start by saying I’m brand new to the CNC world, so please forgive my ignorance. I just bought a new Foreman Elite (Redline Bundle), and I’m having an issue where the machine doesn’t stop to promp… --- ## [Can I use a logitech joystick with redline controller?](https://forum.onefinitycnc.com/t/can-i-use-a-logitech-joystick-with-redline-controller/37871)
**Author:** [@Doberman](https://forum.onefinitycnc.com/u/Doberman)\ **Replies:** 2\ **Last updated:** [March 17, 2026, 10:11pm UTC](https://forum.onefinitycnc.com/t/can-i-use-a-logitech-joystick-with-redline-controller/37871 "2026-03-17T22:11:21Z")
Will the new Redline controller work with wired or wireless Logitech joysticks? I do have both, but didn’t want to connect it until I check in the forum. --- ## [How to test the USB ports on the Redline controller to see if they work?](https://forum.onefinitycnc.com/t/how-to-test-the-usb-ports-on-the-redline-controller-to-see-if-they-work/37870)
**Author:** [@Doberman](https://forum.onefinitycnc.com/u/Doberman)\ **Replies:** 0\ **Last updated:** [March 14, 2026, 1:33pm UTC](https://forum.onefinitycnc.com/t/how-to-test-the-usb-ports-on-the-redline-controller-to-see-if-they-work/37870 "2026-03-14T13:33:17Z")
I’m working on setting up the Redline controller and having some strange issues since I got it. Finally, I got the right cable to connect it to the VFD yesterday. After digging through YouTube videos, I found the way to … --- ## [Hardwired network for Redline Controller/HMI?](https://forum.onefinitycnc.com/t/hardwired-network-for-redline-controller-hmi/37842)
**Author:** [@RJensen](https://forum.onefinitycnc.com/u/RJensen)\ **Replies:** 3\ **Last updated:** [March 12, 2026, 11:38pm UTC](https://forum.onefinitycnc.com/t/hardwired-network-for-redline-controller-hmi/37842 "2026-03-12T23:38:15Z")
I am upgrading from BB to Redline. I am using a hardwired network connection to the BB. I only see Wi-Fi support in the Redline manual (either on the unit or with a USB Wi-Fi antenna). Is there a way to use a network ca… --- ## [Question about connecting Redline controller to VFD](https://forum.onefinitycnc.com/t/question-about-connecting-redline-controller-to-vfd/37806)
**Author:** [@Doberman](https://forum.onefinitycnc.com/u/Doberman)\ **Replies:** 12\ **Last updated:** [March 9, 2026, 5:10pm UTC](https://forum.onefinitycnc.com/t/question-about-connecting-redline-controller-to-vfd/37806 "2026-03-09T17:10:56Z")
Hi all. Need some help. Not too experienced with the setup. I just received my redline controller to upgrade my Masso to Redline. Trying to connect the Redline Controller to the Onefinity - Air Cooled, 2.2Kw (80mm DIA) P… --- ## [Redline controller failed to home on startup](https://forum.onefinitycnc.com/t/redline-controller-failed-to-home-on-startup/35954)
**Author:** [@tgunr](https://forum.onefinitycnc.com/u/tgunr)\ **Replies:** 4\ **Last updated:** [February 5, 2026, 10:29am UTC](https://forum.onefinitycnc.com/t/redline-controller-failed-to-home-on-startup/35954 "2026-02-05T10:29:41Z")
Upon first power up I hit the Home All button and the display showed it queued the axises but nothing moved. Had to select reboot and then it would home correctly. Sent a video to support and documenting here in case som… --- ## [Redline HMI and Joypad Dongle](https://forum.onefinitycnc.com/t/redline-hmi-and-joypad-dongle/37283)
**Author:** [@L.M](https://forum.onefinitycnc.com/u/L.M)\ **Replies:** 2\ **Last updated:** [January 25, 2026, 9:34pm UTC](https://forum.onefinitycnc.com/t/redline-hmi-and-joypad-dongle/37283 "2026-01-25T21:34:53Z")
If anyone else is using the Redline Controller (HMI) with the wireless joypad, I found that I didn’t like having the wireless USB dongle stick straight out of the side. While it’s true that the DRO for my spindle does th… --- ## [Redline tool changes - not prompted](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211)
**Author:** [@Jpear](https://forum.onefinitycnc.com/u/Jpear)\ **Replies:** 9\ **Last updated:** [January 20, 2026, 3:01am UTC](https://forum.onefinitycnc.com/t/redline-tool-changes-not-prompted/37211 "2026-01-20T03:01:59Z")
Newbie here coming from Shapeoko. I’m having a hard time with bit changes on the redline. When I create a file in Aspire with multiple tools, I’m used to a single file. I did a run today on the redline foreman and the t… --- ## [Running multiple files](https://forum.onefinitycnc.com/t/running-multiple-files/37088)
**Author:** [@Macswoods](https://forum.onefinitycnc.com/u/Macswoods)\ **Replies:** 0\ **Last updated:** [January 5, 2026, 6:51pm UTC](https://forum.onefinitycnc.com/t/running-multiple-files/37088 "2026-01-05T18:51:29Z")
Basic question regarding the Redline controller. Can I load and run multiple files if they use the same tool? Anything special I need to do if it’s possible to do? --- ## [Onefinity Gen 2](https://forum.onefinitycnc.com/t/onefinity-gen-2/37085)
**Author:** [@Pops1](https://forum.onefinitycnc.com/u/Pops1)\ **Replies:** 5\ **Last updated:** [January 5, 2026, 6:21pm UTC](https://forum.onefinitycnc.com/t/onefinity-gen-2/37085 "2026-01-05T18:21:15Z")
I have searched this forum but I have been unable to find the answer to this question. First, let me say I do not own a CNC machine, yet. I have order a Onefinity Gen 2 Foreman. It is suppose to be sometime February. I… --- ## [Solo Changer - Redline](https://forum.onefinitycnc.com/t/solo-changer-redline/37066)
**Author:** [@Macswoods](https://forum.onefinitycnc.com/u/Macswoods)\ **Replies:** 3\ **Last updated:** [January 3, 2026, 2:50am UTC](https://forum.onefinitycnc.com/t/solo-changer-redline/37066 "2026-01-03T02:50:35Z")
Has anyone used one of these with the RedLine Controller? Looks interesting…. --- ## [Saving x,y location](https://forum.onefinitycnc.com/t/saving-x-y-location/36759)
**Author:** [@Neshra](https://forum.onefinitycnc.com/u/Neshra)\ **Replies:** 10\ **Last updated:** [December 3, 2025, 7:56pm UTC](https://forum.onefinitycnc.com/t/saving-x-y-location/36759 "2025-12-03T19:56:01Z")
Is it possible to save a few X and Y locations in the controller for repeat jobs? I saw that there were discussions back in 2020 but didn’t see any final solution from Onefinity. I can save up to 4 locations in Shopsabre… --- ## [Redline Controller Observations/Questions/Bugs](https://forum.onefinitycnc.com/t/redline-controller-observations-questions-bugs/35942)
**Author:** [@BarkingBladeDesignCo](https://forum.onefinitycnc.com/u/BarkingBladeDesignCo)\ **Replies:** 11\ **Last updated:** [November 27, 2025, 6:06pm UTC](https://forum.onefinitycnc.com/t/redline-controller-observations-questions-bugs/35942 "2025-11-27T18:06:44Z")
Some observations and needed walk throughs (for me anyway) for the next firmware release/how to use video/manual: How do I program the macros and use the offsets? (since it appears I cannot program them through a text … --- ## [Rotary with Redline Controller](https://forum.onefinitycnc.com/t/rotary-with-redline-controller/36546)
**Author:** [@Craig](https://forum.onefinitycnc.com/u/Craig)\ **Replies:** 2\ **Last updated:** [November 22, 2025, 7:25pm UTC](https://forum.onefinitycnc.com/t/rotary-with-redline-controller/36546 "2025-11-22T19:25:10Z")
How does the rotary work with the Redline controller vs the Masso? Is it plug-and-play with Redline? I’m not finding any documentation or videos… --- ## [Redline Controller Install walkthrough video](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507)
**Author:** [@jones424](https://forum.onefinitycnc.com/u/jones424)\ **Replies:** 19\ **Last updated:** [November 21, 2025, 4:36pm UTC](https://forum.onefinitycnc.com/t/redline-controller-install-walkthrough-video/35507 "2025-11-21T16:36:27Z")
Here is a quick video installing The New redline Controller onto the Onefinity elite machine. If you have an existing or new machine the install process is the same and pretty quick / straight forward. If you have any … --- ## [What is a 2nm motor upgrade and what is the difference?](https://forum.onefinitycnc.com/t/what-is-a-2nm-motor-upgrade-and-what-is-the-difference/36534)
**Author:** [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\ **Replies:** 3\ **Last updated:** [November 20, 2025, 9:29pm UTC](https://forum.onefinitycnc.com/t/what-is-a-2nm-motor-upgrade-and-what-is-the-difference/36534 "2025-11-20T21:29:09Z")
I have the journeyman elite series with 220 redline spindle stiffy and both the rapidchange ATC and the revoloution 4th axis. what is the motor upgrade about that they are showing with the black friday launch of the redl… --- ## [Redline Home Position](https://forum.onefinitycnc.com/t/redline-home-position/36047)
**Author:** [@Freeman\_woodworking](https://forum.onefinitycnc.com/u/Freeman_woodworking)\ **Replies:** 5\ **Last updated:** [November 5, 2025, 6:40pm UTC](https://forum.onefinitycnc.com/t/redline-home-position/36047 "2025-11-05T18:40:03Z")
Not new to having CNCs in the shop but the Onefinity Redline is new and cant seem to figure out how to do this. So I will be needing a separate home position that ill have a point that the work material will always be at… --- ## [Eazy-Z Toolsetter](https://forum.onefinitycnc.com/t/eazy-z-toolsetter/36085)
**Author:** [@DoorGuy](https://forum.onefinitycnc.com/u/DoorGuy)\ **Replies:** 1\ **Last updated:** [November 4, 2025, 11:52pm UTC](https://forum.onefinitycnc.com/t/eazy-z-toolsetter/36085 "2025-11-04T23:52:22Z")
How do I configure the eazy-z toolsetter on the redline controller? When it is measuring the Z distance on the first step, it pushes down on the button and errors out. --- ## [File Manager Suggestions](https://forum.onefinitycnc.com/t/file-manager-suggestions/35948)
**Author:** [@tgunr](https://forum.onefinitycnc.com/u/tgunr)\ **Replies:** 1\ **Last updated:** [October 24, 2025, 3:40pm UTC](https://forum.onefinitycnc.com/t/file-manager-suggestions/35948 "2025-10-24T15:40:51Z")
Please consider the following improvements to your file manager. Controller Permit multiple selections. Add a “Don’t ask again” feature so that I don’t have confirm every time. Add an edit capability in the file manag… --- ## [Single Block addition](https://forum.onefinitycnc.com/t/single-block-addition/35681)
**Author:** [@creativesolutions](https://forum.onefinitycnc.com/u/creativesolutions)\ **Replies:** 1\ **Last updated:** [October 21, 2025, 4:42pm UTC](https://forum.onefinitycnc.com/t/single-block-addition/35681 "2025-10-21T16:42:22Z")
I noticed that the Masso controller has single block so you can step in the program, I’d like to request the Redline controller have this ability added. This would be very useful when initially running a new program for … --- ## [Redline post processor for Fabex cnc? (solved)](https://forum.onefinitycnc.com/t/redline-post-processor-for-fabex-cnc-solved/35879)
**Author:** [@UltraPeepi](https://forum.onefinitycnc.com/u/UltraPeepi)\ **Replies:** 10\ **Last updated:** [October 21, 2025, 4:39pm UTC](https://forum.onefinitycnc.com/t/redline-post-processor-for-fabex-cnc-solved/35879 "2025-10-21T16:39:23Z")
I use a Mac, Blender and FabEX CNC (formerly BlenderCAM). It supports a host of post processors. With my Buildbotics controller, I would use LinuxCNC and manually remove the M06 which apparently isn’t supported. Are ther… --- ## [Redline Controller Unresponsive (solved machine in spindle error state but no vfd plugged in))](https://forum.onefinitycnc.com/t/redline-controller-unresponsive-solved-machine-in-spindle-error-state-but-no-vfd-plugged-in/35902)
**Author:** [@BarkingBladeDesignCo](https://forum.onefinitycnc.com/u/BarkingBladeDesignCo)\ **Replies:** 11\ **Last updated:** [October 21, 2025, 4:23pm UTC](https://forum.onefinitycnc.com/t/redline-controller-unresponsive-solved-machine-in-spindle-error-state-but-no-vfd-plugged-in/35902 "2025-10-21T16:23:17Z")
My redline controller is unresponsive. There is NO manual for it, and I’m trying to move the Z slider so I can finish mounting everything. It keeps saying Error Line 0: Homing Error and Error Line 0: Machine Not Ready. I… [Next page](https://forum.onefinitycnc.com/c/machines-elite-series-masso/controller-redline-discussion/180.md?page=1)