{"users":[{"id":1,"username":"OnefinityCNC","name":"Onefinity CNC Official ✅","avatar_template":"/user_avatar/forum.onefinitycnc.com/onefinitycnc/{size}/7_2.png","admin":true,"trust_level":4},{"id":1416,"username":"ppd417","name":"Paul Dino","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/9dc877/{size}.png","trust_level":2},{"id":16227,"username":"kc.faircloth","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/e79b87/{size}.png","trust_level":1},{"id":13293,"username":"CMarshall","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/cc9497/{size}.png","trust_level":1},{"id":15502,"username":"Oldguy","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/oldguy/{size}/35832_2.png","trust_level":1},{"id":15469,"username":"evanhawkins04","name":"Evan","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/e/439d5e/{size}.png","trust_level":2},{"id":10465,"username":"Calvin","name":"Calvin","avatar_template":"/user_avatar/forum.onefinitycnc.com/calvin/{size}/32664_2.png","trust_level":2},{"id":12094,"username":"jrhumbleb","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/a6a055/{size}.png","trust_level":1},{"id":11719,"username":"oddcarout","name":"Zachariah","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/o/96bed5/{size}.png","trust_level":1},{"id":6060,"username":"PezWoodworks","name":"Pat","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/ea5d25/{size}.png","trust_level":2},{"id":6326,"username":"GarageRat","name":"Larry","avatar_template":"/user_avatar/forum.onefinitycnc.com/garagerat/{size}/22075_2.png","trust_level":2},{"id":15885,"username":"Gga","name":"Abc","avatar_template":"/user_avatar/forum.onefinitycnc.com/gga/{size}/36179_2.png","trust_level":2},{"id":12452,"username":"joejk","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/{size}.png","trust_level":2},{"id":14777,"username":"Crafty_Giant","name":"Shane","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/fbc32d/{size}.png","trust_level":1},{"id":13598,"username":"JimmyBuckets","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/{size}.png","trust_level":2},{"id":2120,"username":"SailorMike","name":"Michael Bruck","avatar_template":"/user_avatar/forum.onefinitycnc.com/sailormike/{size}/3290_2.png","trust_level":2},{"id":3281,"username":"ScottS","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/s/ac8455/{size}.png","trust_level":2},{"id":4655,"username":"HardtailSr","name":"robert mainville","avatar_template":"/user_avatar/forum.onefinitycnc.com/hardtailsr/{size}/35326_2.png","trust_level":2},{"id":688,"username":"TMToronto","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/7ea924/{size}.png","trust_level":2},{"id":6501,"username":"Discounttoolbox","name":"ROB MEYERS","avatar_template":"/user_avatar/forum.onefinitycnc.com/discounttoolbox/{size}/31115_2.png","trust_level":2},{"id":14033,"username":"Marblebuck","name":"Alan Barrington","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/e0b2c6/{size}.png","trust_level":1},{"id":14632,"username":"Joe_Sski","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/b38774/{size}.png","trust_level":1},{"id":14652,"username":"Rumor","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/rumor/{size}/35148_2.png","trust_level":2},{"id":12464,"username":"Macswoods","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/ad7895/{size}.png","trust_level":2},{"id":136,"username":"cyberreefguru","name":"The Guru","avatar_template":"/user_avatar/forum.onefinitycnc.com/cyberreefguru/{size}/27385_2.png","trust_level":2},{"id":2485,"username":"JimHatch","name":"Jim Hatch","avatar_template":"/user_avatar/forum.onefinitycnc.com/jimhatch/{size}/3928_2.png","trust_level":3},{"id":13399,"username":"L.M","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/l/a87d85/{size}.png","trust_level":2},{"id":10473,"username":"noahzenzen","name":"Noah","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/n/a5b964/{size}.png","trust_level":1},{"id":13985,"username":"EdwardR","name":"Edward","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/e/e0b2c6/{size}.png","trust_level":2},{"id":10468,"username":"TommyObar","name":"TObar","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/bcef8e/{size}.png","trust_level":2},{"id":476,"username":"gad5264","name":"Grant Davis","avatar_template":"/user_avatar/forum.onefinitycnc.com/gad5264/{size}/701_2.png","trust_level":2},{"id":91,"username":"Woodtick","name":"Rich Stephens","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/e99b99/{size}.png","trust_level":2},{"id":12179,"username":"Redlinecnc","name":"RedlineCNC Official","avatar_template":"/user_avatar/forum.onefinitycnc.com/redlinecnc/{size}/32571_2.png","moderator":true,"trust_level":3},{"id":1402,"username":"Morelli","name":"Joe","avatar_template":"/user_avatar/forum.onefinitycnc.com/morelli/{size}/23072_2.png","trust_level":0},{"id":14085,"username":"Generous_Cowbell","name":"Dan","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/g/3bc359/{size}.png","trust_level":2},{"id":2420,"username":"texasmac","name":"Richard McClelland","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/8e8cbc/{size}.png","trust_level":1},{"id":8201,"username":"pfm","name":"Paul Mooney","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/c5a1d2/{size}.png","trust_level":1},{"id":665,"username":"Eddie","name":"Eddie","avatar_template":"/user_avatar/forum.onefinitycnc.com/eddie/{size}/964_2.png","trust_level":2},{"id":10406,"username":"Derf","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/76d3ee/{size}.png","trust_level":1},{"id":8534,"username":"Ken5","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/f0a364/{size}.png","trust_level":2},{"id":13529,"username":"jwarmoth","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/7cd45c/{size}.png","trust_level":1},{"id":13455,"username":"shelzuuz","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/s/8491ac/{size}.png","trust_level":1},{"id":13705,"username":"SergeySatskiy","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/s/ea666f/{size}.png","trust_level":1},{"id":631,"username":"pwpacp","name":"Phil","avatar_template":"/user_avatar/forum.onefinitycnc.com/pwpacp/{size}/1718_2.png","trust_level":2},{"id":10023,"username":"northof49ww","name":"Curtis","avatar_template":"/user_avatar/forum.onefinitycnc.com/northof49ww/{size}/34586_2.png","trust_level":1},{"id":10247,"username":"CMcDaniel","name":"Craig","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/a698b9/{size}.png","trust_level":2},{"id":1272,"username":"pootaholic","name":"Dave","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/8e7dd6/{size}.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"filter":"latest","more_topics_url":"/c/onefinity-spindle-kit-by-redline-cnc/166?page=1","per_page":30,"topics":[{"fancy_title":"About the Onefinity Spindle Kit by Redline CNC category","id":29476,"title":"About the Onefinity Spindle Kit by Redline CNC category","slug":"about-the-onefinity-spindle-kit-by-redline-cnc-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/1/b/1b75de9a26bd4a5a8fdefb2149ce4685cc03489b_2_1024x819.jpeg","created_at":"2024-11-22T03:15:13.634Z","last_posted_at":"2024-11-22T03:15:13.639Z","bumped":true,"bumped_at":"2024-11-22T03:22:49.219Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Official Onefinity CNC Spindles by @Redlinecnc \n\n\nIntroducing the Onefinity Spindle Kit by Redline CNC.\n  \nThe Onefinity Spindle Kit by REDLINE CNC\nOnefinity Redline spindles are the most advanced plug and play spindle k…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":498,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":166,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Spindle Startup Problem","id":38719,"title":"Spindle Startup Problem","slug":"spindle-startup-problem","posts_count":5,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2026-05-15T21:35:36.408Z","last_posted_at":"2026-09-30T00:38:02.255Z","bumped":true,"bumped_at":"2026-09-30T00:38:02.255Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just installed the Redline 1.5kw 80mm spindle on my Gen 2 Elite WW.  When I powered up everything (HMI, VFD, VFD display), the HMI did not show any spindle errors nor did the VFD display (it was flashing 0.0). I rechec…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":131,"like_count":3,"has_summary":false,"last_poster_username":"kc.faircloth","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1416,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":16227,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Dust boot Gen 2 not fitting","id":40071,"title":"Dust boot Gen 2 not fitting","slug":"dust-boot-gen-2-not-fitting","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/1/1/112ac20c34f6d71d1fd1dcef61037d9e17f4e194_2_1024x819.jpeg","created_at":"2026-08-26T02:12:31.097Z","last_posted_at":"2026-09-20T05:24:58.584Z","bumped":true,"bumped_at":"2026-09-20T05:24:58.584Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The Official Spindle of Onefinity CNC by @Redlinecnc \n\n\nI have the 65mm spindle and the Gen 2 dust boot hits every time I lower the spindle…does anybody else have this issue?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":127,"like_count":4,"has_summary":false,"last_poster_username":"jrhumbleb","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":13293,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":15502,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":15469,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":10465,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":12094,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Best collets for the Redline Spindle","id":33767,"title":"Best collets for the Redline Spindle","slug":"best-collets-for-the-redline-spindle","posts_count":8,"reply_count":1,"highest_post_number":8,"image_url":null,"created_at":"2025-06-09T21:26:04.800Z","last_posted_at":"2026-08-29T20:10:32.705Z","bumped":true,"bumped_at":"2026-08-29T20:10:32.705Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just set up my spindle and am awaiting my tool changer. I need to acquire some collets for the ATC. They are ER20 collets, but I don’t know if I can just order them off of amazon or if there is a better place to get th…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":633,"like_count":13,"has_summary":false,"last_poster_username":"joejk","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":11719,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6060,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6326,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":15885,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":12452,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Spindle stops rotating mid carve. Redline 2.2kw","id":39273,"title":"Spindle stops rotating mid carve. Redline 2.2kw","slug":"spindle-stops-rotating-mid-carve-redline-2-2kw","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":null,"created_at":"2026-07-05T18:05:26.603Z","last_posted_at":"2026-08-03T11:45:45.455Z","bumped":true,"bumped_at":"2026-08-03T11:45:45.455Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I haven’t had this CNC for long, just a few days, but I have am now having the problem of the spindle stopping rotating in the middle of carves and receiving error code 12. The rest of the machine keeps running. \nI have …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":191,"like_count":4,"has_summary":false,"last_poster_username":"ScottS","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14777,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":3281,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"ER20 collet advice","id":39412,"title":"ER20 collet advice","slug":"er20-collet-advice","posts_count":4,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-07-27T20:43:38.252Z","last_posted_at":"2026-07-28T01:05:29.634Z","bumped":true,"bumped_at":"2026-07-28T01:05:29.634Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have been looking now for hours on line for an ER 20 collet that will hold a #7 drill bit. 13/64ths Amazon’s algorithm is so stupid all it shows in 13/32nds and pretty much the same with Zoro and tools today etc. Is a #…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":144,"like_count":10,"has_summary":false,"last_poster_username":"Discounttoolbox","category_id":166,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":12452,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":6501,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"OK I give up on the DRO","id":39260,"title":"OK I give up on the DRO","slug":"ok-i-give-up-on-the-dro","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-07-02T16:32:03.754Z","last_posted_at":"2026-07-02T16:55:12.826Z","bumped":true,"bumped_at":"2026-07-02T16:55:12.826Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Please explain why I need a DRO? \nIt seems to exist only to stop me from the warm-up. \nThe videos just tell me how to program it. But nothing tells me what I am programming for. As far as I know the Vectric software has …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":152,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14033,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Spindle goes to max speed, cannot control speed","id":39226,"title":"Spindle goes to max speed, cannot control speed","slug":"spindle-goes-to-max-speed-cannot-control-speed","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-06-27T20:23:32.277Z","last_posted_at":"2026-06-27T20:23:32.366Z","bumped":true,"bumped_at":"2026-06-27T20:23:32.366Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Onefinity Spindle Kit by Redline CNC | 80mm 1.5kw Air Cooled 110v \nRedline controller with HMI \nI can control the speed from the DRO, low to high; but whatever I set on the HMI just spins it up to max.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":55,"like_count":0,"has_summary":false,"last_poster_username":"Joe_Sski","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":14632,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline Contoller 80mm Not powering on (solved, forgot fuse install)","id":38911,"title":"Redline Contoller 80mm Not powering on (solved, forgot fuse install)","slug":"redline-contoller-80mm-not-powering-on-solved-forgot-fuse-install","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/7/a/7a92e91dbe14a3bd9392abbf9fbd5361cc5ac828_2_768x1024.jpeg","created_at":"2026-06-07T19:16:27.064Z","last_posted_at":"2026-06-07T20:14:27.411Z","bumped":true,"bumped_at":"2026-06-07T20:14:27.411Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Newbie again, just getting around to hooking up the spindle. Everything else has worked up to this point. I have the HMI screen, it homes correctly, I can move everything around. I followed everything on the video and do…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":71,"like_count":9,"has_summary":false,"last_poster_username":"TMToronto","category_id":166,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14652,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":688,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"GFCI popping Redline Spindle","id":38853,"title":"GFCI popping Redline Spindle","slug":"gfci-popping-redline-spindle","posts_count":17,"reply_count":12,"highest_post_number":17,"image_url":null,"created_at":"2026-05-31T23:59:55.260Z","last_posted_at":"2026-06-03T11:42:07.036Z","bumped":true,"bumped_at":"2026-06-03T11:42:07.036Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I was gone for a few weeks, came back, tried to run some files on my Onefinity and the GFCI keeps popping.  My whole shop is set up with them. Plugged it in to a few different ones, same result.  It’s fine until it gets …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":272,"like_count":16,"has_summary":false,"last_poster_username":"L.M","category_id":168,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":12464,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":136,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2485,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline spindle Digital Read Out","id":38198,"title":"Redline spindle Digital Read Out","slug":"redline-spindle-digital-read-out","posts_count":7,"reply_count":0,"highest_post_number":7,"image_url":null,"created_at":"2026-04-16T22:30:56.162Z","last_posted_at":"2026-05-19T12:57:43.655Z","bumped":true,"bumped_at":"2026-05-19T12:57:43.655Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Just wondering if anyone uses the Redline Digital Read Out for anything. I’ve been ignoring mine but not really sure what the purpose is for. Would it be for just varying spindle speed?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":160,"like_count":6,"has_summary":false,"last_poster_username":"TommyObar","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":10473,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":13985,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10468,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline upgrade kit batch numbers","id":38700,"title":"Redline upgrade kit batch numbers","slug":"redline-upgrade-kit-batch-numbers","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/c/1/c165935e40782f23c154fcce699734ded7861eeb.png","created_at":"2026-05-13T14:34:11.567Z","last_posted_at":"2026-05-19T04:23:11.970Z","bumped":true,"bumped_at":"2026-05-19T04:23:11.970Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Is there any difference in the Redline spindles based on the batch number and release?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":74,"like_count":2,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":476,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"3D printed attachments","id":38697,"title":"3D printed attachments","slug":"3d-printed-attachments","posts_count":5,"reply_count":3,"highest_post_number":5,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/1/1/112ac20c34f6d71d1fd1dcef61037d9e17f4e194_2_1024x819.jpeg","created_at":"2026-05-13T13:06:11.034Z","last_posted_at":"2026-05-13T21:15:22.391Z","bumped":true,"bumped_at":"2026-05-13T21:15:22.391Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"A few days back, I saw some 3D printed attachments to sit the Redline controller on the table to keep it stationary. Now I cannot find the thread. Any chance someone knows where it might be? \nThanks in advance \nThe Offic…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":148,"like_count":3,"has_summary":false,"last_poster_username":"Woodtick","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":476,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":91,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New trouble, very dangerous (Solved, VFD requires reprogramming)","id":38533,"title":"New trouble, very dangerous (Solved, VFD requires reprogramming)","slug":"new-trouble-very-dangerous-solved-vfd-requires-reprogramming","posts_count":73,"reply_count":49,"highest_post_number":80,"image_url":null,"created_at":"2026-04-25T16:35:30.520Z","last_posted_at":"2026-05-01T15:34:50.039Z","bumped":true,"bumped_at":"2026-05-01T15:34:50.039Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I ran my first successful program today. A pocket tool path for flattening. When it was done the HMI screen said program completed and I clicked ok. Nothing happened. The vac did not shut off the spindle did not stop. In…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"visibility_reason_id":4,"views":1118,"like_count":137,"has_summary":true,"last_poster_username":"OnefinityCNC","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":12179,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1402,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline Spindle Technical Bulletin VFD Over-Voltage Fault 4/29/26","id":38568,"title":"Redline Spindle Technical Bulletin VFD Over-Voltage Fault 4/29/26","slug":"redline-spindle-technical-bulletin-vfd-over-voltage-fault-4-29-26","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/c/8/c89b5c0316f0940fa4d9ab689897aa70a3a17700_2_1024x576.jpeg","created_at":"2026-04-29T20:26:31.741Z","last_posted_at":"2026-04-29T20:26:31.914Z","bumped":true,"bumped_at":"2026-04-29T20:26:31.914Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Redline Spindle Technical Bulletin VFD Over-Voltage Fault 4/29/26\nRedline CNC Technical Bulletin \nSubject: VFD Over-Voltage Fault — Root Cause Identified & Final Resolution Instructions \nApplies To: 220-volt North Americ…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":136,"like_count":4,"has_summary":false,"last_poster_username":"Redlinecnc","category_id":176,"op_like_count":4,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":12179,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline vfd requested feature","id":37185,"title":"Redline vfd requested feature","slug":"redline-vfd-requested-feature","posts_count":12,"reply_count":8,"highest_post_number":12,"image_url":null,"created_at":"2026-01-14T17:17:52.249Z","last_posted_at":"2026-04-20T21:30:19.002Z","bumped":true,"bumped_at":"2026-04-20T21:30:19.002Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hello Onefinity. I have one machine at the moment with a batch2 gen2 on order. the redline controller that is a desktop mount does not come with any way to actually mount it to the desktop! It just sits there with only g…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":315,"like_count":16,"has_summary":false,"last_poster_username":"HardtailSr","category_id":166,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":91,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":14085,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline Error code 14 (solved, link in comments)","id":36844,"title":"Redline Error code 14 (solved, link in comments)","slug":"redline-error-code-14-solved-link-in-comments","posts_count":6,"reply_count":3,"highest_post_number":6,"image_url":null,"created_at":"2025-12-12T21:21:45.391Z","last_posted_at":"2026-04-13T16:18:44.950Z","bumped":true,"bumped_at":"2026-04-13T16:18:44.950Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Just assembled my new Onefinity with the Redline spindle and controller.  I am getting Error code 14 on the DRO.  I have tried all the possible resolutions shown in the Redline manual to no avail.  Have checked and reche…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":560,"like_count":4,"has_summary":false,"last_poster_username":"L.M","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2420,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":2485,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Reducing EMI with Redline Spindle","id":38040,"title":"Reducing EMI with Redline Spindle","slug":"reducing-emi-with-redline-spindle","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-03-31T19:47:27.584Z","last_posted_at":"2026-03-31T19:47:27.693Z","bumped":true,"bumped_at":"2026-03-31T19:47:27.693Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I bought a Redline spindle a couple of months ago but haven’t installed it yet. The reason is that I’m hearing about the problems with the EMI produced by the spindle and Redline VFD. I was talking to my son about it. He…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":120,"like_count":0,"has_summary":false,"last_poster_username":"pfm","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":8201,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Address a Redline Spindle Communication Error and Error 14 (FAQ)","id":38026,"title":"How to Address a Redline Spindle Communication Error and Error 14 (FAQ)","slug":"how-to-address-a-redline-spindle-communication-error-and-error-14-faq","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/2/1/21dc4eb2c59e61c8690053049385f7cba91e4a86_2_1024x576.jpeg","created_at":"2026-03-30T15:38:34.367Z","last_posted_at":"2026-03-30T15:38:34.464Z","bumped":true,"bumped_at":"2026-03-30T15:38:34.464Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"How to Address a Redline Spindle Communication Error and Error 14 (FAQ)","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":114,"like_count":2,"has_summary":false,"last_poster_username":"Redlinecnc","category_id":176,"op_like_count":2,"pinned_globally":false,"featured_link":"https://www.youtube.com/watch?v=JGGYhOrV5F4","featured_link_root_domain":"youtube.com","is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":12179,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Onefinity Spindle Kit by Redline CNC | Redline/Realtime Controller Installation Video","id":37921,"title":"Onefinity Spindle Kit by Redline CNC | Redline/Realtime Controller Installation Video","slug":"onefinity-spindle-kit-by-redline-cnc-redline-realtime-controller-installation-video","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/2/b/2ba55bac1fa11049400550db72a9ba246ef2bc4e_2_1024x576.jpeg","created_at":"2026-03-18T20:56:26.714Z","last_posted_at":"2026-03-18T20:56:26.784Z","bumped":true,"bumped_at":"2026-03-18T20:56:26.784Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":87,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":176,"op_like_count":1,"pinned_globally":false,"featured_link":"https://youtu.be/kcRKevnDB6s","featured_link_root_domain":"youtu.be","is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Upgrade to Redline Spindle","id":37562,"title":"Upgrade to Redline Spindle","slug":"upgrade-to-redline-spindle","posts_count":19,"reply_count":13,"highest_post_number":19,"image_url":null,"created_at":"2026-02-23T21:49:23.586Z","last_posted_at":"2026-03-13T22:22:11.924Z","bumped":true,"bumped_at":"2026-03-13T22:22:11.924Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am looking at upgrading to the redline 65 mm spindle to replacing my router.  l have the BB controller and would have to remove my brake out board in order to plug in the VFD cable. I have my router and dust collector …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":317,"like_count":13,"has_summary":false,"last_poster_username":"Eddie","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":665,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster, Accepted Answer","user_id":6501,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10406,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13985,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline Spindle Squeal- Problem potentially solved","id":37791,"title":"Redline Spindle Squeal- Problem potentially solved","slug":"redline-spindle-squeal-problem-potentially-solved","posts_count":9,"reply_count":7,"highest_post_number":9,"image_url":null,"created_at":"2026-03-06T23:03:00.373Z","last_posted_at":"2026-03-12T13:33:43.352Z","bumped":true,"bumped_at":"2026-03-12T13:33:43.352Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So I have been having an issue with the bearing noise ( See previous video posted) \nI think I may have come across a solution accidentally \nSo I was doing a manual warm up following the new slow start sequence at 500 rpm…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":248,"like_count":8,"has_summary":false,"last_poster_username":"JimHatch","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1416,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2485,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline VFD QCW under table mount options","id":37844,"title":"Redline VFD QCW under table mount options","slug":"redline-vfd-qcw-under-table-mount-options","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-03-12T00:24:51.469Z","last_posted_at":"2026-03-12T00:26:31.084Z","bumped":true,"bumped_at":"2026-03-12T00:26:31.084Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Curious how others are mounting their Redline VFD using the under table mount to a QCW stand.  The mounting bracket is too wide to screw onto the waste board supports and there are no other flat surfaces to attach it to.…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":134,"like_count":4,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":166,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":13529,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline CNC Spindle Squealing? (Redline Official FAQ)","id":37722,"title":"Redline CNC Spindle Squealing? (Redline Official FAQ)","slug":"redline-cnc-spindle-squealing-redline-official-faq","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-03-03T16:23:03.398Z","last_posted_at":"2026-03-03T16:23:03.470Z","bumped":true,"bumped_at":"2026-03-03T16:23:03.470Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Why Your Spindle Squeals — And What To Do About It \nA squealing spindle can be alarming, but in most cases it’s not a catastrophic failure — it’s a warning sign. Understanding why it happens and how to respond can dramat…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":115,"like_count":1,"has_summary":false,"last_poster_username":"Redlinecnc","category_id":176,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":12179,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Using the Redline 2.2kW Spindle on 208v?","id":37547,"title":"Using the Redline 2.2kW Spindle on 208v?","slug":"using-the-redline-2-2kw-spindle-on-208v","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2026-02-22T17:21:08.539Z","last_posted_at":"2026-02-22T19:21:26.579Z","bumped":true,"bumped_at":"2026-02-22T19:21:26.579Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Is anybody here running it on 208v? \nI can use a transformer to go from 208v to 240v but just wondering whether it’s really needed since it’s rated as a 220v device, so 208v is actually closer to spec than 240v.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":161,"like_count":3,"has_summary":false,"last_poster_username":"JimmyBuckets","category_id":166,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":13455,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New warm-up inconsistency with break-in procedure?","id":37530,"title":"New warm-up inconsistency with break-in procedure?","slug":"new-warm-up-inconsistency-with-break-in-procedure","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-02-20T15:58:39.054Z","last_posted_at":"2026-02-21T13:21:19.813Z","bumped":true,"bumped_at":"2026-02-21T13:21:19.813Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The most up to date redline spindle documentation asks for the following break-in procedure: \n6,000 RPM for 20–30 minutes \n9,000 RPM and run for another 20–30 minutes \n12,000 RPM for 20–30 minutes \n18,000 RPM for 20–30 m…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":284,"like_count":4,"has_summary":false,"last_poster_username":"pwpacp","category_id":166,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":13705,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":631,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline Spindle DRO Readout Error","id":37506,"title":"Redline Spindle DRO Readout Error","slug":"redline-spindle-dro-readout-error","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2026-02-18T00:10:58.496Z","last_posted_at":"2026-02-18T01:33:47.381Z","bumped":true,"bumped_at":"2026-02-18T01:33:47.381Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just set my Redline 65MM spindle and I’m working on the break-in procedure. The digital read out isn’t showing the same RPM as I have set up in the G Code. \nG Code RPM            DRO RPM                                …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":110,"like_count":7,"has_summary":false,"last_poster_username":"L.M","category_id":167,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":10023,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":13399,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Spindle Noise Update","id":37440,"title":"Spindle Noise Update","slug":"spindle-noise-update","posts_count":31,"reply_count":19,"highest_post_number":31,"image_url":null,"created_at":"2026-02-12T15:48:18.479Z","last_posted_at":"2026-02-17T20:06:11.578Z","bumped":true,"bumped_at":"2026-02-17T20:06:11.578Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m posting this in the main Redline category because I think it would apply to all of the spindles that use ceramic bearings… \nWhen I got my Redline spindle (1.5kw 80mm), I went through the extensive break in process an…","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"views":659,"like_count":38,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":166,"op_like_count":4,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":10247,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Recent Poster","user_id":1272,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Change to Spindle Warm-Up Procedure (2/13/26)","id":37449,"title":"Change to Spindle Warm-Up Procedure (2/13/26)","slug":"change-to-spindle-warm-up-procedure-2-13-26","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-02-13T15:46:29.950Z","last_posted_at":"2026-02-13T15:46:30.040Z","bumped":true,"bumped_at":"2026-02-13T15:46:30.040Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Updated 2/13/26 \nPurpose of This Bulletin: \nFollowing extensive customer feedback and an internal review of spindle warm‑up methodologies, we have identified a more effective procedure specifically tailored for spindles …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":327,"like_count":4,"has_summary":false,"last_poster_username":"Redlinecnc","category_id":176,"op_like_count":4,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":12179,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"What type of Plug for Redline 220v spindle?","id":37319,"title":"What type of Plug for Redline 220v spindle?","slug":"what-type-of-plug-for-redline-220v-spindle","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-01-27T21:20:27.958Z","last_posted_at":"2026-01-27T21:31:34.840Z","bumped":true,"bumped_at":"2026-01-27T21:31:34.840Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"My machine will have the 2.2 kW 220V spindle. What is the plug for this? I need to start the  electrical install/","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":134,"like_count":1,"has_summary":false,"last_poster_username":"Ken5","category_id":169,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14033,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null}]}]}}