{"users":[{"id":1,"username":"OnefinityCNC","name":"Onefinity CNC Official ✅","avatar_template":"/user_avatar/forum.onefinitycnc.com/onefinitycnc/{size}/7_2.png","admin":true,"trust_level":4},{"id":3237,"username":"tjp52","name":"Tom","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/34f0e0/{size}.png","trust_level":2},{"id":11096,"username":"Matt1370","name":"Matt ","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/f17d59/{size}.png","trust_level":1},{"id":14085,"username":"Generous_Cowbell","name":"Dan","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/g/3bc359/{size}.png","trust_level":2},{"id":14713,"username":"hweinfeld1","name":"LanceLink1","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/h/e19adc/{size}.png","trust_level":1},{"id":15364,"username":"Charlie_Delta","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/3be4f8/{size}.png","trust_level":1},{"id":14331,"username":"RoostersWay","name":"Steven","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/r/ed655f/{size}.png","trust_level":1},{"id":14796,"username":"SteveDT","name":"Steve","avatar_template":"/user_avatar/forum.onefinitycnc.com/stevedt/{size}/35355_2.png","trust_level":1},{"id":13399,"username":"L.M","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/l/a87d85/{size}.png","trust_level":3},{"id":14258,"username":"dwhite1031","name":"Doug White","avatar_template":"/user_avatar/forum.onefinitycnc.com/dwhite1031/{size}/35544_2.png","trust_level":1},{"id":6269,"username":"ahandeman","name":"Troy Johnson","avatar_template":"/user_avatar/forum.onefinitycnc.com/ahandeman/{size}/22002_2.png","trust_level":2},{"id":12825,"username":"HgR","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/h/57b2e6/{size}.png","trust_level":1},{"id":13188,"username":"RTCNC","name":"RealTime CNC","avatar_template":"/user_avatar/forum.onefinitycnc.com/rtcnc/{size}/33487_2.png","moderator":true,"trust_level":4},{"id":11772,"username":"dotyman","name":"John Doty","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/bc8723/{size}.png","trust_level":1},{"id":2493,"username":"BuilderBro","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/9e8a1a/{size}.png","trust_level":2},{"id":13458,"username":"LFwood","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/l/f08c70/{size}.png","trust_level":2},{"id":2208,"username":"dsunds","name":"David","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/50afbb/{size}.png","trust_level":2},{"id":688,"username":"TMToronto","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/7ea924/{size}.png","trust_level":3},{"id":2120,"username":"SailorMike","name":"Michael Bruck","avatar_template":"/user_avatar/forum.onefinitycnc.com/sailormike/{size}/3290_2.png","trust_level":2},{"id":6206,"username":"ds53652","name":"Roger","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/3ec8ea/{size}.png","trust_level":3},{"id":12775,"username":"SamuelBarker","name":"Sam","avatar_template":"/user_avatar/forum.onefinitycnc.com/samuelbarker/{size}/34838_2.png","trust_level":1},{"id":14057,"username":"teparker","name":"Tim","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/ecccb3/{size}.png","trust_level":1},{"id":14606,"username":"Roho","name":"Rhett Evans","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/r/c89c15/{size}.png","trust_level":1},{"id":14709,"username":"Tazmo","name":"Randy Benetti","avatar_template":"/user_avatar/forum.onefinitycnc.com/tazmo/{size}/35210_2.png","trust_level":2},{"id":4655,"username":"HardtailSr","name":"robert mainville","avatar_template":"/user_avatar/forum.onefinitycnc.com/hardtailsr/{size}/35326_2.png","trust_level":3},{"id":3786,"username":"jhagle","name":"Joel","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/c2a13f/{size}.png","trust_level":2},{"id":5615,"username":"Bork","name":"Mike","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/76d3ee/{size}.png","trust_level":2},{"id":10691,"username":"IncrementalDesigns","name":"Incremental Designs","avatar_template":"/user_avatar/forum.onefinitycnc.com/incrementaldesigns/{size}/31328_2.png","trust_level":2},{"id":631,"username":"pwpacp","name":"Phil","avatar_template":"/user_avatar/forum.onefinitycnc.com/pwpacp/{size}/1718_2.png","trust_level":3},{"id":9240,"username":"WayneP","name":"Wayne ","avatar_template":"/user_avatar/forum.onefinitycnc.com/waynep/{size}/28320_2.png","trust_level":1}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/rtcnc-controller/209?page=1","per_page":30,"topics":[{"fancy_title":"About the RealTime Controller (RTCNC) category","id":38190,"title":"About the RealTime Controller (RTCNC) category","slug":"about-the-realtime-controller-rtcnc-category","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-16T19:58:49.998Z","last_posted_at":"2026-04-16T19:58:50.004Z","bumped":true,"bumped_at":"2026-04-16T19:58:49.998Z","archetype":"regular","unseen":false,"pinned":true,"unpinned":null,"excerpt":"Discussion of the RTCNC Controller (Realtime CNC) use with Gen 2 machines, apprentice, and Redline HMI.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":43,"like_count":0,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":209,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Wireless Joystick and Redline controller","id":38033,"title":"Wireless Joystick and Redline controller","slug":"wireless-joystick-and-redline-controller","posts_count":37,"reply_count":26,"highest_post_number":37,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/7/4/74535d2399db254de8f172bf399cc713d62bc4f1_2_1024x576.jpeg","created_at":"2026-03-31T00:09:34.581Z","last_posted_at":"2026-06-09T23:14:38.175Z","bumped":true,"bumped_at":"2026-06-09T23:14:38.175Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Has anyone gotten the official Onefinity wireless gamepad to work with RedLine? \nI have tried numerous attempts, same result. \nIt just fails to detect and fails to work. \nWhen the machine boots I receive these errors whi…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":551,"like_count":41,"has_summary":false,"last_poster_username":"hweinfeld1","category_id":212,"op_like_count":2,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3237,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11096,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14085,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14713,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Manual Tool Change Problems","id":38912,"title":"Manual Tool Change Problems","slug":"manual-tool-change-problems","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-07T19:19:20.440Z","last_posted_at":"2026-06-08T00:19:28.814Z","bumped":true,"bumped_at":"2026-06-08T00:19:28.814Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am new to CNC. I have an apprentice with redline controller, HMI, and 65mm spindle. I am using Carveco. I have created a toolpath with multiple bits, I have remembered to number the different bits so I can save all the…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":58,"like_count":1,"has_summary":false,"last_poster_username":"RoostersWay","category_id":209,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":15364,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":14331,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline HMI update issue?","id":38889,"title":"Redline HMI update issue?","slug":"redline-hmi-update-issue","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/8/2/828363a9ed3b828cc5b77dcef0b07e6069795a97_2_1024x785.jpeg","created_at":"2026-06-04T22:08:14.231Z","last_posted_at":"2026-06-05T13:18:32.833Z","bumped":true,"bumped_at":"2026-06-05T13:18:32.833Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So, I have a Gen 2 OneFinity Journeyman with a Redline HMI. I checked today and found there was a zillion gig update. Downloaded the update and all seemed fine until this point shown in the image,. This has been stuck on…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":105,"like_count":8,"has_summary":false,"last_poster_username":"SteveDT","category_id":209,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14796,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New Taskbar Icon descriptions for Realtime controller firmware 1.5.9+ (FAQ)","id":38879,"title":"New Taskbar Icon descriptions for Realtime controller firmware 1.5.9+ (FAQ)","slug":"new-taskbar-icon-descriptions-for-realtime-controller-firmware-1-5-9-faq","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/5/4/5456c687171a1b700c69b14dd04e01f7bdab0c0b.png","created_at":"2026-06-04T16:35:30.072Z","last_posted_at":"2026-06-04T16:35:30.167Z","bumped":true,"bumped_at":"2026-06-04T16:35:30.167Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"New Taskbar Icon descriptions for Realtime controller firmware 1.5.9+","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":80,"like_count":3,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":213,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"RTS-X Now Supports Logitech F310 game controller","id":38815,"title":"RTS-X Now Supports Logitech F310 game controller","slug":"rts-x-now-supports-logitech-f310-game-controller","posts_count":3,"reply_count":0,"highest_post_number":4,"image_url":null,"created_at":"2026-05-26T20:13:00.395Z","last_posted_at":"2026-05-31T19:24:48.217Z","bumped":true,"bumped_at":"2026-05-31T19:24:48.217Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The latest firmware update documentation states that version 1.5.9 (released 6-22-2026) has added support for the Logitech F310 game controller.  Good to know since the EasySMX ESM-9013 wired game controller has been dis…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":121,"like_count":5,"has_summary":false,"last_poster_username":"dwhite1031","category_id":209,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14258,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6269,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Feature/UX Issue: No automatic UI response on M6 tool change command","id":37901,"title":"Feature/UX Issue: No automatic UI response on M6 tool change command","slug":"feature-ux-issue-no-automatic-ui-response-on-m6-tool-change-command","posts_count":6,"reply_count":4,"highest_post_number":6,"image_url":null,"created_at":"2026-03-16T21:25:03.519Z","last_posted_at":"2026-05-30T20:29:04.551Z","bumped":true,"bumped_at":"2026-05-30T20:29:04.551Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m running a Onefinity Elite Gen 1 Foreman (48"x48") with a Redline controller on firmware 1.4.9, and I’d like to report what I believe is a UX issue with the M6 tool change handling. \nCURRENT BEHAVIOR \nWhen the control…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":124,"like_count":9,"has_summary":false,"last_poster_username":"BuilderBro","category_id":17,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":12825,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":13188,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":11772,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2493,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Feature request: Spindle load while cutting","id":38828,"title":"Feature request: Spindle load while cutting","slug":"feature-request-spindle-load-while-cutting","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-28T18:09:03.437Z","last_posted_at":"2026-05-28T18:09:03.535Z","bumped":true,"bumped_at":"2026-05-28T18:09:03.535Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"One feature that would be great is to see what the spindle load is while cutting. I know you can go back to the home screen to check but having a readout in the cut screen would help so you know if you have room to adjus…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":56,"like_count":3,"has_summary":false,"last_poster_username":"LFwood","category_id":17,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":13458,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Wear compensations crashes fusion post processor (realtime)","id":38814,"title":"Wear compensations crashes fusion post processor (realtime)","slug":"wear-compensations-crashes-fusion-post-processor-realtime","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/d/a/dab40a0c84fd73f774bb8fc437133832fa424554_2_491x1024.png","created_at":"2026-05-26T19:12:31.964Z","last_posted_at":"2026-05-26T21:07:18.305Z","bumped":true,"bumped_at":"2026-05-26T21:07:18.305Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Trying to set wear compensation in a 2D pocket operation, crashes the latest post-processor without errors in the log. Version 2 (2026-4-19) \nI really wanted to test this as I am getting slightly undersized holes and wan…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":51,"like_count":3,"has_summary":false,"last_poster_username":"TMToronto","category_id":210,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":2208,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Lightburn, Redline Controller and Camera support","id":38816,"title":"Lightburn, Redline Controller and Camera support","slug":"lightburn-redline-controller-and-camera-support","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-26T20:57:44.803Z","last_posted_at":"2026-05-26T20:57:44.975Z","bumped":true,"bumped_at":"2026-05-26T20:57:44.975Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m currently exploring the capabilities of Lightburn. I learned from this post that the Redline controller supports a USB camera. Has anyone attempted to use this setup to utilize the camera features in Lightburn, or is…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":49,"like_count":0,"has_summary":false,"last_poster_username":"SailorMike","category_id":17,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2120,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Realtime Inputs and Outputs (FAQ)","id":38810,"title":"Realtime Inputs and Outputs (FAQ)","slug":"realtime-inputs-and-outputs-faq","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-26T15:04:03.697Z","last_posted_at":"2026-05-26T15:04:04.003Z","bumped":true,"bumped_at":"2026-05-26T15:04:04.003Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":50,"like_count":0,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":213,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Realtime Static and Grounding (FAQ)","id":38809,"title":"Realtime Static and Grounding (FAQ)","slug":"realtime-static-and-grounding-faq","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-26T15:03:26.768Z","last_posted_at":"2026-05-26T15:03:26.983Z","bumped":true,"bumped_at":"2026-05-26T15:03:26.983Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":53,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":213,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Realtime Estop (FAQ)","id":38808,"title":"Realtime Estop (FAQ)","slug":"realtime-estop-faq","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-26T15:02:41.923Z","last_posted_at":"2026-05-26T15:02:42.061Z","bumped":true,"bumped_at":"2026-05-26T15:02:42.061Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":47,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":213,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Make sure you check your probe dimensions (realtime controller)","id":38588,"title":"Make sure you check your probe dimensions (realtime controller)","slug":"make-sure-you-check-your-probe-dimensions-realtime-controller","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/7/c/7c4febda5f91b5dad3e944a1606db0e20a639488_2_768x1024.jpeg","created_at":"2026-04-30T14:00:30.311Z","last_posted_at":"2026-05-19T19:05:00.563Z","bumped":true,"bumped_at":"2026-05-19T19:05:00.563Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Just FYI…I’m not sure where they got their probe dimensions from, but the default Redline/Realtime Z dimension was almost .25" off from my actual probe.  I recall the Buildbotics defaults were a little off, but not this …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":125,"like_count":4,"has_summary":false,"last_poster_username":"LFwood","category_id":211,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":6206,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13458,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Hybrid ATC/Manual Tool Change","id":38613,"title":"Hybrid ATC/Manual Tool Change","slug":"hybrid-atc-manual-tool-change","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-03T17:42:36.838Z","last_posted_at":"2026-05-03T17:42:36.933Z","bumped":true,"bumped_at":"2026-05-03T17:42:36.933Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"When a tool is commanded that is not loaded in the ATC while in automatic tool change mode the program fails.  This is detailed here: Easy ATC Software Beta for Realtime Controller (Official FAQ) - #27 by enyegaard . \nDe…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":71,"like_count":3,"has_summary":false,"last_poster_username":"SamuelBarker","category_id":17,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":12775,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"How to Set Up a Post Processor and Export G-Code for Onefinity Redline Motion Control System / RealTime Controller in Vectric (FAQ)","id":38595,"title":"How to Set Up a Post Processor and Export G-Code for Onefinity Redline Motion Control System / RealTime Controller in Vectric (FAQ)","slug":"how-to-set-up-a-post-processor-and-export-g-code-for-onefinity-redline-motion-control-system-realtime-controller-in-vectric-faq","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/1/6/1674dba84b1df4d14f6df55f6c468ac3db4cf5f2_2_1024x576.jpeg","created_at":"2026-05-01T15:03:38.067Z","last_posted_at":"2026-05-01T15:03:38.218Z","bumped":true,"bumped_at":"2026-05-01T15:03:38.218Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"How to Set Up a Post Processor and Export G-Code for Onefinity Redline Motion Control System / RealTime Controller in Vectric\nIf you’re running a Onefinity CNC with the Redline motion control system and RealTime Controll…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":73,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":213,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Ability to change/modify/customize the Gamepad Controller button assignments","id":38571,"title":"Ability to change/modify/customize the Gamepad Controller button assignments","slug":"ability-to-change-modify-customize-the-gamepad-controller-button-assignments","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-04-29T22:19:54.628Z","last_posted_at":"2026-04-30T17:22:57.338Z","bumped":true,"bumped_at":"2026-04-30T17:22:57.338Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Can we add the ability to change/modify/customize the Gamepad Controller button assignments?   Coming from the Buildbotics platform, I really liked being able to change the 4 movement speeds right on the gamepad controll…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":72,"like_count":3,"has_summary":false,"last_poster_username":"Generous_Cowbell","category_id":17,"op_like_count":2,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":6206,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14085,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Home machine prompt upon bootup, like Buildbotics did","id":38570,"title":"Home machine prompt upon bootup, like Buildbotics did","slug":"home-machine-prompt-upon-bootup-like-buildbotics-did","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-29T22:12:34.786Z","last_posted_at":"2026-04-29T22:12:34.869Z","bumped":true,"bumped_at":"2026-04-29T22:12:34.869Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Can we make it so that upon bootup, the machine prompts you to Home the machine, just like it did on the Buildbotics controller?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":42,"like_count":0,"has_summary":false,"last_poster_username":"ds53652","category_id":17,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":6206,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline does not handle machine coord properly","id":38523,"title":"Redline does not handle machine coord properly","slug":"redline-does-not-handle-machine-coord-properly","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-04-24T03:06:28.277Z","last_posted_at":"2026-04-28T23:03:56.876Z","bumped":true,"bumped_at":"2026-04-28T23:03:56.876Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have the Woodworker version, with max X and Y at about 760mm.  I tend to use the work piece offsets of x about 300 and y about 80. \nI would like to park the spindle at the back right after running, so it is easy to swe…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":105,"like_count":5,"has_summary":false,"last_poster_username":"dotyman","category_id":210,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14057,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":11772,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Elapsed time/Estimated Time","id":38547,"title":"Elapsed time/Estimated Time","slug":"elapsed-time-estimated-time","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-27T13:51:16.922Z","last_posted_at":"2026-04-27T13:51:17.026Z","bumped":true,"bumped_at":"2026-04-27T13:51:17.026Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"During the carve the elapsed and estimated time seems to work really well, however, when the carve is complete an acknowledgement pops up and when you press OK the carve time goes away and there is a much shorter time di…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":65,"like_count":0,"has_summary":false,"last_poster_username":"Roho","category_id":211,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":14606,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Is there a 3D Touch Probe Available to Work with Redline Controller","id":38541,"title":"Is there a 3D Touch Probe Available to Work with Redline Controller","slug":"is-there-a-3d-touch-probe-available-to-work-with-redline-controller","posts_count":3,"reply_count":0,"highest_post_number":3,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/f/e/fe9e987767c73f959ead48178ccabeafe5605aae_2_1024x402.jpeg","created_at":"2026-04-26T12:57:40.125Z","last_posted_at":"2026-04-26T15:24:20.193Z","bumped":true,"bumped_at":"2026-04-26T15:24:20.193Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"It would be really nice if there were a 3D touch probe that could be used with the Redline Controller.  I am not looking for a “Touch Plate”, but an actual probe that could center the XY axis on the inside or outside of …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":87,"like_count":4,"has_summary":false,"last_poster_username":"HardtailSr","category_id":17,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14709,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Do not wait for spindle to stop","id":38538,"title":"Do not wait for spindle to stop","slug":"do-not-wait-for-spindle-to-stop","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-25T23:49:53.403Z","last_posted_at":"2026-04-25T23:49:53.495Z","bumped":true,"bumped_at":"2026-04-25T23:49:53.495Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"The machine prevents input and waits to execute the final G53 I put there to raise the Z up until the spindle almost stops. I’d like the option not to wait for the spindle for that homing move and also to allow me to jog…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":74,"like_count":1,"has_summary":false,"last_poster_username":"dsunds","category_id":17,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2208,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"G81 Drill Support","id":38537,"title":"G81 Drill Support","slug":"g81-drill-support","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-25T23:46:18.563Z","last_posted_at":"2026-04-25T23:46:18.658Z","bumped":true,"bumped_at":"2026-04-25T23:46:18.658Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Discovered today the Redline doesn’t (yet) support G81. This worked for me on the Buildbotics so I had to change my toolpath to avoid these drill codes. Not urgent but would like to see it in the backlog. Thanks!","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":59,"like_count":1,"has_summary":false,"last_poster_username":"dsunds","category_id":17,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":2208,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Animated preview","id":38529,"title":"Animated preview","slug":"animated-preview","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-25T08:44:41.411Z","last_posted_at":"2026-04-25T08:44:41.503Z","bumped":true,"bumped_at":"2026-04-25T08:44:41.503Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"is it possible to add an animated preview of the file similar to what masso does showing the order it makes the cuts in and the exit and entry lines? \nalso it would be helpful if on the screen when you load a file it isn…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":52,"like_count":0,"has_summary":false,"last_poster_username":"LFwood","category_id":17,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":13458,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline CNC RTS-X Motion Controller feature requests","id":38099,"title":"Redline CNC RTS-X Motion Controller feature requests","slug":"redline-cnc-rts-x-motion-controller-feature-requests","posts_count":15,"reply_count":13,"highest_post_number":15,"image_url":null,"created_at":"2026-04-06T18:44:29.298Z","last_posted_at":"2026-04-17T20:46:19.998Z","bumped":true,"bumped_at":"2026-04-17T20:46:19.998Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Just “upgraded” from Masso to Redline controller on my 1F Elite Woodworker Gen 1. So far, I like the new controller’s simplicity, integration, simple intuitive interface and the ability to use customized macros. However,…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":189,"like_count":14,"has_summary":false,"last_poster_username":"LFwood","category_id":17,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":11772,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":14085,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13458,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Putting T command and M06 Command on separate lines","id":38172,"title":"Putting T command and M06 Command on separate lines","slug":"putting-t-command-and-m06-command-on-separate-lines","posts_count":6,"reply_count":2,"highest_post_number":6,"image_url":null,"created_at":"2026-04-14T18:41:23.151Z","last_posted_at":"2026-04-16T23:38:52.303Z","bumped":true,"bumped_at":"2026-04-16T23:38:52.303Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"It is now 4/14 and I am on redline 1.4.18 and I still have to edit every g-code file I create, or the controller has to be rebooted. Am I missing something? Is this not an issue and I just don’t see the fix?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":101,"like_count":6,"has_summary":false,"last_poster_username":"TMToronto","category_id":17,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3786,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13458,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Realtime Resources (FAQ)","id":38195,"title":"Realtime Resources (FAQ)","slug":"realtime-resources-faq","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-04-16T20:22:33.150Z","last_posted_at":"2026-04-16T20:22:33.264Z","bumped":true,"bumped_at":"2026-04-16T20:22:33.264Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Realtime Resources: \nNews: RealTime CNC News - RealTime CNC \nProduct Specs: Product Specs - RealTime CNC \nDownloads (Firmware & Updates for Redline HMI and Windows/Mac/Linux) software:Downloads - RealTime CNC \nDocumentat…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":65,"like_count":1,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":213,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Offsets don’t change when called in g-code","id":38044,"title":"Offsets don't change when called in g-code","slug":"offsets-dont-change-when-called-in-g-code","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-04-01T01:13:03.276Z","last_posted_at":"2026-04-16T16:59:12.003Z","bumped":true,"bumped_at":"2026-04-16T16:59:12.003Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Calling offsets doesn’t seem to actually work through the code without manually switching over in the Offsets panel in the RTS-X program. \nFor example, working in program 1 using G54 works fine, then I go to program 2 wh…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":67,"like_count":1,"has_summary":false,"last_poster_username":"LFwood","category_id":17,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":5615,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13458,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Redline pendant","id":36602,"title":"Redline pendant","slug":"redline-pendant","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2025-11-23T18:21:18.984Z","last_posted_at":"2026-04-15T12:11:57.367Z","bumped":true,"bumped_at":"2026-04-15T12:11:57.367Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I would like to see the ability to use a pendant with the new Redline controller.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":237,"like_count":10,"has_summary":false,"last_poster_username":"pwpacp","category_id":17,"op_like_count":4,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10691,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13188,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":631,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Vcarve file issue","id":38138,"title":"Vcarve file issue","slug":"vcarve-file-issue","posts_count":6,"reply_count":4,"highest_post_number":6,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/3/8/3803a9c55df2c1fe35f292dee589dd23180790e8_2_768x1024.jpeg","created_at":"2026-04-10T17:39:36.849Z","last_posted_at":"2026-04-10T19:03:07.435Z","bumped":true,"bumped_at":"2026-04-10T19:03:07.435Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just finished setting up my 1f journeyman w/redline spindle and controller. I created a file in vcarve pro to flatten the surface. Loading the file I get a error line 3. I’ve attached a picture of what comes up. I r…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":67,"like_count":1,"has_summary":false,"last_poster_username":"WayneP","category_id":210,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":9240,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]}]}}