# RealTime Controller (RTCNC) **URL:** https://forum.onefinitycnc.com/c/rtcnc-controller/209.md [Latest](https://forum.onefinitycnc.com/latest.md) · [Categories](https://forum.onefinitycnc.com/categories.md) --- ## [About the RealTime Controller (RTCNC) category](https://forum.onefinitycnc.com/t/about-the-realtime-controller-rtcnc-category/38190)
**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Replies:** 0\ **Last updated:** [April 16, 2026, 7:58pm UTC](https://forum.onefinitycnc.com/t/about-the-realtime-controller-rtcnc-category/38190 "2026-04-16T19:58:50Z")
Discussion of the RTCNC Controller (Realtime CNC) use with Gen 2 machines, apprentice, and Redline HMI. --- ## [Delete files in wem interface](https://forum.onefinitycnc.com/t/delete-files-in-wem-interface/40388)
**Author:** [@calbert](https://forum.onefinitycnc.com/u/calbert)\ **Replies:** 1\ **Last updated:** [October 23, 2026, 4:31am UTC](https://forum.onefinitycnc.com/t/delete-files-in-wem-interface/40388 "2026-10-23T04:31:10Z")
When I run the web interface I do not see an option to delete files. --- ## [Can you load files remotely on Redline Controller?](https://forum.onefinitycnc.com/t/can-you-load-files-remotely-on-redline-controller/36639)
**Author:** [@ds53652](https://forum.onefinitycnc.com/u/ds53652)\ **Replies:** 6\ **Last updated:** [October 21, 2026, 4:36pm UTC](https://forum.onefinitycnc.com/t/can-you-load-files-remotely-on-redline-controller/36639 "2026-10-21T16:36:49Z")
Can you load files remotely onto Redline Controller? Like from a laptop, over the network? I do this on my BB controller and I don’t want to have to start loading files via a USB stick. --- ## [Stuck in buffering](https://forum.onefinitycnc.com/t/stuck-in-buffering/40368)
**Author:** [@Mator](https://forum.onefinitycnc.com/u/Mator)\ **Replies:** 0\ **Last updated:** [October 14, 2026, 3:10pm UTC](https://forum.onefinitycnc.com/t/stuck-in-buffering/40368 "2026-10-14T15:10:23Z")
Hey guys. New to this forum. I’ve had my elite gen 2 for a few months now. Running it from a laptop with realtime cnc and using a makita router for a spindle. I’ve had issues a few times with it just getting stuck buffer… --- ## [Network IOT with redline HMI?](https://forum.onefinitycnc.com/t/network-iot-with-redline-hmi/40311)
**Author:** [@pocketsfullofsawdust](https://forum.onefinitycnc.com/u/pocketsfullofsawdust)\ **Replies:** 7\ **Last updated:** [October 11, 2026, 5:39pm UTC](https://forum.onefinitycnc.com/t/network-iot-with-redline-hmi/40311 "2026-10-11T17:39:10Z")
The dust collector in my shop is accessible over the network that I connected my redline HMI with WiFi. Is it possible to have the redline HMI publish to MQTT or make an HTTP request to turn on and off accessories? I saw… --- ## [Redline Feature Request: Tool Time Counter](https://forum.onefinitycnc.com/t/redline-feature-request-tool-time-counter/40293)
**Author:** [@SCSailor](https://forum.onefinitycnc.com/u/SCSailor)\ **Replies:** 0\ **Last updated:** [October 1, 2026, 8:35pm UTC](https://forum.onefinitycnc.com/t/redline-feature-request-tool-time-counter/40293 "2026-10-01T20:35:06Z")
I have a few bits that get used at a much higher rate than the rest of my bits (i.e. 1/4 end mills). I spend a lot of time wondering when to change the bits out. They are expensive so I don’t want to change them out earl… --- ## [Wireless Joystick and Redline controller](https://forum.onefinitycnc.com/t/wireless-joystick-and-redline-controller/38033)
**Author:** [@tjp52](https://forum.onefinitycnc.com/u/tjp52)\ **Replies:** 40\ **Last updated:** [September 26, 2026, 5:19pm UTC](https://forum.onefinitycnc.com/t/wireless-joystick-and-redline-controller/38033 "2026-09-26T17:19:44Z")
Has anyone gotten the official Onefinity wireless gamepad to work with RedLine? I have tried numerous attempts, same result. It just fails to detect and fails to work. When the machine boots I receive these errors whi… --- ## [Post Processor Help](https://forum.onefinitycnc.com/t/post-processor-help/40172)
**Author:** [@evanhawkins04](https://forum.onefinitycnc.com/u/evanhawkins04)\ **Replies:** 3\ **Last updated:** [September 15, 2026, 8:33pm UTC](https://forum.onefinitycnc.com/t/post-processor-help/40172 "2026-09-15T20:33:13Z")
I constantly have to go into my g-code and modify a few things to get it to run good but I’m getting sick of that. what post processor do i use for a gen 2 elite Forman with ATC, where do I download it? --- ## [G92 Problem, a Little Help?](https://forum.onefinitycnc.com/t/g92-problem-a-little-help/40116)
**Author:** [@SailorMike](https://forum.onefinitycnc.com/u/SailorMike)\ **Replies:** 12\ **Last updated:** [September 14, 2026, 1:14am UTC](https://forum.onefinitycnc.com/t/g92-problem-a-little-help/40116 "2026-09-14T01:14:47Z")
Redline controller Gen 2, V1.6.3 I wrote a little macro to set the Z Zero for my pen plotter. Here it is in its entirety: G53G0Z-5.8 G92Z0 It runs, the Z descends to machine Z-5.8 and the work Z sets to 0, but then i… --- ## [Add G92 to firmware to Redline controller (Solved - Added!)](https://forum.onefinitycnc.com/t/add-g92-to-firmware-to-redline-controller-solved-added/36780)
**Author:** [@tgunr](https://forum.onefinitycnc.com/u/tgunr)\ **Replies:** 11\ **Last updated:** [September 10, 2026, 12:32pm UTC](https://forum.onefinitycnc.com/t/add-g92-to-firmware-to-redline-controller-solved-added/36780 "2026-09-10T12:32:46Z")
Please support G92 command. --- ## [Feature Request: Add 3D probing and G38.2 g-code support](https://forum.onefinitycnc.com/t/feature-request-add-3d-probing-and-g38-2-g-code-support/40049)
**Author:** [@dotyman](https://forum.onefinitycnc.com/u/dotyman)\ **Replies:** 8\ **Last updated:** [August 31, 2026, 4:23pm UTC](https://forum.onefinitycnc.com/t/feature-request-add-3d-probing-and-g38-2-g-code-support/40049 "2026-08-31T16:23:47Z")
Please add the ability to use a 3D digital touch probe (not a plate) and G38.2 g-code capabilities to the Redline CNC controller soon. I found it very useful on my old MASSO controller and it seems like a common, basic f… --- ## [Redline / J-tech Laser Issue (Solved, Post processor issue)](https://forum.onefinitycnc.com/t/redline-j-tech-laser-issue-solved-post-processor-issue/39509)
**Author:** [@Thomasaburt](https://forum.onefinitycnc.com/u/Thomasaburt)\ **Replies:** 10\ **Last updated:** [August 22, 2026, 12:28am UTC](https://forum.onefinitycnc.com/t/redline-j-tech-laser-issue-solved-post-processor-issue/39509 "2026-08-22T00:28:51Z")
I recently upgraded from my original Buildbotics Journeyman, which I had for several years, to the Gen2 Foreman w/ Redline controller. I am trying to set up and use my laser for the first time, and I am having problems. … --- ## [Touch Screen Cursor Issue](https://forum.onefinitycnc.com/t/touch-screen-cursor-issue/39349)
**Author:** [@lukeaj](https://forum.onefinitycnc.com/u/lukeaj)\ **Replies:** 3\ **Last updated:** [August 20, 2026, 2:56am UTC](https://forum.onefinitycnc.com/t/touch-screen-cursor-issue/39349 "2026-08-20T02:56:40Z")
On my redline HMI, randomly a mouse cursor appears. Once that happens, if I touch the screen anywhere, the mouse cursor jumps around. If I move my finger on the screen, the mouse moves, but like the screen is landscape i… --- ## [How to LOCK your CNC up in three easy steps](https://forum.onefinitycnc.com/t/how-to-lock-your-cnc-up-in-three-easy-steps/39537)
**Author:** [@tjp52](https://forum.onefinitycnc.com/u/tjp52)\ **Replies:** 2\ **Last updated:** [August 14, 2026, 6:52pm UTC](https://forum.onefinitycnc.com/t/how-to-lock-your-cnc-up-in-three-easy-steps/39537 "2026-08-14T18:52:55Z")
Turn on CNC Tap “Home All” Tap “Jog Home” (Round target in center of jog control) Result: Machine locks up… no further movement can be made. 100% reproducible Environment: HMI Controller FW: 1.6.3 This is not a maj… --- ## [RTS-2 Firmware for HMI and Controller](https://forum.onefinitycnc.com/t/rts-2-firmware-for-hmi-and-controller/39475)
**Author:** [@Andlit](https://forum.onefinitycnc.com/u/Andlit)\ **Replies:** 5\ **Last updated:** [August 7, 2026, 9:15pm UTC](https://forum.onefinitycnc.com/t/rts-2-firmware-for-hmi-and-controller/39475 "2026-08-07T21:15:57Z")
Just to make sure I understand the system correctly. When a firmware update is announced, for example, “RealTime Redline Controller Firmware 1.6.3”, does that mean both the HMI controller (Raspberry Pi) and the hardware … --- ## [Wife very happy with my Redline Update](https://forum.onefinitycnc.com/t/wife-very-happy-with-my-redline-update/39413)
**Author:** [@Woodpecker](https://forum.onefinitycnc.com/u/Woodpecker)\ **Replies:** 3\ **Last updated:** [July 27, 2026, 10:00pm UTC](https://forum.onefinitycnc.com/t/wife-very-happy-with-my-redline-update/39413 "2026-07-27T22:00:32Z")
Been lurking around for a long time now I am Elite Foreman Gen1 Masso guy from Day 1.. Masso was ok But the most important feature I think is the override feed rate and spindle speed. Waited for over two years to get t… --- ## [Gen2 with Redline Controller Units of measure](https://forum.onefinitycnc.com/t/gen2-with-redline-controller-units-of-measure/39399)
**Author:** [@Tazmo](https://forum.onefinitycnc.com/u/Tazmo)\ **Replies:** 3\ **Last updated:** [July 26, 2026, 3:51pm UTC](https://forum.onefinitycnc.com/t/gen2-with-redline-controller-units-of-measure/39399 "2026-07-26T15:51:54Z")
I have set my startup units of measure to “Imperial”, but everytime I startup my machine, it reverts back to “Metric”. My files are all designed in VCarve Pro and I use “Imperial” for my measurements. This is frustrati… --- ## [Redline Controller missing options](https://forum.onefinitycnc.com/t/redline-controller-missing-options/39394)
**Author:** [@Andlit](https://forum.onefinitycnc.com/u/Andlit)\ **Replies:** 3\ **Last updated:** [July 25, 2026, 4:58am UTC](https://forum.onefinitycnc.com/t/redline-controller-missing-options/39394 "2026-07-25T04:58:10Z")
The new Redline Controller firmware 1.6.3 finally enables some important options. Among other things, it includes input signal inversion and infrastructure to support accessories—whatever that means. I haven’t tried it y… --- ## [HMI Locks Up When Connecting via WiFi](https://forum.onefinitycnc.com/t/hmi-locks-up-when-connecting-via-wifi/39343)
**Author:** [@LoLo\_World](https://forum.onefinitycnc.com/u/LoLo_World)\ **Replies:** 6\ **Last updated:** [July 20, 2026, 3:55pm UTC](https://forum.onefinitycnc.com/t/hmi-locks-up-when-connecting-via-wifi/39343 "2026-07-20T15:55:38Z")
I’m curious if anyone else has experienced this issue or has found a solution. The machine completely locks up whenever I attempt to connect to it via WiFi from my phone or laptop. The machine becomes unresponsive and r… --- ## [Resume a job after ATC bit change failure](https://forum.onefinitycnc.com/t/resume-a-job-after-atc-bit-change-failure/39301)
**Author:** [@peeceejay](https://forum.onefinitycnc.com/u/peeceejay)\ **Replies:** 8\ **Last updated:** [July 18, 2026, 2:17pm UTC](https://forum.onefinitycnc.com/t/resume-a-job-after-atc-bit-change-failure/39301 "2026-07-18T14:17:56Z")
Every now and then, my ATC won’t pick up a bit during a change. It’s not consistent - many times it’ll work fine, but every now and then, it’ll try to pick up a new collet, and I can see it spinning, I can see it pressi… --- ## [New Feature for the File Manager of the RTS-X Web Interface](https://forum.onefinitycnc.com/t/new-feature-for-the-file-manager-of-the-rts-x-web-interface/39187)
**Author:** [@umfan284](https://forum.onefinitycnc.com/u/umfan284)\ **Replies:** 0\ **Last updated:** [June 23, 2026, 7:33pm UTC](https://forum.onefinitycnc.com/t/new-feature-for-the-file-manager-of-the-rts-x-web-interface/39187 "2026-06-23T19:33:49Z")
It’d be awesome if the RTS-X File Upload part of the Dashboard had the capability to click on multiple toolpaths to move them into a folder, just like you can do in the File Explorer of Windows. --- ## [Hybrid ATC/Manual Tool Change](https://forum.onefinitycnc.com/t/hybrid-atc-manual-tool-change/38613)
**Author:** [@SamuelBarker](https://forum.onefinitycnc.com/u/SamuelBarker)\ **Replies:** 1\ **Last updated:** [June 22, 2026, 7:00pm UTC](https://forum.onefinitycnc.com/t/hybrid-atc-manual-tool-change/38613 "2026-06-22T19:00:45Z")
When a tool is commanded that is not loaded in the ATC while in automatic tool change mode the program fails. This is detailed here: Easy ATC Software Beta for Realtime Controller (Official FAQ) - #27 by enyegaard . De… --- ## [Latest Hotfix Now Supports Logitech F310 Game Controller](https://forum.onefinitycnc.com/t/latest-hotfix-now-supports-logitech-f310-game-controller/39163)
**Author:** [@dwhite1031](https://forum.onefinitycnc.com/u/dwhite1031)\ **Replies:** 0\ **Last updated:** [June 18, 2026, 7:53pm UTC](https://forum.onefinitycnc.com/t/latest-hotfix-now-supports-logitech-f310-game-controller/39163 "2026-06-18T19:53:26Z")
Software Version 1.5.14 (Hotfix Release) fixes a bug with Linux and the Logitech F310 game controller. Tested mine today and the controller is fully functional. Nice to have in addition to the original game controllers… --- ## [About that Confirm Popup on Redline Controller](https://forum.onefinitycnc.com/t/about-that-confirm-popup-on-redline-controller/39144)
**Author:** [@phsteddi](https://forum.onefinitycnc.com/u/phsteddi)\ **Replies:** 0\ **Last updated:** [June 17, 2026, 1:20am UTC](https://forum.onefinitycnc.com/t/about-that-confirm-popup-on-redline-controller/39144 "2026-06-17T01:20:40Z")
Onefinity or Redline team, Any chance you can raise the location of the Confirm Yes/No Popup? For me I sometimes fail to see it as it’s right in the middle of the screen and the color blends in with the blue of the dir… --- ## [Manual Tool Change Problems](https://forum.onefinitycnc.com/t/manual-tool-change-problems/38912)
**Author:** [@Charlie\_Delta](https://forum.onefinitycnc.com/u/Charlie_Delta)\ **Replies:** 1\ **Last updated:** [June 8, 2026, 12:19am UTC](https://forum.onefinitycnc.com/t/manual-tool-change-problems/38912 "2026-06-08T00:19:28Z")
I am new to CNC. I have an apprentice with redline controller, HMI, and 65mm spindle. I am using Carveco. I have created a toolpath with multiple bits, I have remembered to number the different bits so I can save all the… --- ## [Redline HMI update issue?](https://forum.onefinitycnc.com/t/redline-hmi-update-issue/38889)
**Author:** [@SteveDT](https://forum.onefinitycnc.com/u/SteveDT)\ **Replies:** 5\ **Last updated:** [June 5, 2026, 1:18pm UTC](https://forum.onefinitycnc.com/t/redline-hmi-update-issue/38889 "2026-06-05T13:18:32Z")
So, I have a Gen 2 OneFinity Journeyman with a Redline HMI. I checked today and found there was a zillion gig update. Downloaded the update and all seemed fine until this point shown in the image,. This has been stuck on… --- ## [New Taskbar Icon descriptions for Realtime controller firmware 1.5.9+ (FAQ)](https://forum.onefinitycnc.com/t/new-taskbar-icon-descriptions-for-realtime-controller-firmware-1-5-9-faq/38879)
**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Replies:** 0\ **Last updated:** [June 4, 2026, 4:35pm UTC](https://forum.onefinitycnc.com/t/new-taskbar-icon-descriptions-for-realtime-controller-firmware-1-5-9-faq/38879 "2026-06-04T16:35:30Z")
New Taskbar Icon descriptions for Realtime controller firmware 1.5.9+ --- ## [RTS-X Now Supports Logitech F310 game controller](https://forum.onefinitycnc.com/t/rts-x-now-supports-logitech-f310-game-controller/38815)
**Author:** [@dwhite1031](https://forum.onefinitycnc.com/u/dwhite1031)\ **Replies:** 2\ **Last updated:** [May 31, 2026, 7:24pm UTC](https://forum.onefinitycnc.com/t/rts-x-now-supports-logitech-f310-game-controller/38815 "2026-05-31T19:24:48Z")
The latest firmware update documentation states that version 1.5.9 (released 6-22-2026) has added support for the Logitech F310 game controller. Good to know since the EasySMX ESM-9013 wired game controller has been dis… --- ## [Feature/UX Issue: No automatic UI response on M6 tool change command](https://forum.onefinitycnc.com/t/feature-ux-issue-no-automatic-ui-response-on-m6-tool-change-command/37901)
**Author:** [@HgR](https://forum.onefinitycnc.com/u/HgR)\ **Replies:** 5\ **Last updated:** [May 30, 2026, 8:29pm UTC](https://forum.onefinitycnc.com/t/feature-ux-issue-no-automatic-ui-response-on-m6-tool-change-command/37901 "2026-05-30T20:29:04Z")
I’m running a Onefinity Elite Gen 1 Foreman (48"x48") with a Redline controller on firmware 1.4.9, and I’d like to report what I believe is a UX issue with the M6 tool change handling. CURRENT BEHAVIOR When the control… --- ## [Feature request: Spindle load while cutting](https://forum.onefinitycnc.com/t/feature-request-spindle-load-while-cutting/38828)
**Author:** [@LFwood](https://forum.onefinitycnc.com/u/LFwood)\ **Replies:** 0\ **Last updated:** [May 28, 2026, 6:09pm UTC](https://forum.onefinitycnc.com/t/feature-request-spindle-load-while-cutting/38828 "2026-05-28T18:09:03Z")
One feature that would be great is to see what the spindle load is while cutting. I know you can go back to the home screen to check but having a readout in the cut screen would help so you know if you have room to adjus… [Next page](https://forum.onefinitycnc.com/c/rtcnc-controller/209.md?page=1)