# Feature Request **URL:** https://forum.onefinitycnc.com/c/rtcnc-controller/software/17.md [Latest](https://forum.onefinitycnc.com/latest.md) · [Categories](https://forum.onefinitycnc.com/categories.md) --- ## [About the Feature Request category](https://forum.onefinitycnc.com/t/about-the-feature-request-category/26)
**Author:** [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Replies:** 0\ **Last updated:** [June 24, 2020, 12:46am UTC](https://forum.onefinitycnc.com/t/about-the-feature-request-category/26 "2020-06-24T00:46:42Z")
Feature requests for the RealTime CNC Controller. --- ## [Network IOT with redline HMI?](https://forum.onefinitycnc.com/t/network-iot-with-redline-hmi/40311)
**Author:** [@pocketsfullofsawdust](https://forum.onefinitycnc.com/u/pocketsfullofsawdust)\ **Replies:** 8\ **Last updated:** [October 29, 2026, 7:24pm UTC](https://forum.onefinitycnc.com/t/network-iot-with-redline-hmi/40311 "2026-10-29T19:24:08Z")
The dust collector in my shop is accessible over the network that I connected my redline HMI with WiFi. Is it possible to have the redline HMI publish to MQTT or make an HTTP request to turn on and off accessories? I saw… --- ## [Can you load files remotely on Redline Controller?](https://forum.onefinitycnc.com/t/can-you-load-files-remotely-on-redline-controller/36639)
**Author:** [@ds53652](https://forum.onefinitycnc.com/u/ds53652)\ **Replies:** 6\ **Last updated:** [October 21, 2026, 4:36pm UTC](https://forum.onefinitycnc.com/t/can-you-load-files-remotely-on-redline-controller/36639 "2026-10-21T16:36:49Z")
Can you load files remotely onto Redline Controller? Like from a laptop, over the network? I do this on my BB controller and I don’t want to have to start loading files via a USB stick. --- ## [Redline Feature Request: Tool Time Counter](https://forum.onefinitycnc.com/t/redline-feature-request-tool-time-counter/40293)
**Author:** [@SCSailor](https://forum.onefinitycnc.com/u/SCSailor)\ **Replies:** 0\ **Last updated:** [October 1, 2026, 8:35pm UTC](https://forum.onefinitycnc.com/t/redline-feature-request-tool-time-counter/40293 "2026-10-01T20:35:06Z")
I have a few bits that get used at a much higher rate than the rest of my bits (i.e. 1/4 end mills). I spend a lot of time wondering when to change the bits out. They are expensive so I don’t want to change them out earl… --- ## [Add G92 to firmware to Redline controller (Solved - Added!)](https://forum.onefinitycnc.com/t/add-g92-to-firmware-to-redline-controller-solved-added/36780)
**Author:** [@tgunr](https://forum.onefinitycnc.com/u/tgunr)\ **Replies:** 11\ **Last updated:** [September 10, 2026, 12:32pm UTC](https://forum.onefinitycnc.com/t/add-g92-to-firmware-to-redline-controller-solved-added/36780 "2026-09-10T12:32:46Z")
Please support G92 command. --- ## [Feature Request: Add 3D probing and G38.2 g-code support](https://forum.onefinitycnc.com/t/feature-request-add-3d-probing-and-g38-2-g-code-support/40049)
**Author:** [@dotyman](https://forum.onefinitycnc.com/u/dotyman)\ **Replies:** 8\ **Last updated:** [August 31, 2026, 4:23pm UTC](https://forum.onefinitycnc.com/t/feature-request-add-3d-probing-and-g38-2-g-code-support/40049 "2026-08-31T16:23:47Z")
Please add the ability to use a 3D digital touch probe (not a plate) and G38.2 g-code capabilities to the Redline CNC controller soon. I found it very useful on my old MASSO controller and it seems like a common, basic f… --- ## [Redline Controller missing options](https://forum.onefinitycnc.com/t/redline-controller-missing-options/39394)
**Author:** [@Andlit](https://forum.onefinitycnc.com/u/Andlit)\ **Replies:** 3\ **Last updated:** [July 25, 2026, 4:58am UTC](https://forum.onefinitycnc.com/t/redline-controller-missing-options/39394 "2026-07-25T04:58:10Z")
The new Redline Controller firmware 1.6.3 finally enables some important options. Among other things, it includes input signal inversion and infrastructure to support accessories—whatever that means. I haven’t tried it y… --- ## [Resume a job after ATC bit change failure](https://forum.onefinitycnc.com/t/resume-a-job-after-atc-bit-change-failure/39301)
**Author:** [@peeceejay](https://forum.onefinitycnc.com/u/peeceejay)\ **Replies:** 8\ **Last updated:** [July 18, 2026, 2:17pm UTC](https://forum.onefinitycnc.com/t/resume-a-job-after-atc-bit-change-failure/39301 "2026-07-18T14:17:56Z")
Every now and then, my ATC won’t pick up a bit during a change. It’s not consistent - many times it’ll work fine, but every now and then, it’ll try to pick up a new collet, and I can see it spinning, I can see it pressi… --- ## [New Feature for the File Manager of the RTS-X Web Interface](https://forum.onefinitycnc.com/t/new-feature-for-the-file-manager-of-the-rts-x-web-interface/39187)
**Author:** [@umfan284](https://forum.onefinitycnc.com/u/umfan284)\ **Replies:** 0\ **Last updated:** [June 23, 2026, 7:33pm UTC](https://forum.onefinitycnc.com/t/new-feature-for-the-file-manager-of-the-rts-x-web-interface/39187 "2026-06-23T19:33:49Z")
It’d be awesome if the RTS-X File Upload part of the Dashboard had the capability to click on multiple toolpaths to move them into a folder, just like you can do in the File Explorer of Windows. --- ## [Hybrid ATC/Manual Tool Change](https://forum.onefinitycnc.com/t/hybrid-atc-manual-tool-change/38613)
**Author:** [@SamuelBarker](https://forum.onefinitycnc.com/u/SamuelBarker)\ **Replies:** 1\ **Last updated:** [June 22, 2026, 7:00pm UTC](https://forum.onefinitycnc.com/t/hybrid-atc-manual-tool-change/38613 "2026-06-22T19:00:45Z")
When a tool is commanded that is not loaded in the ATC while in automatic tool change mode the program fails. This is detailed here: Easy ATC Software Beta for Realtime Controller (Official FAQ) - #27 by enyegaard . De… --- ## [About that Confirm Popup on Redline Controller](https://forum.onefinitycnc.com/t/about-that-confirm-popup-on-redline-controller/39144)
**Author:** [@phsteddi](https://forum.onefinitycnc.com/u/phsteddi)\ **Replies:** 0\ **Last updated:** [June 17, 2026, 1:20am UTC](https://forum.onefinitycnc.com/t/about-that-confirm-popup-on-redline-controller/39144 "2026-06-17T01:20:40Z")
Onefinity or Redline team, Any chance you can raise the location of the Confirm Yes/No Popup? For me I sometimes fail to see it as it’s right in the middle of the screen and the color blends in with the blue of the dir… --- ## [Feature/UX Issue: No automatic UI response on M6 tool change command](https://forum.onefinitycnc.com/t/feature-ux-issue-no-automatic-ui-response-on-m6-tool-change-command/37901)
**Author:** [@HgR](https://forum.onefinitycnc.com/u/HgR)\ **Replies:** 5\ **Last updated:** [May 30, 2026, 8:29pm UTC](https://forum.onefinitycnc.com/t/feature-ux-issue-no-automatic-ui-response-on-m6-tool-change-command/37901 "2026-05-30T20:29:04Z")
I’m running a Onefinity Elite Gen 1 Foreman (48"x48") with a Redline controller on firmware 1.4.9, and I’d like to report what I believe is a UX issue with the M6 tool change handling. CURRENT BEHAVIOR When the control… --- ## [Feature request: Spindle load while cutting](https://forum.onefinitycnc.com/t/feature-request-spindle-load-while-cutting/38828)
**Author:** [@LFwood](https://forum.onefinitycnc.com/u/LFwood)\ **Replies:** 0\ **Last updated:** [May 28, 2026, 6:09pm UTC](https://forum.onefinitycnc.com/t/feature-request-spindle-load-while-cutting/38828 "2026-05-28T18:09:03Z")
One feature that would be great is to see what the spindle load is while cutting. I know you can go back to the home screen to check but having a readout in the cut screen would help so you know if you have room to adjus… --- ## [Lightburn, Redline Controller and Camera support](https://forum.onefinitycnc.com/t/lightburn-redline-controller-and-camera-support/38816)
**Author:** [@SailorMike](https://forum.onefinitycnc.com/u/SailorMike)\ **Replies:** 0\ **Last updated:** [May 26, 2026, 8:57pm UTC](https://forum.onefinitycnc.com/t/lightburn-redline-controller-and-camera-support/38816 "2026-05-26T20:57:44Z")
I’m currently exploring the capabilities of Lightburn. I learned from this post that the Redline controller supports a USB camera. Has anyone attempted to use this setup to utilize the camera features in Lightburn, or is… --- ## [Ability to change/modify/customize the Gamepad Controller button assignments](https://forum.onefinitycnc.com/t/ability-to-change-modify-customize-the-gamepad-controller-button-assignments/38571)
**Author:** [@ds53652](https://forum.onefinitycnc.com/u/ds53652)\ **Replies:** 1\ **Last updated:** [April 30, 2026, 5:22pm UTC](https://forum.onefinitycnc.com/t/ability-to-change-modify-customize-the-gamepad-controller-button-assignments/38571 "2026-04-30T17:22:57Z")
Can we add the ability to change/modify/customize the Gamepad Controller button assignments? Coming from the Buildbotics platform, I really liked being able to change the 4 movement speeds right on the gamepad controll… --- ## [Home machine prompt upon bootup, like Buildbotics did](https://forum.onefinitycnc.com/t/home-machine-prompt-upon-bootup-like-buildbotics-did/38570)
**Author:** [@ds53652](https://forum.onefinitycnc.com/u/ds53652)\ **Replies:** 0\ **Last updated:** [April 29, 2026, 10:12pm UTC](https://forum.onefinitycnc.com/t/home-machine-prompt-upon-bootup-like-buildbotics-did/38570 "2026-04-29T22:12:34Z")
Can we make it so that upon bootup, the machine prompts you to Home the machine, just like it did on the Buildbotics controller? --- ## [Is there a 3D Touch Probe Available to Work with Redline Controller](https://forum.onefinitycnc.com/t/is-there-a-3d-touch-probe-available-to-work-with-redline-controller/38541)
**Author:** [@Tazmo](https://forum.onefinitycnc.com/u/Tazmo)\ **Replies:** 2\ **Last updated:** [April 26, 2026, 3:24pm UTC](https://forum.onefinitycnc.com/t/is-there-a-3d-touch-probe-available-to-work-with-redline-controller/38541 "2026-04-26T15:24:20Z")
It would be really nice if there were a 3D touch probe that could be used with the Redline Controller. I am not looking for a “Touch Plate”, but an actual probe that could center the XY axis on the inside or outside of … --- ## [Do not wait for spindle to stop](https://forum.onefinitycnc.com/t/do-not-wait-for-spindle-to-stop/38538)
**Author:** [@dsunds](https://forum.onefinitycnc.com/u/dsunds)\ **Replies:** 0\ **Last updated:** [April 25, 2026, 11:49pm UTC](https://forum.onefinitycnc.com/t/do-not-wait-for-spindle-to-stop/38538 "2026-04-25T23:49:53Z")
The machine prevents input and waits to execute the final G53 I put there to raise the Z up until the spindle almost stops. I’d like the option not to wait for the spindle for that homing move and also to allow me to jog… --- ## [G81 Drill Support](https://forum.onefinitycnc.com/t/g81-drill-support/38537)
**Author:** [@dsunds](https://forum.onefinitycnc.com/u/dsunds)\ **Replies:** 0\ **Last updated:** [April 25, 2026, 11:46pm UTC](https://forum.onefinitycnc.com/t/g81-drill-support/38537 "2026-04-25T23:46:18Z")
Discovered today the Redline doesn’t (yet) support G81. This worked for me on the Buildbotics so I had to change my toolpath to avoid these drill codes. Not urgent but would like to see it in the backlog. Thanks! --- ## [Animated preview](https://forum.onefinitycnc.com/t/animated-preview/38529)
**Author:** [@LFwood](https://forum.onefinitycnc.com/u/LFwood)\ **Replies:** 0\ **Last updated:** [April 25, 2026, 8:44am UTC](https://forum.onefinitycnc.com/t/animated-preview/38529 "2026-04-25T08:44:41Z")
is it possible to add an animated preview of the file similar to what masso does showing the order it makes the cuts in and the exit and entry lines? also it would be helpful if on the screen when you load a file it isn… --- ## [Redline CNC RTS-X Motion Controller feature requests](https://forum.onefinitycnc.com/t/redline-cnc-rts-x-motion-controller-feature-requests/38099)
**Author:** [@dotyman](https://forum.onefinitycnc.com/u/dotyman)\ **Replies:** 14\ **Last updated:** [April 17, 2026, 8:46pm UTC](https://forum.onefinitycnc.com/t/redline-cnc-rts-x-motion-controller-feature-requests/38099 "2026-04-17T20:46:19Z")
Just “upgraded” from Masso to Redline controller on my 1F Elite Woodworker Gen 1. So far, I like the new controller’s simplicity, integration, simple intuitive interface and the ability to use customized macros. However,… --- ## [Putting T command and M06 Command on separate lines](https://forum.onefinitycnc.com/t/putting-t-command-and-m06-command-on-separate-lines/38172)
**Author:** [@jhagle](https://forum.onefinitycnc.com/u/jhagle)\ **Replies:** 5\ **Last updated:** [April 16, 2026, 11:38pm UTC](https://forum.onefinitycnc.com/t/putting-t-command-and-m06-command-on-separate-lines/38172 "2026-04-16T23:38:52Z")
It is now 4/14 and I am on redline 1.4.18 and I still have to edit every g-code file I create, or the controller has to be rebooted. Am I missing something? Is this not an issue and I just don’t see the fix? --- ## [Offsets don't change when called in g-code](https://forum.onefinitycnc.com/t/offsets-dont-change-when-called-in-g-code/38044)
**Author:** [@Bork](https://forum.onefinitycnc.com/u/Bork)\ **Replies:** 1\ **Last updated:** [April 16, 2026, 4:59pm UTC](https://forum.onefinitycnc.com/t/offsets-dont-change-when-called-in-g-code/38044 "2026-04-16T16:59:12Z")
Calling offsets doesn’t seem to actually work through the code without manually switching over in the Offsets panel in the RTS-X program. For example, working in program 1 using G54 works fine, then I go to program 2 wh… --- ## [Redline pendant](https://forum.onefinitycnc.com/t/redline-pendant/36602)
**Author:** [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\ **Replies:** 4\ **Last updated:** [April 15, 2026, 12:11pm UTC](https://forum.onefinitycnc.com/t/redline-pendant/36602 "2026-04-15T12:11:57Z")
I would like to see the ability to use a pendant with the new Redline controller. --- ## [Please support M0 (MSG, text)](https://forum.onefinitycnc.com/t/please-support-m0-msg-text/36791)
**Author:** [@tgunr](https://forum.onefinitycnc.com/u/tgunr)\ **Replies:** 1\ **Last updated:** [April 7, 2026, 8:57pm UTC](https://forum.onefinitycnc.com/t/please-support-m0-msg-text/36791 "2026-04-07T20:57:47Z")
Since I see your quoting LinuxCNC you should support as much as BuildBotics did as a minimum. Would be nice to be able to use calls to subroutines, etc. --- ## [Implementation of start program macro, tool change macro and end program macro](https://forum.onefinitycnc.com/t/implementation-of-start-program-macro-tool-change-macro-and-end-program-macro/38104)
**Author:** [@tjp52](https://forum.onefinitycnc.com/u/tjp52)\ **Replies:** 0\ **Last updated:** [April 7, 2026, 8:44pm UTC](https://forum.onefinitycnc.com/t/implementation-of-start-program-macro-tool-change-macro-and-end-program-macro/38104 "2026-04-07T20:44:23Z")
This was a feature that was in the BB controller and one I wish could be implemented in the RedLine controller It consisted of three simple text boxes where the user could create basically a macro that would be executed… --- ## [M8 tied to OUT2](https://forum.onefinitycnc.com/t/m8-tied-to-out2/36121)
**Author:** [@tgunr](https://forum.onefinitycnc.com/u/tgunr)\ **Replies:** 6\ **Last updated:** [April 6, 2026, 5:53pm UTC](https://forum.onefinitycnc.com/t/m8-tied-to-out2/36121 "2026-04-06T17:53:48Z")
Implementing M8 M9 is post processor I see that issuing M8 activates OUT2. I was expecting OUT1 to activate. --- ## [Solid Works Post Processor for Redline Controller](https://forum.onefinitycnc.com/t/solid-works-post-processor-for-redline-controller/38086)
**Author:** [@ahandeman](https://forum.onefinitycnc.com/u/ahandeman)\ **Replies:** 1\ **Last updated:** [April 5, 2026, 9:33pm UTC](https://forum.onefinitycnc.com/t/solid-works-post-processor-for-redline-controller/38086 "2026-04-05T21:33:16Z")
is there post processor for the redline controller that works with solid works? --- ## [Add support for 3D Touch Probe](https://forum.onefinitycnc.com/t/add-support-for-3d-touch-probe/36835)
**Author:** [@coda555](https://forum.onefinitycnc.com/u/coda555)\ **Replies:** 7\ **Last updated:** [April 5, 2026, 1:24am UTC](https://forum.onefinitycnc.com/t/add-support-for-3d-touch-probe/36835 "2026-04-05T01:24:51Z")
Add support for 3D Touch probe to allow for scanning of work surface or duplication of projects. --- ## [Please Add M0 pause](https://forum.onefinitycnc.com/t/please-add-m0-pause/38042)
**Author:** [@Bork](https://forum.onefinitycnc.com/u/Bork)\ **Replies:** 0\ **Last updated:** [April 1, 2026, 1:05am UTC](https://forum.onefinitycnc.com/t/please-add-m0-pause/38042 "2026-04-01T01:05:31Z")
Add M0 Pause. I have many regular programs that require slight setup changes, I would like it all contained in one program where I can resume the program after parking it somewhere. I currently do this with M6 as a worka… [Next page](https://forum.onefinitycnc.com/c/rtcnc-controller/software/17.md?page=1)