{"users":[{"id":14355,"username":"wesharper","name":"Wes Harper","avatar_template":"/user_avatar/forum.onefinitycnc.com/wesharper/{size}/34670_2.png","trust_level":1},{"id":10468,"username":"TommyObar","name":"TObar","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/bcef8e/{size}.png","trust_level":3},{"id":10710,"username":"MikeXYZ","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/mikexyz/{size}/32034_2.png","trust_level":3},{"id":2485,"username":"JimHatch","name":"Jim Hatch","avatar_template":"/user_avatar/forum.onefinitycnc.com/jimhatch/{size}/3928_2.png","trust_level":3},{"id":15579,"username":"CMW","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/4da419/{size}.png","trust_level":1},{"id":3537,"username":"bradleyheathhays","name":"Bradley Hays","avatar_template":"/user_avatar/forum.onefinitycnc.com/bradleyheathhays/{size}/23113_2.png","trust_level":1},{"id":1,"username":"OnefinityCNC","name":"Onefinity CNC Official ✅","avatar_template":"/user_avatar/forum.onefinitycnc.com/onefinitycnc/{size}/7_2.png","admin":true,"trust_level":4},{"id":3171,"username":"WmColl46","name":"William","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/35a633/{size}.png","trust_level":2},{"id":7054,"username":"BillSpencer86","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/ecb155/{size}.png","trust_level":2},{"id":3738,"username":"Echd","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/e/779978/{size}.png","trust_level":2},{"id":8804,"username":"BKurk","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/bkurk/{size}/28084_2.png","trust_level":2},{"id":14709,"username":"Tazmo","name":"Randy Benetti","avatar_template":"/user_avatar/forum.onefinitycnc.com/tazmo/{size}/35210_2.png","trust_level":2},{"id":10698,"username":"Nate2078","name":"Nate","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/n/ba9def/{size}.png","trust_level":2},{"id":9822,"username":"Diesel_ss","name":"Jeff","avatar_template":"/user_avatar/forum.onefinitycnc.com/diesel_ss/{size}/29544_2.png","trust_level":2},{"id":2820,"username":"RexH","name":"Rex A Hanson","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/r/c37758/{size}.png","trust_level":2},{"id":4887,"username":"Arzt","name":"David","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/a/a4c791/{size}.png","trust_level":2},{"id":14566,"username":"wimmdesigns","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/a9adbd/{size}.png","trust_level":1},{"id":1042,"username":"stleroux","name":"Stephane","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/s/34f0e0/{size}.png","trust_level":2},{"id":13399,"username":"L.M","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/l/a87d85/{size}.png","trust_level":3},{"id":11492,"username":"cnc38650","name":"Matt","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/97f17d/{size}.png","trust_level":1},{"id":8369,"username":"moosaes","name":"Moosa","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/4bbf92/{size}.png","trust_level":1},{"id":595,"username":"CandL","name":"Carl and Lynn","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/d26b3c/{size}.png","trust_level":2},{"id":10172,"username":"KnotAproblem","name":"KnotAProblem","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/839c29/{size}.png","trust_level":1},{"id":14796,"username":"SteveDT","name":"Steve","avatar_template":"/user_avatar/forum.onefinitycnc.com/stevedt/{size}/35355_2.png","trust_level":1},{"id":14531,"username":"PD1955","name":"Patrick","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/p/5f9b8f/{size}.png","trust_level":2},{"id":5478,"username":"Samjemb","name":"David S Bunin","avatar_template":"/user_avatar/forum.onefinitycnc.com/samjemb/{size}/26836_2.png","trust_level":2},{"id":9461,"username":"KeithP","name":"Keith Pyefinch","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/85e7bf/{size}.png","trust_level":1},{"id":8534,"username":"Ken5","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/k/f0a364/{size}.png","trust_level":3},{"id":4655,"username":"HardtailSr","name":"robert mainville","avatar_template":"/user_avatar/forum.onefinitycnc.com/hardtailsr/{size}/35326_2.png","trust_level":3},{"id":136,"username":"cyberreefguru","name":"The Guru","avatar_template":"/user_avatar/forum.onefinitycnc.com/cyberreefguru/{size}/27385_2.png","trust_level":2},{"id":8691,"username":"Chrislee","name":"Chris Lee","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/d6d6ee/{size}.png","trust_level":0},{"id":6889,"username":"dumbo","name":"Joergen","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/f4b2a3/{size}.png","trust_level":2},{"id":14798,"username":"Huntibunti","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/h/71e660/{size}.png","trust_level":0},{"id":13985,"username":"EdwardR","name":"Edward","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/e/e0b2c6/{size}.png","trust_level":2},{"id":688,"username":"TMToronto","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/7ea924/{size}.png","trust_level":3},{"id":3616,"username":"tosbo6","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/t/839c29/{size}.png","trust_level":1},{"id":13598,"username":"JimmyBuckets","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/{size}.png","trust_level":3},{"id":12496,"username":"MiniSkateLabs","name":"Don D'Angelo","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/9d8465/{size}.png","trust_level":1},{"id":39,"username":"Barry","name":"Barry Fleming","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/b/958977/{size}.png","trust_level":1},{"id":1565,"username":"alldaysammyj","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/a/ac8455/{size}.png","trust_level":2},{"id":816,"username":"Bear","name":"Gerry","avatar_template":"/user_avatar/forum.onefinitycnc.com/bear/{size}/30015_2.png","trust_level":0},{"id":1624,"username":"Dr-Al","name":"Alex Zeller","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/d/cc9497/{size}.png","trust_level":1},{"id":12452,"username":"joejk","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/aeb1de/{size}.png","trust_level":2},{"id":13122,"username":"cdxjones","name":"Chris","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/8797f3/{size}.png","trust_level":1},{"id":4902,"username":"RandomPoster","name":"Mike","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/r/919ad9/{size}.png","trust_level":2},{"id":14253,"username":"jimmy2","name":null,"avatar_template":"https://avatars.discourse-cdn.com/v4/letter/j/9de053/{size}.png","trust_level":1},{"id":6501,"username":"Discounttoolbox","name":"ROB MEYERS","avatar_template":"/user_avatar/forum.onefinitycnc.com/discounttoolbox/{size}/31115_2.png","trust_level":2},{"id":14255,"username":"edmcgov","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/e/e495f1/{size}.png","trust_level":2},{"id":8145,"username":"Flipdaddy","name":"Bob","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/f/3ab097/{size}.png","trust_level":1},{"id":8590,"username":"Woodpecker","name":"","avatar_template":"/user_avatar/forum.onefinitycnc.com/woodpecker/{size}/27447_2.png","trust_level":2},{"id":1133,"username":"Webb","name":"Jim Webb","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/w/e56c9b/{size}.png","trust_level":2},{"id":1635,"username":"349iq2345","name":"","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/{size}.png","trust_level":0},{"id":3043,"username":"circuitbug","name":"dave","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/c/e9a140/{size}.png","trust_level":1},{"id":690,"username":"MikeH","name":"Michael Hentges","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/m/258eb7/{size}.png","trust_level":2},{"id":10490,"username":"RJensen","name":"Roger Jensen","avatar_template":"https://avatars.discourse-cdn.com/v4/letter/r/71e660/{size}.png","trust_level":2}],"primary_groups":[],"flair_groups":[],"topic_list":{"can_create_topic":false,"more_topics_url":"/c/uncategorized/1?page=1","per_page":30,"topics":[{"fancy_title":"Tool bit lifecycle","id":39286,"title":"Tool bit lifecycle","slug":"tool-bit-lifecycle","posts_count":5,"reply_count":0,"highest_post_number":5,"image_url":null,"created_at":"2026-07-07T13:29:30.305Z","last_posted_at":"2026-07-07T16:59:32.522Z","bumped":true,"bumped_at":"2026-07-07T16:59:32.522Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Being new to the CNC world, I have gotten 4-5 real projects under my belt now. Recently started wondering “How long do tool bits typically last?” and “What do you look for to know a bit is ready to retire?” \n“Most” of wh…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":84,"like_count":6,"has_summary":false,"last_poster_username":"wesharper","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14355,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster, Accepted Answer","user_id":10468,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10710,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":2485,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Small inlay gaps","id":39261,"title":"Small inlay gaps","slug":"small-inlay-gaps","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/2/6/26077e6695f32e3e5bbe61f7cfed5633ee6d8869_2_771x1024.jpeg","created_at":"2026-07-02T16:42:59.377Z","last_posted_at":"2026-07-03T13:41:07.042Z","bumped":true,"bumped_at":"2026-07-03T13:41:07.042Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve been trying my hand at some cnc inlays with mediocre results. The majority of inlay fits perfectly but the detailed sections always seem to have gaps. The file was purchased from broinwood and used the same bits so …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":76,"like_count":2,"has_summary":false,"last_poster_username":"JimHatch","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":15579,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2485,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Y axis twin motor stall current adjustment","id":39175,"title":"Y axis twin motor stall current adjustment","slug":"y-axis-twin-motor-stall-current-adjustment","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-20T20:35:39.069Z","last_posted_at":"2026-06-21T13:21:08.856Z","bumped":true,"bumped_at":"2026-06-21T13:21:08.856Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have a homing issue concerning the Y axis only, and I’m about to start raising the stall current value to see if I can get it worked out. Since the Y axis is controlled by two motors, m1 and m2, do I need to adjust the…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":39,"like_count":0,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3537,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Thread Milling Wood","id":27342,"title":"Thread Milling Wood","slug":"thread-milling-wood","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/2/b/2b91c0241d625b94609d387193aecf811e9e0e7f.jpeg","created_at":"2024-06-04T01:37:58.085Z","last_posted_at":"2026-06-18T23:48:51.008Z","bumped":true,"bumped_at":"2026-06-18T23:48:51.008Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Thought I would take a few days to learn Thread Milling by making some wooden screw caps for my wife’s sewing room. Two weeks later! Success, at least it works. Using V-Carve Pro software. \nStarted by buying from Magnate…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":674,"like_count":16,"has_summary":false,"last_poster_username":"Tazmo","category_id":1,"op_like_count":7,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3171,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":7054,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3738,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8804,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":14709,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Settings for ‘onion skin’ when zeroing Z on bed","id":39096,"title":"Settings for 'onion skin' when zeroing Z on bed","slug":"settings-for-onion-skin-when-zeroing-z-on-bed","posts_count":8,"reply_count":4,"highest_post_number":8,"image_url":null,"created_at":"2026-06-10T20:56:40.312Z","last_posted_at":"2026-06-16T13:06:12.778Z","bumped":true,"bumped_at":"2026-06-16T13:06:12.778Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am using the Airweights vacuum table spoil board and I have my projects set to zero the Z axis on the spoil board to help prevent any damage to the spoil board.  I have been playing around with trying to leave an ‘onio…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":165,"like_count":11,"has_summary":false,"last_poster_username":"RexH","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":10698,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":9822,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10468,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":2820,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Screen blinking","id":39114,"title":"Screen blinking","slug":"screen-blinking","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-06-12T21:56:23.734Z","last_posted_at":"2026-06-12T21:56:23.828Z","bumped":true,"bumped_at":"2026-06-12T21:56:23.828Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"A new (for me) monitor problem appeared this month (4 years with the machine and no changes in electronics for 1.5 years). \nAt random times the screen goes black, while the controller functions without interruption.  The…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":42,"like_count":0,"has_summary":false,"last_poster_username":"Arzt","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":4887,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"3d Riser file Question","id":39102,"title":"3d Riser file Question","slug":"3d-riser-file-question","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-06-12T00:39:57.084Z","last_posted_at":"2026-06-12T00:39:57.164Z","bumped":true,"bumped_at":"2026-06-12T00:39:57.164Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Does the Gen 1 Risers that 3d printed from this site work on the Gen2 forman elite?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":44,"like_count":0,"has_summary":false,"last_poster_username":"wimmdesigns","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":14566,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Z plate question","id":38920,"title":"Z plate question","slug":"z-plate-question","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-06-08T14:53:20.648Z","last_posted_at":"2026-06-08T23:18:08.262Z","bumped":true,"bumped_at":"2026-06-08T23:18:08.262Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I am wondering is there is any other purpose for the 2 slots on the sides of the Z plate other than for attaching the dust boot?","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":79,"like_count":2,"has_summary":false,"last_poster_username":"L.M","category_id":1,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1042,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"For Sale Elite Foreman 48x48 For Sale","id":38847,"title":"For Sale Elite Foreman 48x48 For Sale","slug":"for-sale-elite-foreman-48x48-for-sale","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-31T13:25:40.636Z","last_posted_at":"2026-05-31T13:25:40.728Z","bumped":true,"bumped_at":"2026-05-31T13:25:40.728Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have an Elite Foreman 48x48 with masso controller, redline 80mm spindle, dust boot, touch probe, tool setter and custom made table with drawers, storage and caster wheels that lock. I also have a multitude of bits. I b…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":100,"like_count":0,"has_summary":false,"last_poster_username":"cnc38650","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":11492,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Swapping one Y axis to be used for the other","id":38838,"title":"Swapping one Y axis to be used for the other","slug":"swapping-one-y-axis-to-be-used-for-the-other","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-29T23:33:22.746Z","last_posted_at":"2026-05-29T23:33:22.838Z","bumped":true,"bumped_at":"2026-05-29T23:33:22.838Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"One of my Y axis( one without the drag chain) had issue. Onefinity sent me a replacement Y axis but sent the one with the drag chain. They did say “they are identical and I can just take the drag chain off” \nWhich I thin…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":50,"like_count":0,"has_summary":false,"last_poster_username":"moosaes","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":8369,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"MatchFit dovetail bit","id":38806,"title":"MatchFit dovetail bit","slug":"matchfit-dovetail-bit","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-26T10:57:32.956Z","last_posted_at":"2026-05-26T10:57:33.062Z","bumped":true,"bumped_at":"2026-05-26T10:57:33.062Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have heard rumors that using the MatchFit dovetail bit you can create dovetail joints where both pieces are milled in the XY plane with no or extremely small dogbone. In other words no need to mount one piece verticall…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":61,"like_count":0,"has_summary":false,"last_poster_username":"CandL","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":595,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Homing Crashish","id":38802,"title":"Homing Crashish","slug":"homing-crashish","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-25T19:59:07.093Z","last_posted_at":"2026-05-25T19:59:07.188Z","bumped":true,"bumped_at":"2026-05-25T19:59:07.188Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Does anyone else have an issue with their machine glitching when it gets home and skipping over a little?  Here is a video of the X-axis jumping right at the home location.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":55,"like_count":0,"has_summary":false,"last_poster_username":"KnotAproblem","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":10172,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Gen 2 elite Journeyman new noise (solved)","id":38794,"title":"Gen 2 elite Journeyman new noise (solved)","slug":"gen-2-elite-journeyman-new-noise-solved","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/7/3/731be773c1e1f133fd16c0f886aaf36ccad82ac3_2_1024x576.jpeg","created_at":"2026-05-24T20:09:54.160Z","last_posted_at":"2026-05-24T20:59:24.534Z","bumped":true,"bumped_at":"2026-05-24T20:59:24.534Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve been doing test cuts for a few weeks now and have had my tool setter set up for about as long. When using the tool setter, the speed seems to run pretty fast and actually instills fear of a crash, but no crashes to …","visible":true,"closed":true,"archived":false,"bookmarked":null,"liked":null,"views":55,"like_count":2,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14796,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Test file carves too big","id":38786,"title":"Test file carves too big","slug":"test-file-carves-too-big","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-05-22T21:28:17.086Z","last_posted_at":"2026-05-23T16:43:43.851Z","bumped":true,"bumped_at":"2026-05-23T16:43:43.851Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Hey all, new guy here to these forums. So long story short, (sorry, still a long story) I have an Elite gen 2 Journeyman machine with a Redline HMI. Have had it a few months now and have been learning the machine and sof…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":69,"like_count":4,"has_summary":false,"last_poster_username":"SteveDT","category_id":1,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster, Accepted Answer","user_id":14796,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Australia , anyone?","id":38654,"title":"Australia , anyone?","slug":"australia-anyone","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-05-08T10:36:03.762Z","last_posted_at":"2026-05-19T04:24:23.236Z","bumped":true,"bumped_at":"2026-05-19T04:24:23.236Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"is there anyone  else that has a one finity with 240 spindle in australia","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":66,"like_count":0,"has_summary":false,"last_poster_username":"OnefinityCNC","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":true,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14531,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster, Accepted Answer","user_id":1,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Contour cuts not accurate","id":38720,"title":"Contour cuts not accurate","slug":"contour-cuts-not-accurate","posts_count":5,"reply_count":2,"highest_post_number":5,"image_url":null,"created_at":"2026-05-15T21:39:06.957Z","last_posted_at":"2026-05-16T04:40:29.920Z","bumped":true,"bumped_at":"2026-05-16T04:40:29.920Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’ve been trying to make some wood pieces that interlock with each other (kind of like puzzle pieces, conceptually.)  I designed the pieces using Fusion, then setup contour cuts for each piece.  There are no corners or s…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":94,"like_count":8,"has_summary":false,"last_poster_username":"TommyObar","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":5478,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10710,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":10468,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"End mill lengths vs overall cut depth","id":38691,"title":"End mill lengths vs overall cut depth","slug":"end-mill-lengths-vs-overall-cut-depth","posts_count":8,"reply_count":3,"highest_post_number":8,"image_url":null,"created_at":"2026-05-12T18:39:16.216Z","last_posted_at":"2026-05-14T01:44:14.407Z","bumped":true,"bumped_at":"2026-05-14T01:44:14.407Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have the Woodworker Elite with a water cooled 2.2kw spindle, 240v. After getting used to the machine with the free Bits&Bits endmill and some others randomly, and perhaps blindly, from Amazon, i now want to start picki…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":148,"like_count":10,"has_summary":false,"last_poster_username":"cyberreefguru","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":9461,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10468,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":136,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Regards au 240 volt machine and spindle","id":38653,"title":"Regards au 240 volt machine and spindle","slug":"regards-au-240-volt-machine-and-spindle","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":null,"created_at":"2026-05-08T10:33:04.705Z","last_posted_at":"2026-05-08T10:33:04.807Z","bumped":true,"bumped_at":"2026-05-08T10:33:04.807Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"re:- 220v \n\n\n220V Version (UK/EU/AUSTRALIA/Etc.) \nRequires a 20amp (breaker) for the machine and controller. \n\n\nA VFD/Spindle must always be plugged in directly to wall power. It will require it’s own breaker (making a t…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":43,"like_count":0,"has_summary":false,"last_poster_username":"PD1955","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":14531,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Importing into the UK","id":25033,"title":"Importing into the UK","slug":"importing-into-the-uk","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2024-01-30T16:14:04.349Z","last_posted_at":"2026-05-04T18:34:14.687Z","bumped":true,"bumped_at":"2026-05-04T18:34:14.687Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Good afternoon, I’m in Kent in England. I am looking to buy an Elite, this of course is not a cheap bit of kit with the table and other bits to go along with it, but I am struggling to find out about how much import tax …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":306,"like_count":5,"has_summary":false,"last_poster_username":"EdwardR","category_id":1,"op_like_count":2,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":8691,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6889,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14798,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13985,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Fusion - Machine Library","id":38607,"title":"Fusion - Machine Library","slug":"fusion-machine-library","posts_count":4,"reply_count":1,"highest_post_number":4,"image_url":null,"created_at":"2026-05-02T16:41:53.992Z","last_posted_at":"2026-05-03T12:31:07.458Z","bumped":true,"bumped_at":"2026-05-03T12:31:07.458Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"New guy here, I’ve looked through the threads but don’t see a clear answer so my question is around Fusion and the Machine Library. I don’t see any Onefinity models to apply for the CAM side of things. Is there an availa…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":79,"like_count":7,"has_summary":false,"last_poster_username":"wesharper","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":14355,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10710,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"BB to Redline & 2.0nm Motors","id":38602,"title":"BB to Redline & 2.0nm Motors","slug":"bb-to-redline-2-0nm-motors","posts_count":2,"reply_count":0,"highest_post_number":2,"image_url":null,"created_at":"2026-05-02T00:55:52.277Z","last_posted_at":"2026-05-03T11:21:17.760Z","bumped":true,"bumped_at":"2026-05-03T11:21:17.760Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I’m upgrading my X‑50  BB controller to the Redline HMI, and I’m especially interested in hearing from users who’ve run both the stock X‑50 Pro motors and the Redline 2.0 Nm steppers. \nHow big is the real‑world differenc…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":70,"like_count":2,"has_summary":false,"last_poster_username":"JimmyBuckets","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":3616,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"There is still no manual for hooking up the 4th axis revolution to the redline machine","id":38070,"title":"There is still no manual for hooking up the 4th axis revolution to the redline machine","slug":"there-is-still-no-manual-for-hooking-up-the-4th-axis-revolution-to-the-redline-machine","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2026-04-03T21:14:12.468Z","last_posted_at":"2026-04-25T11:10:11.820Z","bumped":true,"bumped_at":"2026-04-25T11:10:11.820Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"this is a needed thing an actual manual for  hooking things up to the redline HMI. cabling and all. \nALSO hooking up a vac to it as well. lol someone make a video please :slight_smile:","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":98,"like_count":3,"has_summary":false,"last_poster_username":"MiniSkateLabs","category_id":1,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":12496,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Princess Auto Dust Collector","id":6968,"title":"Princess Auto Dust Collector","slug":"princess-auto-dust-collector","posts_count":7,"reply_count":1,"highest_post_number":7,"image_url":null,"created_at":"2021-07-30T18:23:46.858Z","last_posted_at":"2026-04-24T23:52:48.495Z","bumped":true,"bumped_at":"2026-04-24T23:52:48.495Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Any opinions on this dust collector? https://www.princessauto.com/en/2-hp-industrial-shop-dust-collector/product/PA0008654444","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":1556,"like_count":7,"has_summary":false,"last_poster_username":"joejk","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":39,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1565,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":816,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1624,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":12452,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Filming your Projects","id":38521,"title":"Filming your Projects","slug":"filming-your-projects","posts_count":4,"reply_count":2,"highest_post_number":4,"image_url":null,"created_at":"2026-04-23T17:51:34.649Z","last_posted_at":"2026-04-23T19:12:50.104Z","bumped":true,"bumped_at":"2026-04-23T19:12:50.104Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So how are others recording when running a project?  I would love to see your setups and posable list of equipment.  I’m wanting to start making videos. \nIf this is not the correct place to ask this please delete or let …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":76,"like_count":5,"has_summary":false,"last_poster_username":"RandomPoster","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":13122,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4902,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Cutting pin holes","id":38220,"title":"Cutting pin holes","slug":"cutting-pin-holes","posts_count":34,"reply_count":21,"highest_post_number":34,"image_url":null,"created_at":"2026-04-19T23:00:56.023Z","last_posted_at":"2026-04-22T18:16:08.977Z","bumped":true,"bumped_at":"2026-04-22T18:16:08.977Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"So I recieved my Journeyman a week ago and I’m trying to cut the pin holes for the Easy ATC but I keep getting an error that I can not start the file on line 11. I’ve triedeverything so it’s confusing.","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":199,"like_count":11,"has_summary":false,"last_poster_username":"JimmyBuckets","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":14253,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":6501,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13598,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Question on manuals in a handheld evice","id":38169,"title":"Question on manuals in a handheld evice","slug":"question-on-manuals-in-a-handheld-evice","posts_count":7,"reply_count":4,"highest_post_number":7,"image_url":null,"created_at":"2026-04-14T12:34:50.124Z","last_posted_at":"2026-04-14T15:22:33.956Z","bumped":true,"bumped_at":"2026-04-14T15:22:33.956Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I just got through printing out an entire manual. I have a machine to cut the little holes so i can put the pages in a spiral bound format. However, it is a PITA. My question is this, can I simply download all the manual…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":62,"like_count":13,"has_summary":false,"last_poster_username":"L.M","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8534,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":14255,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":13399,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"New Beginning of CNC machining","id":38150,"title":"New Beginning of CNC machining","slug":"new-beginning-of-cnc-machining","posts_count":6,"reply_count":0,"highest_post_number":6,"image_url":null,"created_at":"2026-04-11T20:27:13.040Z","last_posted_at":"2026-04-12T17:41:56.416Z","bumped":true,"bumped_at":"2026-04-12T17:41:56.416Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Well, I’m getting ready to start my CNC journey. I received my machine in Jan of 2025 and its still in the boxes. My wife has had some medical issues but hopefully we’re on the right track now. Next week I plan on settin…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":131,"like_count":7,"has_summary":false,"last_poster_username":"Flipdaddy","category_id":1,"op_like_count":3,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":8145,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8590,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":136,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10468,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Spindles - Lingering Questions","id":8643,"title":"Spindles - Lingering Questions","slug":"spindles-lingering-questions","posts_count":81,"reply_count":58,"highest_post_number":83,"image_url":null,"created_at":"2021-11-01T13:59:54.220Z","last_posted_at":"2026-04-10T16:15:51.121Z","bumped":true,"bumped_at":"2026-04-10T16:15:51.121Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Well, the magic tool account is finally up for a little exercise after having recovered from the big OF purchase. After reading what I can find here on spindles, I have a few questions. \n\n\nThere is a significant price di…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":11112,"like_count":74,"has_summary":true,"last_poster_username":"HardtailSr","category_id":1,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":null,"description":"Original Poster","user_id":1133,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":1635,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":3043,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":690,"primary_group_id":null,"flair_group_id":null},{"extras":"latest","description":"Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Error at anything but slow speed","id":38098,"title":"Error at anything but slow speed","slug":"error-at-anything-but-slow-speed","posts_count":6,"reply_count":1,"highest_post_number":6,"image_url":null,"created_at":"2026-04-06T18:38:08.813Z","last_posted_at":"2026-04-07T15:00:46.743Z","bumped":true,"bumped_at":"2026-04-07T15:00:46.743Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"I have my machine. a gen2 redline, together now and as I was jogging it while installing various things like spoilboards, and probes, and tool setters, I notice that at anything but the slowest speed if I go all the way …","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":75,"like_count":5,"has_summary":false,"last_poster_username":"HardtailSr","category_id":1,"op_like_count":0,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest","description":"Original Poster, Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":688,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":8590,"primary_group_id":null,"flair_group_id":null},{"extras":null,"description":"Frequent Poster","user_id":10490,"primary_group_id":null,"flair_group_id":null}]},{"fancy_title":"Dust hoses and fittings","id":38092,"title":"Dust hoses and fittings","slug":"dust-hoses-and-fittings","posts_count":1,"reply_count":0,"highest_post_number":1,"image_url":"https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/optimized/3X/d/7/d721492023a2d9912469e54defe0467cb034b13f_2_718x1024.jpeg","created_at":"2026-04-06T15:44:46.490Z","last_posted_at":"2026-04-06T15:44:46.590Z","bumped":true,"bumped_at":"2026-04-06T15:44:46.590Z","archetype":"regular","unseen":false,"pinned":false,"unpinned":null,"excerpt":"Like most of you especially with new users, buying dust boots and the fittings that go with them can be hit or miss because hardly anyone will tell you” yes this fits this and that.” Well here is some good news. The onef…","visible":true,"closed":false,"archived":false,"bookmarked":null,"liked":null,"views":89,"like_count":1,"has_summary":false,"last_poster_username":"HardtailSr","category_id":1,"op_like_count":1,"pinned_globally":false,"featured_link":null,"is_hot":false,"has_accepted_answer":false,"can_have_answer":true,"can_vote":false,"posters":[{"extras":"latest single","description":"Original Poster, Most Recent Poster","user_id":4655,"primary_group_id":null,"flair_group_id":null}]}]}}