# 1F will not home on startup

**URL:** <https://forum.onefinitycnc.com/t/1f-will-not-home-on-startup/18429>\
**Category:** Uncategorized\
**Created:** [January 28, 2023, 12:58am UTC](https://forum.onefinitycnc.com/t/1f-will-not-home-on-startup/18429 "2023-01-28T00:58:01Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [January 28, 2023, 1:02am UTC](https://forum.onefinitycnc.com/t/1f-will-not-home-on-startup/18429/2 "2023-01-28T01:02:16Z")

</div>

Does the touch screen respond to touch? If not, see:

> [@How to connect the Touch Display (7, 8, 10.8")](https://forum.onefinitycnc.com/t/how-to-connect-the-touch-display-7-8-10-8/5081):
>
> When connecting a touchscreen to the Onefinity controller there are a few key items to make it work correctly: Step 1: POWER: Every screen must be connected to external (wall) power to operate correctly. Skipping this step is the most common mistake users make. On the 7 and 8" screens, the 12v wall power adapter must be connected to the 12v in (red arrow) port. On the 10", there is no 12v power input, instead, a USB C port labeled with a lightning bolt is used (red arrow). This cable must be …

---

_[View the full topic](https://forum.onefinitycnc.com/t/1f-will-not-home-on-startup/18429)._
