# 1Finity Journeyman HD leg upgrade & cabinet **URL:** \ **Category:** Finished Projects\ **Created:** [May 23, 2026, 1:28am UTC](https://forum.onefinitycnc.com/t/1finity-journeyman-hd-leg-upgrade-cabinet/38788 "2026-05-23T01:28:16Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![PFC](https://avatars.discourse-cdn.com/v4/letter/p/50afbb/32.png) [@PFC](https://forum.onefinitycnc.com/u/PFC)\ **Post date:** [May 23, 2026, 1:28am UTC](https://forum.onefinitycnc.com/t/1finity-journeyman-hd-leg-upgrade-cabinet/38788/1 "2026-05-23T01:28:16Z")
After installing the leg upgrade kit I used my Journeyman to make the under-mount cabinet shown here. With custom drawer inserts, it keeps my most frequently used accessories and bits immediately accessible. I used Salice Progressa undermount soft-close drawer slides and it was well worth the expense. A quick shove with my hip while my hands are busy changing the bit and the drawers retract completely. It is one of the best organizational projects for my work-flow that I’ve completed thus far. ![IMG_20260515_103235366](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/2/1250036174017e3837993c1cedd390ae613a7d92.jpeg) ![IMG_20260515_103246669](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/5/4/543fcd3040da07e57fe8d8c6ba74d35a99a39e6d.jpeg) ![IMG_20260515_103257552](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/7/6/7629f8b9bd6bc5a0eff5a2bee7bd7f4b5e92f948.jpeg) ---
**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\ **Post date:** [May 23, 2026, 12:25pm UTC](https://forum.onefinitycnc.com/t/1finity-journeyman-hd-leg-upgrade-cabinet/38788/2 "2026-05-23T12:25:35Z")
very sexy. if my fairy godmother gave me three wishes. organization would be one:)