# 24w jtech laser

**URL:** https://forum.onefinitycnc.com/t/24w-jtech-laser/18736
**Category:** Uncategorized
**Created:** [February 12, 2023, 12:31am UTC](https://forum.onefinitycnc.com/t/24w-jtech-laser/18736 "2023-02-12T00:31:31Z")
**Posts on this page:** 1
**Showing post:** 2

<div class="post-metadata">

### Author: ![suprak](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/suprak/32/5173_2.png) [@suprak](https://forum.onefinitycnc.com/u/suprak)
#### Post date: [February 13, 2023, 1:30am UTC](https://forum.onefinitycnc.com/t/24w-jtech-laser/18736/2 "2023-02-13T01:30:28Z")

</div>

I have the 24w too, haven’t had this problem.

What software are you using?  
I am assuming you have calibrated your software?

Check your gcode that your software is outputting.  
Look for `S####` codes. If the fade is driven by your software you will see these values decreasing over time.

[24 Watt Laser FAQ Resources - FAQ / Laser - Onefinity CNC Forum](https://forum.onefinitycnc.com/t/24-watt-laser-faq-resources/17903)  
[Using Lightburn On The Onefinity CNC (updated 1/11/22) - FAQ / Laser - Onefinity CNC Forum](https://forum.onefinitycnc.com/t/using-lightburn-on-the-onefinity-cnc-updated-1-11-22/10266)

---

_[View the full topic](https://forum.onefinitycnc.com/t/24w-jtech-laser/18736)._