# 36 part clock project **URL:** \ **Category:** Gallery\ **Created:** [November 23, 2024, 12:06am UTC](https://forum.onefinitycnc.com/t/36-part-clock-project/29503 "2024-11-23T00:06:26Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Pony](https://avatars.discourse-cdn.com/v4/letter/p/4da419/32.png) [@Pony](https://forum.onefinitycnc.com/u/Pony)\ **Post date:** [November 23, 2024, 12:06am UTC](https://forum.onefinitycnc.com/t/36-part-clock-project/29503/1 "2024-11-23T00:06:26Z")
Here’s a little clock project I just got done with. Tzalam and maple woods. 12" tall. The brown wood colors are actually all the same, the different colors in the picture are from different grain directions and light reflection. The weave on the outside is 12 different pieces. Bits: 1/4" compression, 1/8" compression, 1/8" ball nose. I also made 3 different jigs like the attached for gluing up parts. Pony ![Clock2](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/7/5/75d395845b93f45040e6ba376d0b67a7bebefb0d.jpeg) ![Jig](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/9/e9503e196da1bc453e569c76ea3f714e3a5fe658.jpeg) ---
**Author:** ![SailorMike](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sailormike/32/3290_2.png) [@SailorMike](https://forum.onefinitycnc.com/u/SailorMike)\ **Post date:** [November 23, 2024, 5:18pm UTC](https://forum.onefinitycnc.com/t/36-part-clock-project/29503/2 "2024-11-23T17:18:01Z")
It’s a beauty! Always glad to see another clockmaker on the site. ---
**Author:** ![Diesel\_ss](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/diesel_ss/32/29544_2.png) [@Diesel\_ss](https://forum.onefinitycnc.com/u/Diesel_ss)\ **Post date:** [November 23, 2024, 9:36pm UTC](https://forum.onefinitycnc.com/t/36-part-clock-project/29503/3 "2024-11-23T21:36:09Z")
Thats sharp. Nice job!!!