# 3d carve gets messed up

**URL:** <https://forum.onefinitycnc.com/t/3d-carve-gets-messed-up/18470>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [January 29, 2023, 11:03pm UTC](https://forum.onefinitycnc.com/t/3d-carve-gets-messed-up/18470 "2023-01-29T23:03:33Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Atroz](https://avatars.discourse-cdn.com/v4/letter/a/958977/32.png) [@Atroz](https://forum.onefinitycnc.com/u/Atroz)\
**Post date:** [January 30, 2023, 1:42am UTC](https://forum.onefinitycnc.com/t/3d-carve-gets-messed-up/18470/2 "2023-01-30T01:42:23Z")

</div>

Hi,

Not sure what your 2 sided cut issue is. Not clear what your “messing up at the file pass” means.

For your homing issue, it may be a stall homing issue. See this: [How To Adjust Stall Homing (Video)](https://forum.onefinitycnc.com/t/how-to-adjust-stall-homing-video/8529)

---

_[View the full topic](https://forum.onefinitycnc.com/t/3d-carve-gets-messed-up/18470)._