# 3d carve gets messed up

**URL:** <https://forum.onefinitycnc.com/t/3d-carve-gets-messed-up/18470>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [January 29, 2023, 11:03pm UTC](https://forum.onefinitycnc.com/t/3d-carve-gets-messed-up/18470 "2023-01-29T23:03:33Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![Atroz](https://avatars.discourse-cdn.com/v4/letter/a/958977/32.png) [@Atroz](https://forum.onefinitycnc.com/u/Atroz)\
**Post date:** [January 31, 2023, 1:18pm UTC](https://forum.onefinitycnc.com/t/3d-carve-gets-messed-up/18470/4 "2023-01-31T13:18:24Z")

</div>

Are you still having problems after changing out cables, etc?

Sounds like you are missing steps. Maybe this will help: [Troubleshooting: Rail is getting hung, stuck, or out of alignment](https://forum.onefinitycnc.com/t/troubleshooting-rail-is-getting-hung-stuck-or-out-of-alignment/10826)

Could also be a wiring problem still, or EMI issues.

---

_[View the full topic](https://forum.onefinitycnc.com/t/3d-carve-gets-messed-up/18470)._