# 3d from 2d Image using Blender

**URL:** <https://forum.onefinitycnc.com/t/3d-from-2d-image-using-blender/28245>\
**Category:** CAD (Design) Software\
**Created:** [August 15, 2024, 6:05am UTC](https://forum.onefinitycnc.com/t/3d-from-2d-image-using-blender/28245 "2024-08-15T06:05:59Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![AndyP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/andyp/32/1106_2.png) [@AndyP](https://forum.onefinitycnc.com/u/AndyP)\
**Post date:** [August 15, 2024, 6:05am UTC](https://forum.onefinitycnc.com/t/3d-from-2d-image-using-blender/28245/1 "2024-08-15T06:05:59Z")

</div>

There is often chatter about creating 3d models from 2d images. I have come across this addon for blender that claims to do just that and i thought the community might be intetested in. I havent tried it yet and i wont be able to for a few days so i thought i would share before i forget.

My expectations are low but i’m curious.

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/e/e/ee88dde44ad8d9378c794ee578e894bfd3acea72.jpeg "AutoDepth AI - Blender Addon Overview") ](https://www.youtube.com/watch?v=tBxCxaNL6LE)

---

<div class="post-metadata">

**Author:** ![suprak](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/suprak/32/5173_2.png) [@suprak](https://forum.onefinitycnc.com/u/suprak)\
**Post date:** [August 15, 2024, 1:26pm UTC](https://forum.onefinitycnc.com/t/3d-from-2d-image-using-blender/28245/2 "2024-08-15T13:26:05Z")

</div>

Bambu also has a tool called [“Relief Sculpture Maker”](https://makerworld.com/en/makerlab/reliefSculptureMaker?from=AllAboutBambu)

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/3/a302e1911206e96e66e4acea003a9f2e421c8956.jpeg)

---

<div class="post-metadata">

**Author:** ![AndyP](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/andyp/32/1106_2.png) [@AndyP](https://forum.onefinitycnc.com/u/AndyP)\
**Post date:** [August 15, 2024, 9:33pm UTC](https://forum.onefinitycnc.com/t/3d-from-2d-image-using-blender/28245/3 "2024-08-15T21:33:15Z")

</div>

That looks pretty effective. I dont suppose the software comes independent of hardware? Answered my own question, you dont, but not so easy on my mobile.

Thank you for this