# 3D printed attachments
**URL:** https://forum.onefinitycnc.com/t/3d-printed-attachments/38697
**Category:** Onefinity Spindle Kit by Redline CNC
**Created:** [May 13, 2026, 1:06pm UTC](https://forum.onefinitycnc.com/t/3d-printed-attachments/38697 "2026-05-13T13:06:11Z")
**Posts on this page:** 5
**Page:** 1
### Author:  [@gad5264](https://forum.onefinitycnc.com/u/gad5264)
#### Post date: [May 13, 2026, 1:06pm UTC](https://forum.onefinitycnc.com/t/3d-printed-attachments/38697/1 "2026-05-13T13:06:11Z")
A few days back, I saw some 3D printed attachments to sit the Redline controller on the table to keep it stationary. Now I cannot find the thread. Any chance someone knows where it might be?
Thanks in advance
The Official Spindle of Onefinity CNC by @Redlinecnc
> **[Redline CNC | CNC Electronics, Spindles, & VFDs, & Controllers](https://www.redlinecnc.com/)**
>
> Redline CNC manufactures high quality CNC parts.
> • Spindles with all metal VFDs
> • Modern CNC Controllers
> “Push your CNC to its limit”
---
### Author:  [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)
#### Post date: [May 13, 2026, 5:25pm UTC](https://forum.onefinitycnc.com/t/3d-printed-attachments/38697/2 "2026-05-13T17:25:21Z")
this might be what you are looking for.
> [@Redline VFD desktop clamps](https://forum.onefinitycnc.com/t/redline-vfd-desktop-clamps/38511):
>
> A recent post by Robert/ HardtailSr pointed out the lack of a way to secure the VFD desktop mount. He suggested that that a 3d printed solution would be appropriate. My VFD is on a wall mount so I ordered up a desktop version and began modeling in Shapr3d. After numerous iterations this is what I came up with. They hold the mount very securely and increase its footprint minimally. I’m pleased with the results. I’m offering these at $20 ,including shipping. I’m also offering the file if you want…
---
### Author:  [@gad5264](https://forum.onefinitycnc.com/u/gad5264)
#### Post date: [May 13, 2026, 5:39pm UTC](https://forum.onefinitycnc.com/t/3d-printed-attachments/38697/3 "2026-05-13T17:39:12Z")
Thanks HardtailSr, that’s what I was looking for
---
### Author:  [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)
#### Post date: [May 13, 2026, 6:20pm UTC](https://forum.onefinitycnc.com/t/3d-printed-attachments/38697/4 "2026-05-13T18:20:35Z")
glad to be of help. :::::::::::::::🙂
---
### Author:  [@Woodtick](https://forum.onefinitycnc.com/u/Woodtick)
#### Post date: [May 13, 2026, 9:15pm UTC](https://forum.onefinitycnc.com/t/3d-printed-attachments/38697/5 "2026-05-13T21:15:22Z")
Yup, I make those! Hit me up at [fro608@gmail.com](mailto:fro608@gmail.com) and I can help you out.
Thanks!