# 4th axis post processor for masso on maker

**URL:** <https://forum.onefinitycnc.com/t/4th-axis-post-processor-for-masso-on-maker/33064>\
**Category:** Uncategorized\
**Created:** [May 9, 2025, 3:37pm UTC](https://forum.onefinitycnc.com/t/4th-axis-post-processor-for-masso-on-maker/33064 "2025-05-09T15:37:46Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![onmorenewbie](https://avatars.discourse-cdn.com/v4/letter/o/65b543/32.png) [@onmorenewbie](https://forum.onefinitycnc.com/u/onmorenewbie)\
**Post date:** [May 9, 2025, 3:37pm UTC](https://forum.onefinitycnc.com/t/4th-axis-post-processor-for-masso-on-maker/33064/1 "2025-05-09T15:37:46Z")

</div>

I just received my revolution 4t axis I’m using Carveco maker as my software but cannot locate the post processor for the axis, maker has the latest download and I cannot find it , the 4th axis manual states that it should be there or list has to be updated is there any help out there, machine is a elite foreman with masso controller

---

<div class="post-metadata">

**Author:** ![onmorenewbie](https://avatars.discourse-cdn.com/v4/letter/o/65b543/32.png) [@onmorenewbie](https://forum.onefinitycnc.com/u/onmorenewbie)\
**Post date:** [May 11, 2025, 2:47pm UTC](https://forum.onefinitycnc.com/t/4th-axis-post-processor-for-masso-on-maker/33064/3 "2025-05-11T14:47:23Z")

</div>

I tried the one highlighted and it gives me a warning message , “TPM7002 post processor error : wrapped axis for toolpath Y does not match axis wrapped in post processor X”,so I ignored it and it will not let me save, I received a response from support that stated to use the Masso-Rotary Y2A ATC INCH 1.con, but its not in the data base