# 80mm spindle mount question

**URL:** <https://forum.onefinitycnc.com/t/80mm-spindle-mount-question/6259>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [June 19, 2021, 10:34pm UTC](https://forum.onefinitycnc.com/t/80mm-spindle-mount-question/6259 "2021-06-19T22:34:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Texasrpbrock](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/texasrpbrock/32/3723_2.png) [@Texasrpbrock](https://forum.onefinitycnc.com/u/Texasrpbrock)\
**Post date:** [June 19, 2021, 10:34pm UTC](https://forum.onefinitycnc.com/t/80mm-spindle-mount-question/6259/1 "2021-06-19T22:34:01Z")

</div>

Concerning the 80mm spindle mount, any chance a POrter-Cable 75182 or any other 80mm sized router would fit in a pinch? I still plan to purchase a spindle but wondering in the event of a spindle breakdown could a router be used to finish working on a project?

---

<div class="post-metadata">

**Author:** ![eJohn](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ejohn/32/1064_2.png) [@eJohn](https://forum.onefinitycnc.com/u/eJohn)\
**Post date:** [July 30, 2021, 5:11pm UTC](https://forum.onefinitycnc.com/t/80mm-spindle-mount-question/6259/2 "2021-07-30T17:11:47Z")

</div>

Since our 80 mm spindle is going back, I thought too what about my Bosh router. But it measures about 87 mmand I think this is the standard size for larger routers.

Right now I’m making a spacer adapter so I can put the 65 mm router into the 80 mm Z adapter. I figure just as long as it holds the router from moving it should work. Even though it might be exactly centered it will be all right because it’s zeroed.
