# A Homing grinding **URL:** \ **Category:** Uncategorized\ **Created:** [December 16, 2022, 5:35pm UTC](https://forum.onefinitycnc.com/t/a-homing-grinding/17448 "2022-12-16T17:35:37Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![Hgreen4783](https://avatars.discourse-cdn.com/v4/letter/h/43a26b/32.png) [@Hgreen4783](https://forum.onefinitycnc.com/u/Hgreen4783)\ **Post date:** [December 16, 2022, 5:35pm UTC](https://forum.onefinitycnc.com/t/a-homing-grinding/17448/1 "2022-12-16T17:35:37Z")
Well after 7 months waiting to get back into my house I finally got my X-50 woodworker setup. When I try to home the machine it goes to the front left hand corner and makes a grinding noise and a warning comes up and says my x axis is off by -1mm. It shows zero on the screen after about 2 seconds of grinding. What am I doing wrong and how do I fix it? Thanks ---
**Author:** ![DizzyG](https://avatars.discourse-cdn.com/v4/letter/d/a87d85/32.png) [@DizzyG](https://forum.onefinitycnc.com/u/DizzyG)\ **Post date:** [December 17, 2022, 1:22pm UTC](https://forum.onefinitycnc.com/t/a-homing-grinding/17448/2 "2022-12-17T13:22:44Z")
The “stall homing” is off. Here’s how to adjust that. Your rails being out of square may be the cause also > [@How To Adjust Stall Homing (Video) (BB Controllers only)](https://forum.onefinitycnc.com/t/how-to-adjust-stall-homing-video/8529): > > (this does not apply to elite machines) You may need to adjust stall homing from time to time during the life of the machine. CLIMATE OF MACHINE: Changes in the environment, seasonal changes, static electricity, expansion and contraction,(cold in the morning, hot in the evening). etc. can have an affect on the stall homing. Expect to adjust this during the change from hot to cold and cold to hot seasons or just a unheated shop in the morning to a heated shop when you work in it. If you are … > [@Setup and machine squaring](https://forum.onefinitycnc.com/t/setup-and-machine-squaring/15735): > > Just received my X50 Woodworker yesterday. I followed the YouTube videos on setting up the machine and squaring it. When i booted the system and homed the machine, the left Y rail stops ~ 1/4" short of the end. However, the right Y rail comes fully to the end stop. Measured both rails on the table and they are an equal distance from the table end. Am I missing something here? Do I need to unscrew and manually realign everything and start over? Thanks for your help. Tom ---
**Author:** ![tvettera](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/tvettera/32/9492_2.png) [@tvettera](https://forum.onefinitycnc.com/u/tvettera)\ **Post date:** [December 17, 2022, 5:06pm UTC](https://forum.onefinitycnc.com/t/a-homing-grinding/17448/3 "2022-12-17T17:06:08Z")
Thanks Eric. Appreciate the information. Tom ---
**Author:** ![Hgreen4783](https://avatars.discourse-cdn.com/v4/letter/h/43a26b/32.png) [@Hgreen4783](https://forum.onefinitycnc.com/u/Hgreen4783)\ **Post date:** [December 18, 2022, 1:15am UTC](https://forum.onefinitycnc.com/t/a-homing-grinding/17448/4 "2022-12-18T01:15:48Z")
Thanks, that took care of the problem ---
**Author:** ![DizzyG](https://avatars.discourse-cdn.com/v4/letter/d/a87d85/32.png) [@DizzyG](https://forum.onefinitycnc.com/u/DizzyG)\ **Post date:** [December 21, 2022, 1:58am UTC](https://forum.onefinitycnc.com/t/a-homing-grinding/17448/5 "2022-12-21T01:58:21Z")
Quite glad to hear, happy CNC’ing Eric ---
**Author:** ![bob01dog](https://avatars.discourse-cdn.com/v4/letter/b/b4bc9f/32.png) [@bob01dog](https://forum.onefinitycnc.com/u/bob01dog)\ **Post date:** [May 27, 2023, 11:15pm UTC](https://forum.onefinitycnc.com/t/a-homing-grinding/17448/6 "2023-05-27T23:15:22Z")
Mine is also grinding and stopping short of going all the way to the left it’s about 8in short