# AAGGHH Dust Boot Brush will NOT stay in

**URL:** <https://forum.onefinitycnc.com/t/aagghh-dust-boot-brush-will-not-stay-in/8542>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [October 28, 2021, 1:01am UTC](https://forum.onefinitycnc.com/t/aagghh-dust-boot-brush-will-not-stay-in/8542 "2021-10-28T01:01:09Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![sigung](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sigung/32/7186_2.png) [@sigung](https://forum.onefinitycnc.com/u/sigung)\
**Post date:** [October 28, 2021, 1:01am UTC](https://forum.onefinitycnc.com/t/aagghh-dust-boot-brush-will-not-stay-in/8542/1 "2021-10-28T01:01:09Z")

</div>

The brush will NOT stay in, no matter what I do, it keeps popping out!!!

---

<div class="post-metadata">

**Author:** ![hamdiggity](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hamdiggity/32/22834_2.png) [@hamdiggity](https://forum.onefinitycnc.com/u/hamdiggity)\
**Post date:** [October 28, 2021, 1:04am UTC](https://forum.onefinitycnc.com/t/aagghh-dust-boot-brush-will-not-stay-in/8542/2 "2021-10-28T01:04:29Z")

</div>

I pushed mine in with the edge/point of a putty knife. That was the only way I could get it to seat properly. Hope that helps.

---

<div class="post-metadata">

**Author:** ![sigung](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sigung/32/7186_2.png) [@sigung](https://forum.onefinitycnc.com/u/sigung)\
**Post date:** [October 28, 2021, 1:07am UTC](https://forum.onefinitycnc.com/t/aagghh-dust-boot-brush-will-not-stay-in/8542/3 "2021-10-28T01:07:52Z")

</div>

Thanks for the help my friend. I _have_ been able to get it all the way down into the channel, but it just keeps popping back out, usually on the back side first.

---

<div class="post-metadata">

**Author:** ![pwpacp](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/pwpacp/32/1718_2.png) [@pwpacp](https://forum.onefinitycnc.com/u/pwpacp)\
**Post date:** [October 28, 2021, 12:02pm UTC](https://forum.onefinitycnc.com/t/aagghh-dust-boot-brush-will-not-stay-in/8542/4 "2021-10-28T12:02:44Z")

</div>

How old is your boot? Other posts seemed to indicate there may have been a mfg defect from the 1F supplier that caused trouble with brush seating.

---

<div class="post-metadata">

**Author:** ![sigung](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sigung/32/7186_2.png) [@sigung](https://forum.onefinitycnc.com/u/sigung)\
**Post date:** [October 28, 2021, 3:46pm UTC](https://forum.onefinitycnc.com/t/aagghh-dust-boot-brush-will-not-stay-in/8542/5 "2021-10-28T15:46:49Z")

</div>

I got the machine about 3 months ago, but I had to build a table for it and learn fusion, so I’m just now getting things put together. UPDATE I emailed support and the IMMEDIATELY sent out a replacement, so they must be aware of the problem. GREAT RESPONSE TIME AND GREAT SUPPORT!
