# Alarm Home Error and X motor alarm

**URL:** <https://forum.onefinitycnc.com/t/alarm-home-error-and-x-motor-alarm/26046>\
**Category:** Elite Series (Masso & Redline) (Gen 1)\
**Created:** [March 20, 2024, 8:33pm UTC](https://forum.onefinitycnc.com/t/alarm-home-error-and-x-motor-alarm/26046 "2024-03-20T20:33:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jcjahner](https://avatars.discourse-cdn.com/v4/letter/j/c4cdca/32.png) [@jcjahner](https://forum.onefinitycnc.com/u/jcjahner)\
**Post date:** [March 20, 2024, 8:33pm UTC](https://forum.onefinitycnc.com/t/alarm-home-error-and-x-motor-alarm/26046/1 "2024-03-20T20:33:48Z")

</div>

Every time I Home My Elite Journeyman I get a Alarm Homing error and a X Motor Alarm. Both boxes are red. How do I correct this. Thank you

---

<div class="post-metadata">

**Author:** ![jcjahner](https://avatars.discourse-cdn.com/v4/letter/j/c4cdca/32.png) [@jcjahner](https://forum.onefinitycnc.com/u/jcjahner)\
**Post date:** [March 21, 2024, 2:43am UTC](https://forum.onefinitycnc.com/t/alarm-home-error-and-x-motor-alarm/26046/3 "2024-03-21T02:43:38Z")

</div>

Yes the X Axis moves but once it gets to the home the X Motor Alarm comes on.

 ![F5F205DF8C2243EDA4725F68C7C5627B.png](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/2/e/2e839751fd263c2803de1577258c08f5c6235600.png)

---

<div class="post-metadata">

**Author:** ![jcjahner](https://avatars.discourse-cdn.com/v4/letter/j/c4cdca/32.png) [@jcjahner](https://forum.onefinitycnc.com/u/jcjahner)\
**Post date:** [March 24, 2024, 4:51pm UTC](https://forum.onefinitycnc.com/t/alarm-home-error-and-x-motor-alarm/26046/6 "2024-03-24T16:51:59Z")

</div>

Thank You Sometimes it works perfectly. I’ll check my connections. Is there a way to clear the alarm?