# Another MPG question for Masso

**URL:** <https://forum.onefinitycnc.com/t/another-mpg-question-for-masso/26033>\
**Category:** Uncategorized\
**Created:** [March 20, 2024, 12:05am UTC](https://forum.onefinitycnc.com/t/another-mpg-question-for-masso/26033 "2024-03-20T00:05:27Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Truckdocron](https://avatars.discourse-cdn.com/v4/letter/t/6de8d8/32.png) [@Truckdocron](https://forum.onefinitycnc.com/u/Truckdocron)\
**Post date:** [March 20, 2024, 12:05am UTC](https://forum.onefinitycnc.com/t/another-mpg-question-for-masso/26033/1 "2024-03-20T00:05:27Z")

</div>

There are a few other 15 pin MPG’s on the market and curious if anyone looked in to one of those and which wiring to change out to make work? I did read that the 15 pin from Amazon or Ebay are 5 volt so one thing that would be need is a voltage reducer in line would work? The ones I looked at are Rat Rig’ however my best guess is that they all come off the same production line!  
Thanks for any input!!

---

<div class="post-metadata">

**Author:** ![TMToronto](https://avatars.discourse-cdn.com/v4/letter/t/7ea924/32.png) [@TMToronto](https://forum.onefinitycnc.com/u/TMToronto)\
**Post date:** [March 20, 2024, 2:23am UTC](https://forum.onefinitycnc.com/t/another-mpg-question-for-masso/26033/2 "2024-03-20T02:23:23Z")

</div>

If you have a Masso controller…

> [@How to wire a NONE Masso MPG](https://forum.onefinitycnc.com/t/how-to-wire-a-none-masso-mpg/24210):
>
> I bought a CNCTOPBAOS 100PPR Universal 4 Axis CNC Handwheel MPG Pendant. I have wired it using a breakout connector so I can get it to work and then soldier it once it is working. But it does not work. Has anyone have this brand of MPG to work on the Masso G3? I would buy the Masso version but for $200.00 versus $75 MPG. The extra money can buy a couple of wood clamps.