# Any tips on replacements part or importance accessory? **URL:** \ **Category:** Original/PRO Series (Buildbotics) (Gen 1)\ **Created:** [March 12, 2022, 12:04pm UTC](https://forum.onefinitycnc.com/t/any-tips-on-replacements-part-or-importance-accessory/11821 "2022-03-12T12:04:05Z")\ **Posts on this page:** 6\ **Page:** 1
**Author:** ![AbdoNash](https://avatars.discourse-cdn.com/v4/letter/a/d2c977/32.png) [@AbdoNash](https://forum.onefinitycnc.com/u/AbdoNash)\ **Post date:** [March 12, 2022, 12:04pm UTC](https://forum.onefinitycnc.com/t/any-tips-on-replacements-part-or-importance-accessory/11821/1 "2022-03-12T12:04:05Z")
Hi Good day, My cart is ready to go. I’m new to the CNC this is going to be the first purchase . Onefinity Journeyman X-50 (48"x32" Cut Area) Journeyman QCW Frame (Secure from above) Any Surface Leveling System Onefinity “Wireless” Joystick Small Set Oops Clamps Onefinity 3-Axis Touch Probe Since shipping cost is waaaay too much (1600 USD) for me, I wanted to do it one time. is there any replacement parts I’m going to need the frequently ? Or any other recommendation ? ---
**Author:** ![cyberreefguru](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/cyberreefguru/32/27385_2.png) [@cyberreefguru](https://forum.onefinitycnc.com/u/cyberreefguru)\ **Post date:** [March 12, 2022, 5:07pm UTC](https://forum.onefinitycnc.com/t/any-tips-on-replacements-part-or-importance-accessory/11821/2 "2022-03-12T17:07:13Z")
You will need some end mills at a minimum. I’m assuming you selected the controller and monitor as well? Not sure where you got $1600 from - a Journeyman alone (no options) is over $2800. -Tom ---
**Author:** ![KenA](https://avatars.discourse-cdn.com/v4/letter/k/e9bcb4/32.png) [@KenA](https://forum.onefinitycnc.com/u/KenA)\ **Post date:** [March 12, 2022, 6:16pm UTC](https://forum.onefinitycnc.com/t/any-tips-on-replacements-part-or-importance-accessory/11821/3 "2022-03-12T18:16:59Z")
I believe his shipping alone is $1,600 which is why he wants to get everything in one shot. ---
**Author:** ![AbdoNash](https://avatars.discourse-cdn.com/v4/letter/a/d2c977/32.png) [@AbdoNash](https://forum.onefinitycnc.com/u/AbdoNash)\ **Post date:** [March 13, 2022, 8:58pm UTC](https://forum.onefinitycnc.com/t/any-tips-on-replacements-part-or-importance-accessory/11821/4 "2022-03-13T20:58:32Z")
Yes it’s with the controller but not the monitor. I’ll have a daticated laptop. As Ken said that’s the shipping cost only. So there is not parts of the machine I’ll be needing soon? ---
**Author:** ![ben](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ben/32/1298_2.png) [@ben](https://forum.onefinitycnc.com/u/ben)\ **Post date:** [March 14, 2022, 7:07am UTC](https://forum.onefinitycnc.com/t/any-tips-on-replacements-part-or-importance-accessory/11821/5 "2022-03-14T07:07:49Z")
I would go with the large set of Oops clamps. I have the small set, they are amazing, I wish I had ordered the large set but… shipping and import costs to Europe (while not as high as what you experience) means I’m hesitating to re-order for such a small item. Also consider the hand nuts for the t-tracks since you have a QCW frame. Make sure you don’t need the cable extension (it depends on where you plan to sit your controller). I broke my suck it dust boot in the first week I had the machine. The boot is the most fragile part that moves. You can mill and glue most replacement parts but it might be an idea to get a suck it shoe (in the replacement part section) which you cannot mill yourself. Or to add the basic boot kit as spare parts. Or better: be very careful while you learn to jog the machine around. ---
**Author:** ![AbdoNash](https://avatars.discourse-cdn.com/v4/letter/a/d2c977/32.png) [@AbdoNash](https://forum.onefinitycnc.com/u/AbdoNash)\ **Post date:** [April 1, 2022, 12:20pm UTC](https://forum.onefinitycnc.com/t/any-tips-on-replacements-part-or-importance-accessory/11821/6 "2022-04-01T12:20:11Z")
Thank you all , placing the order.