# Anyone using joint cam software?
**URL:** https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896
**Category:** CAD (General)
**Created:** [July 26, 2021, 7:18pm UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896 "2021-07-26T19:18:01Z")
**Posts on this page:** 10
**Page:** 2
### Author:  [@WmColl46](https://forum.onefinitycnc.com/u/WmColl46)
#### Post date: [February 6, 2022, 12:01am UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896/22 "2022-02-06T00:01:05Z")
---
### Author:  [@WmColl46](https://forum.onefinitycnc.com/u/WmColl46)
#### Post date: [February 6, 2022, 12:03am UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896/23 "2022-02-06T00:03:56Z")
---
### Author:  [@Morelli](https://forum.onefinitycnc.com/u/Morelli)
#### Post date: [February 6, 2022, 12:28am UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896/24 "2022-02-06T00:28:58Z")
William, that is a very fine setup!
---
### Author:  [@JimHatch](https://forum.onefinitycnc.com/u/JimHatch)
#### Post date: [February 6, 2022, 2:00am UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896/25 "2022-02-06T02:00:51Z")
Nice looking table. The lifting casters are really useful.
---
### Author:  [@WmColl46](https://forum.onefinitycnc.com/u/WmColl46)
#### Post date: [February 6, 2022, 2:18pm UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896/27 "2022-02-06T14:18:00Z")
Thanks to you, I am using JointCam. Developer offers continual upgrades, and we should encourage new features! Just finished two custom storm/screendoors.
Had to make a jig to hold stiles for mortise.
---
### Author:  [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)
#### Post date: [July 11, 2022, 8:18pm UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896/28 "2022-07-11T20:18:00Z")
wow some of these vertical setups make me think you all are watching over my shoulder as i build my table for the onefinity journyman. I think though that you will all appreciate my additional twist on the whole thing. I am nearly there with my table build and i took lots of pictures as i am going along. see you all soon.
---
### Author:  [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)
#### Post date: [July 11, 2022, 11:41pm UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896/29 "2022-07-11T23:41:33Z")
just an idea but what about doing loose joint tennons that way all you are doing is carving a hole/ slot.?
---
### Author:  [@WmColl46](https://forum.onefinitycnc.com/u/WmColl46)
#### Post date: [July 17, 2022, 10:03pm UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896/30 "2022-07-17T22:03:27Z")
Robert, Thanks for posting, we are always open to ideas and twists. Yes, please post photos when finished.
Loose tendons would work for many projects. So far, I’m letting Joint Cam do the figuring with the tolerances, thus, I’m letting the machine do the work for both mortise and tendon. (and dovetails, etc.)
I would think you are right, a basic cnc program could cut the slots and it worth keeping in mind! Especially for a challenging assembly…Bill
---
### Author:  [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)
#### Post date: [July 17, 2022, 11:04pm UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896/31 "2022-07-17T23:04:29Z")
bill I am glad I could help.
---
### Author:  [@JointCAM\_Gerry](https://forum.onefinitycnc.com/u/JointCAM_Gerry)
#### Post date: [February 25, 2023, 4:17pm UTC](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896/32 "2023-02-25T16:17:24Z")
> [@WmColl46](#):
>
> Loose tendons would work for many projects. So far, I’m letting Joint Cam do the figuring with the tolerances, thus, I’m letting the machine do the work for both mortise and tendon.
JointCAM does have an option for loose tenons.
[Previous page](https://forum.onefinitycnc.com/t/anyone-using-joint-cam-software/6896.md?page=1)