# Anyway to manual enter gcode from touchscreen

**URL:** <https://forum.onefinitycnc.com/t/anyway-to-manual-enter-gcode-from-touchscreen/6328>\
**Category:** Controller (Buildbotics) Discussion\
**Created:** [June 23, 2021, 4:07am UTC](https://forum.onefinitycnc.com/t/anyway-to-manual-enter-gcode-from-touchscreen/6328 "2021-06-23T04:07:41Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![rockytoptim](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rockytoptim/32/3016_2.png) [@rockytoptim](https://forum.onefinitycnc.com/u/rockytoptim)\
**Post date:** [June 23, 2021, 4:07am UTC](https://forum.onefinitycnc.com/t/anyway-to-manual-enter-gcode-from-touchscreen/6328/1 "2021-06-23T04:07:41Z")

</div>

Is there anyway to run gcode from the touchscreen interface? Or am i stuck with putting it in a file then running the file?

---

<div class="post-metadata">

**Author:** ![RonHoppus](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/ronhoppus/32/2374_2.png) [@RonHoppus](https://forum.onefinitycnc.com/u/RonHoppus)\
**Post date:** [June 23, 2021, 4:19am UTC](https://forum.onefinitycnc.com/t/anyway-to-manual-enter-gcode-from-touchscreen/6328/2 "2021-06-23T04:19:41Z")

</div>

Use the MDI tab and type code there

---

<div class="post-metadata">

**Author:** ![rockytoptim](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rockytoptim/32/3016_2.png) [@rockytoptim](https://forum.onefinitycnc.com/u/rockytoptim)\
**Post date:** [June 23, 2021, 4:23am UTC](https://forum.onefinitycnc.com/t/anyway-to-manual-enter-gcode-from-touchscreen/6328/3 "2021-06-23T04:23:56Z")

</div>

Thanks RonHoppus. Thats exactly what I needed. Your Awesome.