# Aspire post processor

**URL:** <https://forum.onefinitycnc.com/t/aspire-post-processor/21777>\
**Category:** Uncategorized\
**Created:** [August 6, 2023, 2:50am UTC](https://forum.onefinitycnc.com/t/aspire-post-processor/21777 "2023-08-06T02:50:04Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![searl70](https://avatars.discourse-cdn.com/v4/letter/s/a88e57/32.png) [@searl70](https://forum.onefinitycnc.com/u/searl70)\
**Post date:** [August 6, 2023, 2:50am UTC](https://forum.onefinitycnc.com/t/aspire-post-processor/21777/1 "2023-08-06T02:50:04Z")

</div>

In Aspire, which post processor do you use for the Masso G3 Touch?

---

<div class="post-metadata">

**Author:** ![Enginerd](https://avatars.discourse-cdn.com/v4/letter/e/bcef8e/32.png) [@Enginerd](https://forum.onefinitycnc.com/u/Enginerd)\
**Post date:** [August 6, 2023, 10:14am UTC](https://forum.onefinitycnc.com/t/aspire-post-processor/21777/2 "2023-08-06T10:14:47Z")

</div>

[https://docs.masso.com.au/cam-post-processors/vectric-vcarve-and-vectric-aspire](https://docs.masso.com.au/cam-post-processors/vectric-vcarve-and-vectric-aspire)

---

<div class="post-metadata">

**Author:** ![Chucky82](https://avatars.discourse-cdn.com/v4/letter/c/848f3c/32.png) [@Chucky82](https://forum.onefinitycnc.com/u/Chucky82)\
**Post date:** [August 6, 2023, 11:30am UTC](https://forum.onefinitycnc.com/t/aspire-post-processor/21777/3 "2023-08-06T11:30:50Z")

</div>

You use Masso ARCS mm or inch. If it isn’t on there you can download post processors. I had to as my version of aspire was 9.5.

---

<div class="post-metadata">

**Author:** ![ChrisS](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/chriss/32/22864_2.png) [@ChrisS](https://forum.onefinitycnc.com/u/ChrisS)\
**Post date:** [August 7, 2023, 3:17am UTC](https://forum.onefinitycnc.com/t/aspire-post-processor/21777/4 "2023-08-07T03:17:02Z")

</div>

There is also some altered ones as the one from Masso/ vectric doesnt have the command needed to turn on the attached vacuum

> [@Vectric Postprocessor for the Elite Series](https://forum.onefinitycnc.com/t/vectric-postprocessor-for-the-elite-series/19766):
>
> In Vcarve Pro there is a Post Processor for Masso W/ATC , is this to be used for the Elite Series? Thanks for any help Pat

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [August 7, 2023, 5:29am UTC](https://forum.onefinitycnc.com/t/aspire-post-processor/21777/5 "2023-08-07T05:29:10Z")

</div>

They updated it this week to include the m8 command to turn in the vac. If your on v11, refresh the machine configuration and it will download the updated onefinity eltite pp with the vac command on!