# Assembly questions for Elite Woodworker
**URL:** https://forum.onefinitycnc.com/t/assembly-questions-for-elite-woodworker/24957
**Category:** Elite Series (Masso & Redline) (Gen 1)
**Created:** [January 27, 2024, 1:17am UTC](https://forum.onefinitycnc.com/t/assembly-questions-for-elite-woodworker/24957 "2024-01-27T01:17:59Z")
**Posts on this page:** 4
**Page:** 1
### Author:  [@KevTN](https://forum.onefinitycnc.com/u/KevTN)
#### Post date: [January 27, 2024, 1:17am UTC](https://forum.onefinitycnc.com/t/assembly-questions-for-elite-woodworker/24957/1 "2024-01-27T01:17:59Z")
I just unboxed my Elite Woodworker. I am going to build my table this weekend and hopefully finish assembly as well.
I ordered the stiffy and thought it would be pre-installed but it is not. With that being said the only video I can find installing the stiffy is without the drag chain pre installed. Am I missing it somewhere? Also, Can I assemble it prior to installing the X rail on the Y rails?
Are all three stepper motors the same? or if they are not how do I know where each one goes?
Any hints/tips or words of wisdom for the assembly because it is not like the video shows.
Thank you
---
### Author:  [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)
#### Post date: [January 27, 2024, 1:58am UTC](https://forum.onefinitycnc.com/t/assembly-questions-for-elite-woodworker/24957/2 "2024-01-27T01:58:57Z")
Stiffy install here [https://youtu.be/RCIEqLnvU4Q?si=ryZ8SlQ\_260\_uC67](https://youtu.be/RCIEqLnvU4Q?si=ryZ8SlQ_260_uC67)
All stepper motors are exactly the same. Doesn’t matter which you install where.
---
### Author:  [@KevTN](https://forum.onefinitycnc.com/u/KevTN)
#### Post date: [January 27, 2024, 1:17pm UTC](https://forum.onefinitycnc.com/t/assembly-questions-for-elite-woodworker/24957/3 "2024-01-27T13:17:04Z")
Thank you! I appreciate the assist
---
### Author:  [@KevTN](https://forum.onefinitycnc.com/u/KevTN)
#### Post date: [January 31, 2024, 2:38pm UTC](https://forum.onefinitycnc.com/t/assembly-questions-for-elite-woodworker/24957/4 "2024-01-31T14:38:18Z")
I have been piecing together building table and the Woodworker. I powered it up for the first time last night. Homing and jogging went great! I still have a couple of more things to do. I do have a question: I know that homing can be sped up what speed is recommended as the out of the box is painfully slow.
Thank you! The build was stupid easy!