# Asus compatible monitor issues

**URL:** <https://forum.onefinitycnc.com/t/asus-compatible-monitor-issues/20393>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [May 1, 2023, 11:56pm UTC](https://forum.onefinitycnc.com/t/asus-compatible-monitor-issues/20393 "2023-05-01T23:56:00Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Rogm1017](https://avatars.discourse-cdn.com/v4/letter/r/c2a13f/32.png) [@Rogm1017](https://forum.onefinitycnc.com/u/Rogm1017)\
**Post date:** [May 1, 2023, 11:56pm UTC](https://forum.onefinitycnc.com/t/asus-compatible-monitor-issues/20393/1 "2023-05-01T23:56:00Z")

</div>

If anyone is using the asus touchscreen minoitor that is compatible with the 1F, would you please tell me how managed to get the touch portion working. The monitor doesn’t have a usb C port for the cable to enable touch. Thanks…

---

<div class="post-metadata">

**Author:** ![WaywardWoodworker](https://avatars.discourse-cdn.com/v4/letter/w/e79b87/32.png) [@WaywardWoodworker](https://forum.onefinitycnc.com/u/WaywardWoodworker)\
**Post date:** [May 2, 2023, 12:02am UTC](https://forum.onefinitycnc.com/t/asus-compatible-monitor-issues/20393/2 "2023-05-02T00:02:49Z")

</div>

What model number are your looking at?

---

<div class="post-metadata">

**Author:** ![Rogm1017](https://avatars.discourse-cdn.com/v4/letter/r/c2a13f/32.png) [@Rogm1017](https://forum.onefinitycnc.com/u/Rogm1017)\
**Post date:** [May 2, 2023, 12:22am UTC](https://forum.onefinitycnc.com/t/asus-compatible-monitor-issues/20393/3 "2023-05-02T00:22:32Z")

</div>

It is the asus VT229H

---

<div class="post-metadata">

**Author:** ![WaywardWoodworker](https://avatars.discourse-cdn.com/v4/letter/w/e79b87/32.png) [@WaywardWoodworker](https://forum.onefinitycnc.com/u/WaywardWoodworker)\
**Post date:** [May 2, 2023, 12:46am UTC](https://forum.onefinitycnc.com/t/asus-compatible-monitor-issues/20393/4 "2023-05-02T00:46:41Z")

</div>

I believe you need to swap in a USB 2.0 to USB 2.0 cable to use it, the one that ships with the Onefinity is USB 2.0 to USB C

---

<div class="post-metadata">

**Author:** ![Rogm1017](https://avatars.discourse-cdn.com/v4/letter/r/c2a13f/32.png) [@Rogm1017](https://forum.onefinitycnc.com/u/Rogm1017)\
**Post date:** [May 2, 2023, 1:17am UTC](https://forum.onefinitycnc.com/t/asus-compatible-monitor-issues/20393/5 "2023-05-02T01:17:48Z")

</div>

The monitor has the usb - b connector ( the square block ). So i assume i need a usb-b to c cable then?

---

<div class="post-metadata">

**Author:** ![WaywardWoodworker](https://avatars.discourse-cdn.com/v4/letter/w/e79b87/32.png) [@WaywardWoodworker](https://forum.onefinitycnc.com/u/WaywardWoodworker)\
**Post date:** [May 2, 2023, 1:19am UTC](https://forum.onefinitycnc.com/t/asus-compatible-monitor-issues/20393/6 "2023-05-02T01:19:23Z")

</div>

On the Onefinity controller end (Raspberry PI) it should be a USB 2.0 type A connector, not USB-C

---

<div class="post-metadata">

**Author:** ![Rogm1017](https://avatars.discourse-cdn.com/v4/letter/r/c2a13f/32.png) [@Rogm1017](https://forum.onefinitycnc.com/u/Rogm1017)\
**Post date:** [May 2, 2023, 1:29am UTC](https://forum.onefinitycnc.com/t/asus-compatible-monitor-issues/20393/7 "2023-05-02T01:29:49Z")

</div>

Yes, i’m sorry you are correct. Thank you.