# Asus touch screen not working

**URL:** <https://forum.onefinitycnc.com/t/asus-touch-screen-not-working/13885>\
**Category:** Uncategorized\
**Created:** [June 29, 2022, 7:54pm UTC](https://forum.onefinitycnc.com/t/asus-touch-screen-not-working/13885 "2022-06-29T19:54:27Z")\
**Posts on this page:** 1\
**Showing post:** 6

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [June 29, 2022, 8:30pm UTC](https://forum.onefinitycnc.com/t/asus-touch-screen-not-working/13885/6 "2022-06-29T20:30:22Z")

</div>

Hey Mike,

according to [Confirmed Aftermarket Screens/Monitors that work with the Onefinity](https://forum.onefinitycnc.com/t/confirmed-aftermarket-screens-monitors-that-work-with-the-onefinity/4484), Asus VT229H works.

You could open a terminal window with Ctrl-T Ctrl-C and type:

`sudo grep -i touch /var/log/Xorg.0.log `

If a touch device was found, it would be shown. Otherwise this command would output nothing.

Next, what happens if you type:

`sudo tail -F /var/log/syslog`

and then you plug the USB cable in?

---

_[View the full topic](https://forum.onefinitycnc.com/t/asus-touch-screen-not-working/13885)._
