# Battery Powered Dry Run Laser Suggestions?

**URL:** <https://forum.onefinitycnc.com/t/battery-powered-dry-run-laser-suggestions/30481>\
**Category:** Accessories\
**Created:** [January 16, 2025, 2:05am UTC](https://forum.onefinitycnc.com/t/battery-powered-dry-run-laser-suggestions/30481 "2025-01-16T02:05:27Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![JoeB1](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@JoeB1](https://forum.onefinitycnc.com/u/JoeB1)\
**Post date:** [January 16, 2025, 2:05am UTC](https://forum.onefinitycnc.com/t/battery-powered-dry-run-laser-suggestions/30481/1 "2025-01-16T02:05:27Z")

</div>

Hi All,  
I’m interested in attaching a battery powered laser pointer to my spindle bracket for dry runs. I see posts on connecting an external powered laser but nothing about a battery powered one. Has anyone done this? Any recommendations on bracketry? Anyone found a good pointer for this? My thinking is that it’s simple to just manually turn it on when doing dry runs. Seems like a lot of work to wire it into a relay etc. etc. Am I missing something?  
Thanks.

---

<div class="post-metadata">

**Author:** ![lucasjhayden](https://avatars.discourse-cdn.com/v4/letter/l/c5a1d2/32.png) [@lucasjhayden](https://forum.onefinitycnc.com/u/lucasjhayden)\
**Post date:** [January 16, 2025, 6:25pm UTC](https://forum.onefinitycnc.com/t/battery-powered-dry-run-laser-suggestions/30481/2 "2025-01-16T18:25:50Z")

</div>

One option is to get a bore sight for a gun’s scope setup, or for archery. If you find a low profile one you can just put it in the collet of your spindle and that would give you a very good reference for the bit travel. The one attached below is for archery, after a quick google search.

 ![image](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/c/5/c584151d42829d2f6b7418735cdcf87bb663ebaa.jpeg)

---

<div class="post-metadata">

**Author:** ![pwpacp](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/pwpacp/32/1718_2.png) [@pwpacp](https://forum.onefinitycnc.com/u/pwpacp)\
**Post date:** [January 17, 2025, 1:23pm UTC](https://forum.onefinitycnc.com/t/battery-powered-dry-run-laser-suggestions/30481/3 "2025-01-17T13:23:54Z")

</div>

That is exactly what I did and found one that fits the 1/4" collet with a length that approximates a standard bit. So far it works very well too.

---

<div class="post-metadata">

**Author:** ![MSchienle](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mschienle/32/3304_2.png) [@MSchienle](https://forum.onefinitycnc.com/u/MSchienle)\
**Post date:** [January 17, 2025, 2:01pm UTC](https://forum.onefinitycnc.com/t/battery-powered-dry-run-laser-suggestions/30481/4 "2025-01-17T14:01:17Z")

</div>

Phil, would you happen to have a link or more details on what you have? That sounds perfect.

---

<div class="post-metadata">

**Author:** ![pwpacp](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/pwpacp/32/1718_2.png) [@pwpacp](https://forum.onefinitycnc.com/u/pwpacp)\
**Post date:** [January 18, 2025, 12:08am UTC](https://forum.onefinitycnc.com/t/battery-powered-dry-run-laser-suggestions/30481/5 "2025-01-18T00:08:33Z")

</div>

Mike, this is the one I got on Amazon. It came with different size o-rings so I simply put the clear ones on the shaft with the installed black ones in the grooves.  
Note, I also do the test run with the z-probed at least .5" high and the router off (of course).

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/a/1a9c2ed19b1c19fd2d269d471a1008bd845660c1.jpeg) ](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/1/a/1a9c2ed19b1c19fd2d269d471a1008bd845660c1.jpeg)

---

<div class="post-metadata">

**Author:** ![MSchienle](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mschienle/32/3304_2.png) [@MSchienle](https://forum.onefinitycnc.com/u/MSchienle)\
**Post date:** [January 18, 2025, 1:32am UTC](https://forum.onefinitycnc.com/t/battery-powered-dry-run-laser-suggestions/30481/6 "2025-01-18T01:32:35Z")

</div>

Many thanks, Phil. I seemed to be stuck on MidTen products and not finding anything that seemed like a good match.

---

<div class="post-metadata">

**Author:** ![JoeB1](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@JoeB1](https://forum.onefinitycnc.com/u/JoeB1)\
**Post date:** [January 30, 2025, 3:30am UTC](https://forum.onefinitycnc.com/t/battery-powered-dry-run-laser-suggestions/30481/7 "2025-01-30T03:30:26Z")

</div>

Thanks all for the recommendations. I’m buying one!
