# Before and After Stepper Motor Resolution Change

**URL:** <https://forum.onefinitycnc.com/t/before-and-after-stepper-motor-resolution-change/29362>\
**Category:** Controller (MASSO) Discussion\
**Created:** [November 15, 2024, 8:30pm UTC](https://forum.onefinitycnc.com/t/before-and-after-stepper-motor-resolution-change/29362 "2024-11-15T20:30:49Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mattia](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mattia/32/26055_2.png) [@Mattia](https://forum.onefinitycnc.com/u/Mattia)\
**Post date:** [November 15, 2024, 8:30pm UTC](https://forum.onefinitycnc.com/t/before-and-after-stepper-motor-resolution-change/29362/1 "2024-11-15T20:30:49Z")

</div>

Hi every one i just want to share the before and the after this change: [Service Bulletin For Elite Masso Stepper Motor Resolution Change](https://forum.onefinitycnc.com/t/service-bulletin-for-elite-masso-stepper-motor-resolution-change/29062) I was engraving a logo on some usb with my opt laser PLH3D-XT-50. With the same file the result is much better. (left is before…)

 ![IMG_0632.HEIC](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/e/bec8d65c2ee56ca3f0e23b0ccce1b219e0548e5f.jpeg)