# Best Fit G-Code for Controller

**URL:** <https://forum.onefinitycnc.com/t/best-fit-g-code-for-controller/8296>\
**Category:** Controller (Buildbotics) Discussion\
**Created:** [October 15, 2021, 12:53pm UTC](https://forum.onefinitycnc.com/t/best-fit-g-code-for-controller/8296 "2021-10-15T12:53:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Larry](https://avatars.discourse-cdn.com/v4/letter/l/47e85d/32.png) [@Larry](https://forum.onefinitycnc.com/u/Larry)\
**Post date:** [October 15, 2021, 12:53pm UTC](https://forum.onefinitycnc.com/t/best-fit-g-code-for-controller/8296/1 "2021-10-15T12:53:27Z")

</div>

I’m evaluating two Software packages (CamBam & Meshcam) that have a long list of Post Processors for the G-Code export. Some of those choices are:

Linux CNC  
TurboCNC  
Default  
GRBL  
centroid  
comparams  
dynapath  
jtech  
mach3\_mach4  
nccad  
opensbp  
phillips  
rml  
smoothie  
fanuc  
fanuc DK  
mach3

My question is which one is best fit G-Code for the Onefinity Woodworkers Controller which is  
based on the Cambotics (buildbotics) platforms?

Thanks.

Larry

---

<div class="post-metadata">

**Author:** ![ConvenientWoodwork](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/convenientwoodwork/32/22558_2.png) [@ConvenientWoodwork](https://forum.onefinitycnc.com/u/ConvenientWoodwork)\
**Post date:** [October 15, 2021, 1:42pm UTC](https://forum.onefinitycnc.com/t/best-fit-g-code-for-controller/8296/2 "2021-10-15T13:42:52Z")

</div>

GRBL is best fit to my knowledge. At least it is the recommended post processor in other CAM software.

---

<div class="post-metadata">

**Author:** ![cyberreefguru](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/cyberreefguru/32/27385_2.png) [@cyberreefguru](https://forum.onefinitycnc.com/u/cyberreefguru)\
**Post date:** [October 17, 2021, 9:29pm UTC](https://forum.onefinitycnc.com/t/best-fit-g-code-for-controller/8296/3 "2021-10-17T21:29:42Z")

</div>

Agree with Nick; I think smoothie runs a variant of grbl as well (32 bit instead of 8 though). I would suspect “default” would be the most generic since it’s not targeting any specific machine.

-Tom