# Binding Issue Isolated

**URL:** <https://forum.onefinitycnc.com/t/binding-issue-isolated/26423>\
**Category:** Uncategorized\
**Created:** [April 11, 2024, 1:35am UTC](https://forum.onefinitycnc.com/t/binding-issue-isolated/26423 "2024-04-11T01:35:47Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [April 11, 2024, 3:43am UTC](https://forum.onefinitycnc.com/t/binding-issue-isolated/26423/2 "2024-04-11T03:43:15Z")

</div>

Hey Chaosweaver,

> [@Issue with dovetail bit on Morgan Hop’s Wasteboard File](https://forum.onefinitycnc.com/t/issue-with-dovetail-bit-on-morgan-hop-s-wasteboard-file/22425/8):
>
> have you ensured your machine is
> 
> 1. [**rectangular** (“squared”) (_bar gauge_) and 2. **coplanar** (“not twisted”) (_fishing line method_)](https://forum.onefinitycnc.com/t/what-do-i-do-first/18349/6)?
> 
> Surfacing the wasteboard does help nothing if the machine is not accurately rectangular (“squared”) and coplanar (not twisted). All your workpieces including the wasteboard will remain a parallelogram and have a twisted surface if you didn’t ensure that steps 1 and 2 are done accurately.
> 
> Furthermore, if rectangularity and coplanarity are not perfect, the Y movement can block or have “hiccups”.

* * *

---

_[View the full topic](https://forum.onefinitycnc.com/t/binding-issue-isolated/26423)._