# BitSetter in the future?

**URL:** <https://forum.onefinitycnc.com/t/bitsetter-in-the-future/412>\
**Category:** Accessories\
**Created:** [July 23, 2020, 4:39am UTC](https://forum.onefinitycnc.com/t/bitsetter-in-the-future/412 "2020-07-23T04:39:06Z")\
**Posts on this page:** 1\
**Showing post:** 17

<div class="post-metadata">

**Author:** ![BNB187](https://avatars.discourse-cdn.com/v4/letter/b/f19dbf/32.png) [@BNB187](https://forum.onefinitycnc.com/u/BNB187)\
**Post date:** [January 14, 2021, 3:27am UTC](https://forum.onefinitycnc.com/t/bitsetter-in-the-future/412/17 "2021-01-14T03:27:42Z")

</div>

I also should have mentioned that due to  
the many possible combinations of router/spindle and Z slider configurations the Z heights may need to be altered to suit your setup.

This was written with Makita with Z on lowest position and a 3/4” wasteboard.

---

_[View the full topic](https://forum.onefinitycnc.com/t/bitsetter-in-the-future/412)._