# Brand new with Easel Pro

**URL:** <https://forum.onefinitycnc.com/t/brand-new-with-easel-pro/8960>\
**Category:** Easel\
**Created:** [November 15, 2021, 9:02pm UTC](https://forum.onefinitycnc.com/t/brand-new-with-easel-pro/8960 "2021-11-15T21:02:41Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![BrianHill](https://avatars.discourse-cdn.com/v4/letter/b/e9bcb4/32.png) [@BrianHill](https://forum.onefinitycnc.com/u/BrianHill)\
**Post date:** [November 15, 2021, 9:02pm UTC](https://forum.onefinitycnc.com/t/brand-new-with-easel-pro/8960/1 "2021-11-15T21:02:41Z")

</div>

Struggling to get started. I have Easel Pro and when I go to set up my machine, it says to turn on machine and plug in the usb cable. Nothing happens.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 15, 2021, 9:10pm UTC](https://forum.onefinitycnc.com/t/brand-new-with-easel-pro/8960/2 "2021-11-15T21:10:26Z")

</div>

no computer will every directly connect to the onefinity controller, since it is a computer itself.

> [@Creating a file in Inventables Easel](https://forum.onefinitycnc.com/t/creating-a-file-in-inventables-easel/1078):
>
> It’s a bit confusing to Onefinity users that use Easel as the CAD program. Onefinity has a ‘smart’ controller. You will NEVER directly connect your computer to the Onefinity controller or need to download any ‘drivers’. Inventables has a ‘dumb’ controller that REQUIRES the computer/easel to be connected to their controller at all times. This requires ‘drivers’ to be downloaded for xcarve users. Onefinity users should NEVER download the drivers as you will not use them. It’s a bit confusing,…
