# Camera not displaying on web interface

**URL:** <https://forum.onefinitycnc.com/t/camera-not-displaying-on-web-interface/5939>\
**Category:** Webcam\
**Created:** [June 5, 2021, 6:32pm UTC](https://forum.onefinitycnc.com/t/camera-not-displaying-on-web-interface/5939 "2021-06-05T18:32:00Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Watkins](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/watkins/32/3188_2.png) [@Watkins](https://forum.onefinitycnc.com/u/Watkins)\
**Post date:** [June 5, 2021, 6:32pm UTC](https://forum.onefinitycnc.com/t/camera-not-displaying-on-web-interface/5939/1 "2021-06-05T18:32:00Z")

</div>

I connected a web cam to the controller and it’s showing on the OneFinity display, but not in the browser web interface on my Mac. Everything is on the same network and I can successfully connect to the OFWW and send G Code. I searched the forums but didn’t find a solution; any ideas?

 ![Screen Shot 2021-06-05 at 1.27.07 PM](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/8/d/8dcf37280914223546df1e1e1ddb8edffff8dc34.png)

---

<div class="post-metadata">

**Author:** ![wsj-productions](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/wsj-productions/32/2903_2.png) [@wsj-productions](https://forum.onefinitycnc.com/u/wsj-productions)\
**Post date:** [June 5, 2021, 6:43pm UTC](https://forum.onefinitycnc.com/t/camera-not-displaying-on-web-interface/5939/2 "2021-06-05T18:43:09Z")

</div>

Following. My camera works but super choppy

---

<div class="post-metadata">

**Author:** ![Watkins](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/watkins/32/3188_2.png) [@Watkins](https://forum.onefinitycnc.com/u/Watkins)\
**Post date:** [June 8, 2021, 12:06pm UTC](https://forum.onefinitycnc.com/t/camera-not-displaying-on-web-interface/5939/3 "2021-06-08T12:06:50Z")

</div>

I’m using a Mac with Safari, so I should have tried this sooner, but it appears to be a browser issue. Switching to Chrome seems to work fine.

OneFinity support got back with me quickly with the recommendation.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [June 8, 2021, 3:54pm UTC](https://forum.onefinitycnc.com/t/camera-not-displaying-on-web-interface/5939/4 "2021-06-08T15:54:03Z")

</div>

It seems to be a limitation of Safari (missing a codec or otherwise.)

---

<div class="post-metadata">

**Author:** ![dj007](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/dj007/32/2767_2.png) [@dj007](https://forum.onefinitycnc.com/u/dj007)\
**Post date:** [December 28, 2021, 4:29am UTC](https://forum.onefinitycnc.com/t/camera-not-displaying-on-web-interface/5939/5 "2021-12-28T04:29:04Z")

</div>

did you fix this i can get my webcam to work and I’m using a pc .