# Can't reset gcode (solved in 1.4.9)

**URL:** <https://forum.onefinitycnc.com/t/cant-reset-gcode-solved-in-1-4-9/37736>\
**Category:** Feature Request\
**Created:** [March 4, 2026, 2:07pm UTC](https://forum.onefinitycnc.com/t/cant-reset-gcode-solved-in-1-4-9/37736 "2026-03-04T14:07:59Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Greenley](https://avatars.discourse-cdn.com/v4/letter/g/2acd7d/32.png) [@Greenley](https://forum.onefinitycnc.com/u/Greenley)\
**Post date:** [March 4, 2026, 2:07pm UTC](https://forum.onefinitycnc.com/t/cant-reset-gcode-solved-in-1-4-9/37736/1 "2026-03-04T14:07:59Z")

</div>

Redline HMI with Gen2Foreman. I was testing the estop and the code stopped on line 3, now I can’t escape line 3, reset, goto line, reload all leave me on line three, even if I open another program I am on line 3. Have also clicked on line 1, it does not seem like I should have to reboot to go back to line 1. Any ideas? I have firmware 1.4.6.

Thanks

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [March 4, 2026, 2:14pm UTC](https://forum.onefinitycnc.com/t/cant-reset-gcode-solved-in-1-4-9/37736/2 "2026-03-04T14:14:43Z")

</div>

Have you tried a reboot?

---

<div class="post-metadata">

**Author:** ![Greenley](https://avatars.discourse-cdn.com/v4/letter/g/2acd7d/32.png) [@Greenley](https://forum.onefinitycnc.com/u/Greenley)\
**Post date:** [March 4, 2026, 2:31pm UTC](https://forum.onefinitycnc.com/t/cant-reset-gcode-solved-in-1-4-9/37736/3 "2026-03-04T14:31:26Z")

</div>

Yes, and of course reboot puts me back to line 1, but it does seem like the reset button, or goto line should also do that. What are those for if not for something like that?

---

<div class="post-metadata">

**Author:** ![Redlinecnc](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/redlinecnc/32/32571_2.png) [@Redlinecnc](https://forum.onefinitycnc.com/u/Redlinecnc)\
**Post date:** [March 4, 2026, 4:17pm UTC](https://forum.onefinitycnc.com/t/cant-reset-gcode-solved-in-1-4-9/37736/4 "2026-03-04T16:17:14Z")

</div>

If you press the “Abort” button, then “Reset”, then “Start”, it will allow you to start the carve over. This will help until the “jump to Line” feature is refined.

---

<div class="post-metadata">

**Author:** ![RTCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/rtcnc/32/33487_2.png) [@RTCNC](https://forum.onefinitycnc.com/u/RTCNC)\
**Post date:** [March 4, 2026, 7:49pm UTC](https://forum.onefinitycnc.com/t/cant-reset-gcode-solved-in-1-4-9/37736/5 "2026-03-04T19:49:54Z")

</div>

Just to add to this conversion: version 1.4.9 has been released which should address the e-stop behavior without requiring the user to also hit the abort button.