# Carbide Create G-code June 30, 2023 no longer works **URL:** \ **Category:** Carbide Create\ **Created:** [July 11, 2023, 2:12am UTC](https://forum.onefinitycnc.com/t/carbide-create-g-code-june-30-2023-no-longer-works/21380 "2023-07-11T02:12:16Z")\ **Posts on this page:** 1\ **Showing post:** 2
**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\ **Post date:** [July 11, 2023, 3:48am UTC](https://forum.onefinitycnc.com/t/carbide-create-g-code-june-30-2023-no-longer-works/21380/2 "2023-07-11T03:48:14Z")
> [@Carbide Create V652 Installer Link](https://forum.onefinitycnc.com/t/carbide-create-v652-installer-link/13889): > > Carbide Create V652 Install Link. Windows: Mac: You MUST change the post processor to GRBL before exporting gcode to the Onefinity. When using Carbide Create (previous to Version 7, as 7 and above are incompatible with gcode exporting unless you use the pro (paid version)), as your design software, you’ll want to make sure you select the correct post processor before you save your gcode. If you save the gcode with default settings it will add the probing code ( M6 command) that will as… --- _[View the full topic](https://forum.onefinitycnc.com/t/carbide-create-g-code-june-30-2023-no-longer-works/21380)._