# Carpentopod (inspiration)

**URL:** <https://forum.onefinitycnc.com/t/carpentopod-inspiration/28722>\
**Category:** Finished Projects\
**Created:** [September 22, 2024, 7:52am UTC](https://forum.onefinitycnc.com/t/carpentopod-inspiration/28722 "2024-09-22T07:52:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [September 22, 2024, 7:52am UTC](https://forum.onefinitycnc.com/t/carpentopod-inspiration/28722/1 "2024-09-22T07:52:10Z")

</div>

Hey all,

inspiration for the weekend (found on Duglotz):

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/5/b571dd9469a6ae82a67458d4fbc90c97c73c3c9b.jpeg "The Carpentopod table being put to use!") ](https://www.youtube.com/watch?v=xKDY4yWxfJM)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/4/c/4ce697b33679a18e67dd5ea635524d1cdbf27b90.jpeg "Carpentopod - First CNC-ed prototype") ](https://www.youtube.com/watch?v=Aa0xFO4BmbA)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/f/d/fdfa183ac804da5d3d5721a61e7f6bb1382fa2bc.jpeg "Strandbeests - New Living Species Found In The Netherlands") ](https://www.youtube.com/watch?v=GXJWPe4KF9w)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/2/0/20c2c6f6e21dbd99668a1bffcbfffef11e242c49.jpeg "Carpentopod - Side-by-side with Jansen's Strandbeest linkage") ](https://www.youtube.com/watch?v=k4qrjD_HK4E)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/a/1/a1a016ecee2868339071c8534986ccf171c1aa51.jpeg "Carpentopod - Powering up the first section") ](https://www.youtube.com/watch?v=GyZDItwtMWM)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/8/b/8b0045fdf363788f88c4632f874ef6c50b9e4952.jpeg "Carpentopod - Passive walking") ](https://www.youtube.com/watch?v=R5b97QwAwxg)

– Source: [https://decarpentier.nl](https://decarpentier.nl)  
[https://youtube.com/giliamdecarpentier](https://youtube.com/giliamdecarpentier)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/d/bd0c4ba4b82d44772609d54f804d8765eb7781fe.jpeg)](https://shop.heise.de/make-1-2016/Print)

---

<div class="post-metadata">

**Author:** ![SailorMike](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sailormike/32/3290_2.png) [@SailorMike](https://forum.onefinitycnc.com/u/SailorMike)\
**Post date:** [September 22, 2024, 7:14pm UTC](https://forum.onefinitycnc.com/t/carpentopod-inspiration/28722/2 "2024-09-22T19:14:27Z")

</div>

Wow, I wish I could rec this more than once! Bravo! Please, give us some more details about how your table was built and how it is controlled.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [March 13, 2026, 12:03am UTC](https://forum.onefinitycnc.com/t/carpentopod-inspiration/28722/3 "2026-03-13T00:03:01Z")

</div>

Who’s going to build this first? 🙂