# Carving concrete

**URL:** <https://forum.onefinitycnc.com/t/carving-concrete/5214>\
**Category:** Uncategorized\
**Created:** [April 24, 2021, 9:08pm UTC](https://forum.onefinitycnc.com/t/carving-concrete/5214 "2021-04-24T21:08:52Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![JRedman](https://avatars.discourse-cdn.com/v4/letter/j/a6a055/32.png) [@JRedman](https://forum.onefinitycnc.com/u/JRedman)\
**Post date:** [April 24, 2021, 9:08pm UTC](https://forum.onefinitycnc.com/t/carving-concrete/5214/1 "2021-04-24T21:08:52Z")

</div>

Has anyone used their Onefinity to carve concrete or pavers?

---

<div class="post-metadata">

**Author:** ![alden](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/alden/32/161_2.png) [@alden](https://forum.onefinitycnc.com/u/alden)\
**Post date:** [April 25, 2021, 12:44pm UTC](https://forum.onefinitycnc.com/t/carving-concrete/5214/2 "2021-04-25T12:44:18Z")

</div>

I have not tried it but am confident that it would work well using a diamond bit.