# Changes since 2022?

**URL:** <https://forum.onefinitycnc.com/t/changes-since-2022/25009>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [January 29, 2024, 1:18pm UTC](https://forum.onefinitycnc.com/t/changes-since-2022/25009 "2024-01-29T13:18:23Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [January 29, 2024, 5:03pm UTC](https://forum.onefinitycnc.com/t/changes-since-2022/25009/2 "2024-01-29T17:03:09Z")

</div>

Hey John,

> [@johnwillyn](#):
>
> 1. Will the current models fit my frame?

yes, because the footprint of the PRO/Original Series and the Elite Series is identical. The only difference is the different stepper motors, and the Touch monitor vs. Touch Display CNC controller and its mounting arm. Also the PRO and Elite now have small 30 mm drag chains, but if you follow the link to “space to reserve around the machine”, there remains no difference.

You may use the dimensions I put together in this post:

> [@Elite woodworker actual foot print](https://forum.onefinitycnc.com/t/elite-woodworker-actual-foot-print/24713/5):
>
> this link regarding X-50, Pro, and Elite Journeyman may be of help for you. **For Woodworker, just substract 16" from width compared to Journeyman.** Depth is identical (two Y-35 rails).
> 
> - [**Journeyman (X-50, Pro and Elite) footprint**, dimensions, and space to reserve around the machine for a table or enclosure](https://forum.onefinitycnc.com/t/cable-and-vac-management-to-start-off/18753/14)
> 
> Stepper motors length dimensions may have changed slightly with the new steppers offered (stronger PRO motors or Z stepper motor with brake).

> [@johnwillyn](#):
>
> 1. The weight of the WW Pro + QCW + Rolling Stand in case I need to suspend this from the ceiling to fit it into my workflows.

I just can tell what my Journeyman X-50 and the QCW frame weighs, what I [reported here](https://forum.onefinitycnc.com/t/total-packages-weight-for-journeyman-and-woodworker/10934/2). I have no rolling stand.

---

_[View the full topic](https://forum.onefinitycnc.com/t/changes-since-2022/25009)._