# Clamping & dust collection on wallmounted onefinity CNC

**URL:** <https://forum.onefinitycnc.com/t/clamping-dust-collection-on-wallmounted-onefinity-cnc/22729>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [October 11, 2023, 12:52am UTC](https://forum.onefinitycnc.com/t/clamping-dust-collection-on-wallmounted-onefinity-cnc/22729 "2023-10-11T00:52:08Z")\
**Posts on this page:** 3\
**Page:** 2

<div class="post-metadata">

**Author:** ![ConvenientWoodwork](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/convenientwoodwork/32/22558_2.png) [@ConvenientWoodwork](https://forum.onefinitycnc.com/u/ConvenientWoodwork)\
**Post date:** [November 6, 2023, 12:09am UTC](https://forum.onefinitycnc.com/t/clamping-dust-collection-on-wallmounted-onefinity-cnc/22729/21 "2023-11-06T00:09:49Z")

</div>

My machine is mounted on the wall and I originally intended to use t-track clamping solutions (and did for a while), however I eventually found that using the plastic brads was waaay less work and equally (if not more) effective.

---

<div class="post-metadata">

**Author:** ![SundownWoodworks](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/sundownwoodworks/32/5367_2.png) [@SundownWoodworks](https://forum.onefinitycnc.com/u/SundownWoodworks)\
**Post date:** [November 11, 2023, 5:59am UTC](https://forum.onefinitycnc.com/t/clamping-dust-collection-on-wallmounted-onefinity-cnc/22729/22 "2023-11-11T05:59:52Z")

</div>

Hi Nick. I’ve seen others go the brad route. I’m primarily carving glued up stock, and often need to hold a slightly cupped blank from lifting away from the bed. The old CNC table my new Elite now runs on has no T-track, and I screw my low clearance clamps into the wasteboard. I’m getting used to the T-track after using it all week.

---

<div class="post-metadata">

**Author:** ![HardtailSr](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/hardtailsr/32/35326_2.png) [@HardtailSr](https://forum.onefinitycnc.com/u/HardtailSr)\
**Post date:** [January 25, 2026, 4:32pm UTC](https://forum.onefinitycnc.com/t/clamping-dust-collection-on-wallmounted-onefinity-cnc/22729/23 "2026-01-25T16:32:13Z")

</div>

I make these clamps and they do not interfere with the dust collection.

> **[Ultra-low profile clamping that works | Enhance Precision – Shop Now](https://www.hilljackfab.com/)**
>
> Explore ultra-low profile CNC clamps designed to enhance machining accuracy and prevent bit breakage, suitable for various materials and CNC setups.

 ![clamps fixture](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/6/9/6917f3b835ade29f74048b7e9e5fcf46c9f6e1a7.jpeg)

[Previous page](https://forum.onefinitycnc.com/t/clamping-dust-collection-on-wallmounted-onefinity-cnc/22729.md?page=1)