# Closed loop upgrade with BB controller

**URL:** <https://forum.onefinitycnc.com/t/closed-loop-upgrade-with-bb-controller/22907>\
**Category:** Original/PRO Series (Buildbotics) (Gen 1)\
**Created:** [October 21, 2023, 6:14pm UTC](https://forum.onefinitycnc.com/t/closed-loop-upgrade-with-bb-controller/22907 "2023-10-21T18:14:18Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jeremiah7191](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jeremiah7191/32/25809_2.png) [@Jeremiah7191](https://forum.onefinitycnc.com/u/Jeremiah7191)\
**Post date:** [October 21, 2023, 6:14pm UTC](https://forum.onefinitycnc.com/t/closed-loop-upgrade-with-bb-controller/22907/1 "2023-10-21T18:14:19Z")

</div>

Good afternoon,  
I’m coming from the laser world and wondering if the DB15 breakout connector would allow me to upgrade the steppers on my X50 woodworker with a BB controller to closed loop steppers?  
I’ve done it on my Co2 with a Ruida controller, but not familiar with the BB controller just yet.  
Thanks in advance.

---

<div class="post-metadata">

**Author:** ![349iq2345](https://avatars.discourse-cdn.com/v4/letter/3/bb73d2/32.png) [@349iq2345](https://forum.onefinitycnc.com/u/349iq2345)\
**Post date:** [October 21, 2023, 6:48pm UTC](https://forum.onefinitycnc.com/t/closed-loop-upgrade-with-bb-controller/22907/2 "2023-10-21T18:48:32Z")

</div>

Hey Jeremiah,

> [@Jeremiah7191](#):
>
> wondering if the DB15 breakout connector would allow me to upgrade the steppers on my X50 woodworker with a BB controller to closed loop steppers?

yes, the [Buildbotics.com](http://Buildbotics.com) controller [allows exactly that](https://buildbotics.com/manual-v1-0-2/#15pinauxilliaryioport). But there is no such connector on Onefinity’s software and hardware [fork](https://en.wikipedia.org/wiki/Fork_(software_development)) of the Buildbotics controller.

[Buildbotics.com](http://Buildbotics.com) introduced that auxiliary connector after one user really succeeded with accessing to the solder points for STEP±{X,Y,Z,A}, DIR±{X,Y,Z,A}, Motor Enable, and Alarm on the [AVR Mainboard](https://buildbotics.com/main-board/) ([gerber source](https://github.com/buildbotics/bbctrl-pcb/blob/master/doc/buildbotics_controller-pcb-v13.0.pdf)) and demonstrated the use of external stepper drivers (thereby bypassing the internal [Texas Instruments DRV8711](https://www.ti.com/product/DRV8711) stepper drivers). But Onefinity generally does not [backport](https://en.wikipedia.org/wiki/Backporting) any new things, neither hardware nor firmware.

I had a look at the pcb, and although I am an experienced solderer, I would say, if you want to attempt this on [Onefinity’s pcb](https://github.com/OneFinityCNC/onefinity-pcb/blob/master/Gerber/controller-gerber-rev5.pdf), good luck! ☹ Better buy a Buildbotics controller that has the [15-pin D-Sub auxiliary connector](https://buildbotics.com/manual-v1-0-2/#15pinauxilliaryioport).

 ![Buildbotics_controller_-_Back_Panel](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/b/2/b289fc42736303247e4714300ceedf36372d9734.png)  
Image 1: **Buildbotics** CNC Controller

 ![Onefinity_controller_-_Back_Panel](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/2/0/207342f2cf455babcd8f0ce45a7f2f036cf332cb.png)  
Image 2: **Onefinity** CNC Controller

* * *

EDIT: Link to Onefinity pcb gerber file repaired.

---

<div class="post-metadata">

**Author:** ![Jeremiah7191](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jeremiah7191/32/25809_2.png) [@Jeremiah7191](https://forum.onefinitycnc.com/u/Jeremiah7191)\
**Post date:** [October 23, 2023, 5:49pm UTC](https://forum.onefinitycnc.com/t/closed-loop-upgrade-with-bb-controller/22907/3 "2023-10-23T17:49:04Z")

</div>

Makes perfect sense! I’m pretty comfortable around a soldering station as well, but I’m not set up to do “board based” mods any longer.  
Thanks for the information!

---

<div class="post-metadata">

**Author:** ![RogueMachinist](https://avatars.discourse-cdn.com/v4/letter/r/90ced4/32.png) [@RogueMachinist](https://forum.onefinitycnc.com/u/RogueMachinist)\
**Post date:** [November 17, 2024, 4:08pm UTC](https://forum.onefinitycnc.com/t/closed-loop-upgrade-with-bb-controller/22907/4 "2024-11-17T16:08:39Z")

</div>

Only the elite is getting real upgrades. Looking at real Buildbotics controller or LinuxCNC.

---

<div class="post-metadata">

**Author:** ![RogueMachinist](https://avatars.discourse-cdn.com/v4/letter/r/90ced4/32.png) [@RogueMachinist](https://forum.onefinitycnc.com/u/RogueMachinist)\
**Post date:** [November 18, 2024, 6:42pm UTC](https://forum.onefinitycnc.com/t/closed-loop-upgrade-with-bb-controller/22907/5 "2024-11-18T18:42:54Z")

</div>

I would hold off for now. New things tend to be buggy. Reading the BB controller forum closely. And we still do not know what onefinity has coming.

---

<div class="post-metadata">

**Author:** ![Jeremiah7191](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jeremiah7191/32/25809_2.png) [@Jeremiah7191](https://forum.onefinitycnc.com/u/Jeremiah7191)\
**Post date:** [November 18, 2024, 6:54pm UTC](https://forum.onefinitycnc.com/t/closed-loop-upgrade-with-bb-controller/22907/6 "2024-11-18T18:54:49Z")

</div>

Agreed!!  
Who knows, 1F may come out with a 4x8 elite machine and make it all worth while.

---

<div class="post-metadata">

**Author:** ![OnefinityCNC](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/onefinitycnc/32/7_2.png) [@OnefinityCNC](https://forum.onefinitycnc.com/u/OnefinityCNC)\
**Post date:** [November 18, 2024, 7:42pm UTC](https://forum.onefinitycnc.com/t/closed-loop-upgrade-with-bb-controller/22907/7 "2024-11-18T19:42:49Z")

</div>

You could just do our elite upgrade program through the IPP and get our supported, warrantied masso upgrade to convert your machine to an elite machine.

---

<div class="post-metadata">

**Author:** ![Jeremiah7191](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/jeremiah7191/32/25809_2.png) [@Jeremiah7191](https://forum.onefinitycnc.com/u/Jeremiah7191)\
**Post date:** [November 18, 2024, 7:59pm UTC](https://forum.onefinitycnc.com/t/closed-loop-upgrade-with-bb-controller/22907/8 "2024-11-18T19:59:09Z")

</div>

Yes, yes, I could. Looking at doing that and upgrading to a 48x48 machine, but may wait for the new announcement to make my decision.
