# CNC do unplanned cuts **URL:** \ **Category:** Uncategorized\ **Created:** [September 15, 2024, 1:40pm UTC](https://forum.onefinitycnc.com/t/cnc-do-unplanned-cuts/28618 "2024-09-15T13:40:46Z")\ **Posts on this page:** 1\ **Showing post:** 25
**Author:** ![ChrisM](https://avatars.discourse-cdn.com/v4/letter/c/47e85d/32.png) [@ChrisM](https://forum.onefinitycnc.com/u/ChrisM)\ **Post date:** [September 21, 2024, 7:21am UTC](https://forum.onefinitycnc.com/t/cnc-do-unplanned-cuts/28618/25 "2024-09-21T07:21:13Z")
> [@Franktr](#): > > But I read I believe on the forum that doing so was a waste of time. [This](https://www.youtube.com/watch?v=yA22kTtV4XI) seems to say it is. I use the flexible hose with the metal wire coil. I have run it with that wire grounded and not grounded. No difference. I get a shock when I touch the hose either way. So I believe PVC can’t drain current to a wire. I have never had Z axis affected by it either. But that is mostly because I make sure the hose never touches the metal of the machine - especially the Z slider or motor. > [@How to rout power cord](https://forum.onefinitycnc.com/t/how-to-rout-power-cord/28300/2): > > Here is how I did it --- _[View the full topic](https://forum.onefinitycnc.com/t/cnc-do-unplanned-cuts/28618)._