# CNC platform / table / enclosure

**URL:** <https://forum.onefinitycnc.com/t/cnc-platform-table-enclosure/210>\
**Category:** Accessories\
**Created:** [June 29, 2020, 10:08am UTC](https://forum.onefinitycnc.com/t/cnc-platform-table-enclosure/210 "2020-06-29T10:08:00Z")\
**Posts on this page:** 1\
**Showing post:** 20

<div class="post-metadata">

**Author:** ![mkngjoy](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/mkngjoy/32/225_2.png) [@mkngjoy](https://forum.onefinitycnc.com/u/mkngjoy)\
**Post date:** [September 13, 2020, 9:45pm UTC](https://forum.onefinitycnc.com/t/cnc-platform-table-enclosure/210/20 "2020-09-13T21:45:08Z")

</div>

Here you go. Photos from the end of the right Y cable, but they are all the same connector.

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/d/6/d6750d3b231ae2d9d79d4d641eed8b03c2025144.jpeg)](https://www.sylvester.photo/Robots/CNC/i-h6mD3t2/A)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/4/4f93b4d0a52a3a657afe00589acc0d4f5565f2b8.jpeg)](https://www.sylvester.photo/Robots/CNC/i-2B4V7wR/A)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/2X/5/521fa88187b683b4c3a32c5af6a2730ad0edd171.jpeg)](https://www.sylvester.photo/Robots/CNC/i-QVR5mv5/A)

[![](https://us1.discourse-cdn.com/flex022/uploads/onefinitycnc/original/3X/9/3/93efa490dbab63c320a69c656d12531a5172e3ca.jpeg)](https://www.sylvester.photo/Robots/CNC/i-khDS7kf/A)

---

_[View the full topic](https://forum.onefinitycnc.com/t/cnc-platform-table-enclosure/210)._