# Cnc Table Hindsight 20/20 **URL:** \ **Category:** Gallery\ **Created:** [June 7, 2021, 3:25pm UTC](https://forum.onefinitycnc.com/t/cnc-table-hindsight-20-20/5965 "2021-06-07T15:25:40Z")\ **Posts on this page:** 1\ **Showing post:** 8
**Author:** ![AdamsLeatherWorks](https://sea2.discourse-cdn.com/flex022/user_avatar/forum.onefinitycnc.com/adamsleatherworks/32/954_2.png) [@AdamsLeatherWorks](https://forum.onefinitycnc.com/u/AdamsLeatherWorks)\ **Post date:** [June 7, 2021, 7:00pm UTC](https://forum.onefinitycnc.com/t/cnc-table-hindsight-20-20/5965/8 "2021-06-07T19:00:40Z")
I haven’t built that version of the table yet. My 8-5 and my leather business keep me pretty busy and I have barely gotten to use my CNC - my son has used it more than I have. He and his friend have carved a few topographical pieces out of exotic woods for their Etsy store. This is my table, prior to installing the wasteboard. > [@The Table basic](https://forum.onefinitycnc.com/t/the-table-basic/3787/3): > > I bought the Kreg 44" x 44" base, then glued up two layers of 3/4" MDF measuring 49" x 60". Then I trimmed it with 3/4" oak to help protect the edges of the MDF. There’s about 8-1/2" to the left and right of the machine legs, and there’s probably just enough room front and back to still have room for an enclosure to sit on top of the table. I ran the cords under the table top and didn’t need to splice or buy any extensions. I did buy the cable track from Amazon, but I mounted it pretty close to… --- _[View the full topic](https://forum.onefinitycnc.com/t/cnc-table-hindsight-20-20/5965)._